Watches Review


by DTIME International on 08 November 2018

Hi guys, welcome back to our blog section...

 

There are some factories recently making Patek Philippe 5167A-001 Aquanaut. The first good maker for this was V6 Factory (V6F) and was ruling the market for quite a while. After that MP Factory was following with pretty much the same details with V6F except the movement. After mid 2018, PF make a breakthru by making the same models with also armed with A.2824 movement just like MP factory. Suddenly on August 2018, KMF was in the market with the same model of production armed with Miyota based movement.  The strenght of KM factory is on the case shape perfection, very close to genuine.  Those factories are making some perfection on their 5167A-001 build. However, since the caseback is open, there always be a flaws on movement look, because they are using Miyota or A.2824 movement which clearly smaller compare to genuine patek calibre 324 movement.

Contributing to the competition, one of well known factory, ZF also make this Patek 5167A-001 with some more perfection to what is available from other factories as I mention above. Here i will give you 5 reasons why you should choose this Patek 5167A-001 made by ZF :

 

 

NO 1 : PERFECT DIMENSION AND PACKAGING

 

40mm case size, and 8.5mm case thickness is the genuine dimension. And ZF comes extremely match with what it should be :

When you talk about packaging, PF was leading the market with quite nice Patek paper box on every of their Patek build. However, ZF make even better with bigger hard paper box, complete with tags, as you can see below

 

 

NO 2 : BETTER CASE SHAPE AND FINISHES

 

The shape of the case especially from the side has been one of the issue when you compare other factories. However ZF made the shape even better on their build. 

The only issue is the crown size is still a little bit too big when you compare to genuine. Apart from that issue, ZF made the case perfectly on shape and case brushed finishes compare to other factory available.

 

 

NO 3 : THE BEST DIAL DETAILS AND COLOR

 

As you know, Patek aquanaut has a very unique dial, a combination of block pattern dial with a very uniqe black to grey dial gradation. This is probably the hardest part to be replicated. Some other factory are good enough to replicate this dial, but ZF made even better especially on shiny effect under light circumtences. Below are some of pictures of ZF Patek Aquanaut dial :

 

 

NO 4 : BETTER MOVEMENT DETAILS

 


  • By using the same Miyota 9015 movement based, ZF successfully created better looks and details to copy Calibre 324CS. The main plate movement is bigger compare to other factories, and this will create smaller gap between case and the movement edge, just like genuine.
  • All engravings on the movement are perectly replicated neatly by ZF
  • ZF using Platinum plated movement plate and rotor which is made according to the genuine movement, the best looking 324CS Movement (it is the only version on the market which has the same position of balance wheel as the genuine, High-quality polish finished and slim movement plate.)

 

 

NO 5 : BETTER DATE FONT STYLE AND SIZE

 

As far as I can see, the date font size is bigger compare to other factories, and the font style is correct. 

 

 

GRAB THIS PERFECT PATEK PHILIPPE AQUANAUT REPLICA HERE

 

 

 

 

 



by DTIME International on 18 September 2018

Hi Guys, welcome back to our blog section..

 

Recently there is a factory named VS Facotyr (VSF) known as a good maker of some Panerai now turn to make a best line up of some Omega Iconic models such as Aqua Terra, Seamaster Diver and Seamaster Planet Ocean. They decided this for a good reason, since in 2018 Omega release some new models and they quite ruling the market nowadays. After Aqua Terra and SMPO success, VSF now making new Diver 300m 2018 model with nato and bracelet option. This is very clever move from what I can see, because they know that Omega Diver is one of Omega icon since the beginning of the production. By being the first factory who made this newest model, VSF have a huge chance to win the market in replica industry.

Let see how good this model made by VSF in closer look each parts of the build

One of the strength of this models is the dial. The pattern is very uniqe with wavy dial. The combination of engraved and embossed in the dial part is very nice to see from different angle. And I will say VSF overall make this part nicely. Let's see it deeper :

 

DIAL DETAILS

  • Omega logo is perfectly placed. There is no size and shape issue, as well as the other lettering on Seamaster and Professional words. Those are well replicated.
  • Date wheel is perfectly centerd with proper correct frame, font style and size.
  • All other words at the bottom of pinion are well neat, precisely placed
  • ZrO2 is well engraved as genuine.
  • Most importantly the wavy dial is very nice replicated by VSF

  • What a perfect dial replication, all details are there with preise placement, and neat finishes
  • Hands and hour marker are another instrument to make the dial looks even better from particular angle.

 

 

CASE & BEZEL DETAILS

The ceramic bezel is another strenght of this model. The shiny dial is just match with the shine of bezel insert. The bezel marker has been colorized with correct white color. By normal naked eyes they looks very neat, but when you zoom it, there are some rough painting on the bezel marker part. But it happen when you zoom it.

  • Both setting crown and Helium escape crown are perfectly replicated  from size and dimension.
  • The Omega logo and He logo are nicely embossed. There are rough things on this part
  • Found nothing to complain on this part, those are very nice and acceptable.

 

 

STRAPS

I don't want to talk more on this part. Because the strap is nato which very easy to replicated. VSF nato is very nice and flexible. And most importantly the hardware of the nato strap is engraved with Omega logo and letter.

 

CASEBACK AND MOVEMENT

Co-Axial 8800 has been replicated nicely by VSF. All the details of the movement are properly replicated with good finishes. This is not super clone movement, VSF use Asian 2824 movement as movement base, and they modify it to be close to Co-Axial 8800 with good decoration as you can see on above picture. Let's see it even closer :

Fortunaly i had a chance to zoom the movement part. First, the rotor texturized finish is very nice and neat. Also, the red lettering are perfectly well placed and well engraveds. You can see the sandblasted background is very nice, engraved with red Omega 8800 lettering.

Serial number are there red printed on the outter of the movement as well as 35 jewels words as you can see on above pictures. VSF is very serious on making good looking movement close to genuine. Because they totally aware that this model have open caseback / see thru caseback.

 

At the back of the lug, there are 3 engravings. And VSF replicate it with a good details. And also the outter caseback marker are there with perfect black painting. Even i zoom it, i can't see any rough part on the painting of outter caseback engravings.
 

LUMINOUS

Perfect luminous, very responsive towards  light sources, and it has 2 different colour of the lume. The minute hands and the pearl is greenish, an the rest is blueish colour. This is to make diver easy to notice the marker indicate their time laps under water with green mark.

 

CONCLUSION

  • This is the latest diver model, and it is good to have good replication from VSF.
  • Very reasoneable price to the perfection
  • Armed with Asian 2824 which known as very reliable and accurate movement in replica industry

 

 

GRAB THESE SEAMASTER NEW DIVER 300M FROM VSF HERE



by DTIME International on 16 September 2018

Hi Guys, welcome back to our blog section..

 

Rolex is alwyas be the most demandable brand in replica industry. Therefore, many major factory keep making Rolex models to grab the market demand, and compete each other in the market with their own strength on replicating any particular Rolex models. Submariner, Sea Dweller, Daytona and Date Just are the most famous model that has been replicated by some major replica factory like Noob, JF, ARF, and VRF. Suddenly there is one factory called RE Factory (Return Factory / REF) start following some rookie factories like ARF and VRF on making some Rolexes and aim to follow their success. 

REF decided to make Date Just 41mm model instead of other famous models made by other factories. This is very nice move since Noob is not too serious on making on Date Just 41mm model, and ARF is only make 36mm Date Just. They armed this model with Super Clone 32

  • Nice presentation with plastic Rolex box just like what ARF did
  • I will put 8.5 mark for this factory on overall perfection. They are very serious on making their first batch compete in the market. I can see the build is very solid and most importantly the color and details of the dial are replicated nicely. 
  • Compare to Noob, it is about the same, but i will give REF more credit because in fact they make something a little bit better compare to what Noob did on the same model.

 

DIAL DETAILS

  • I go straight to this part to make sure how good is REF on making this part. The result is positive. the crown logo is very nice and clean, as well as the text printed below. Those details is almost no flaws from what I inspected.
  • The blue color of the dial is also the main thing. The sunburst effect is there with correct blue color as genuine

 

  • REF make all hours and seconds marker precisely. I can't tell any flaws on the size of the marker.
  • Printed text below the pinion are well replicated. I can't see any rough printing on that part. 

  • What a nice cyclops. The date is magnified correctly by the cyclops. On this part, i will say REF beat Noob. 
  • I believe the date font style is no issue, but when i put in on closer zoom, the date actually a little bit rough printed. But when I saw by naked eyes, there is not noticeable. 

 

 

CASE & BEZEL DETAILS

  • This is one of the most important thing on replication. The bezel need to be perfect. And I can see that REF put extra effort to make a perfect shape of flutted bezel with smooth feeling when you touch those bezel teeth.
  • Crown logo is there as it should be, nicely embossed and i found no flaws. 

 

 

BRACELET AND CLASP

Found nothing to complain on this part. The logo on top of the clasp is very nice, as well as all the details at the back of the clasp. 

  • First of all, the bracelet build is very solid and very flexible. There is no any jammed mechanism on the Jubilee each link of the bracelet. Eventhough they make it with 316L steel (while ARF make  36mm date just with 904L steel), but the bracelet steel very nice, shiny and have good feeling when you wear it. 
  • The SEL is perfect, I found no significant gap on this part, the bracelet end link is perfectly intact with the case with no shaky thing caused by SEL gap.
  • The Rolex stamp at the top back of the bracelet is clearly stated how details is REF. While otyher factory missed this part, REF make it more details. You can see on above picture.

 

CASEBACK AND MOVEMENT

This is the most impressive part of this REF build. They armed this model with Super Clone 3235 movement. And I will say that this is the finest build of the movement available in the market. Even if you compare with SA.3135 made by Noob or other factories, they can't beat how precise, details and neat of the movement made by REF. Let's see it closer :

Look at closely on above pictures. All gold engraved letter and logo on the movement are very neat and deep. And most importanly the finish of each movement plate is extra ordinary perfect. Let's see the other part of the movement :

  • All 3235 calibre mandatory details has been replicated precisely and neatly. All engraved letters, all the gears, and the movement structure are way above average, in fact this is the best movement looks i ever seen in the market, no doubt !
  • When i test the movement with Timegrapher, the result is perfect, +/- 1 accuracy, never happen in other Super Clone movement in replica market.

 

 

OTHERS

Super LumiNova is used to make a good and bright blueish luminous. They are very sensitive towards light source. Everything is good on this part.

The LEC is always be questioned by all customers. They think it will be very easy to spot this mark with naked eyes. But when you use magnifier with certain shot angle, you will find. That is how it should be on genuine. And REF wont missed this part as well, the LEC they made is very nice with better dot to make a crown logo invisible. 

 

CONCLUSION

  • There is no doubt that this is the finest Super Clone movement available in the market. Perfectly neat and all the details are well engraved.
  • The movement is very accurate from the test.
  • Pysical build have no issue, very solid piece.

 

 

 

GRAB THIS PERFECT DATE JUST REPLICA MADE BY RE FACTORY HERE

 

 

 



by DTIME International on 15 September 2018

Hi Guys, welcome back to our blog section..

 

Recently there is a factory named VS Facotyr (VSF) known as a good maker of some Panerai now turn to make a best line up of some Omega Iconic models such as Aqua Terra and Planet Ocean. VSF is very good on movement features replication since their break thru on P9000 Super Clone movement on some Panerai model with real copy of date setting feature. They are quite smart to see the opportunity that other factories are not very good on replicating omega movement, therefore they make the newest Omega line up with super nice material build and super clone movement, in this case is 8500 Calibre. All movement features are working 100% like genuine.

After being successful wih Aqua Terra 8605 Super Clone, now they are making a good build of Seamaster Planet Ocean 600m models. Let's see how good the build of this replica is

Overall build is 9 out of 10. They are extremely solid build with perfect finishing on the case and bracelet. When you look at the dial carefully, you will be impressed by the neat on the dial details from hands, date, textured dial, and markers. Let's see it deeper :

 

DIAL DETAILS

  • Omega logo is perfectly placed. There is no size and shape issue, as well as the other lettering on Seamaster and Professional words. Those are well replicated.
  • 12 Marker is one of the issue of this replica by previous factory. But i can see is well aligned on this VSF replica
  • The hands are perfect in size and dimension. Most importantly, those are very neat.

  • What a perfect dial replication, the sandblast is just there perfectly replicate the genuine
  • All hour marker are very neat and precise from what I can see

I never saw any of Omega replica with such details. You can see all parts on the dial is extremely perfect even when i put my camera on zoom mode. And look at the date wheel, even the sanblasted date dial is replicated properly. The black color and texture is another thing, and it is extra ordinary.

 

CASE & BEZEL DETAILS

  • This is one of the most important thing on replication. The bezel need to be perfect. And I can see VSF put extra effort to make a perfect dark grey aluminium bezel insert with such perfect marker, especially on the the pearl, perfecly centered and precise.
  • Domed crystal is there, and the height is correct compare to genuine

  • Both setting crown and Helium escape crown are perfectly replicated  from size and dimension.
  • The Omega logo and He logo are nicely embossed. There are rough things on this part
  • The sandblasted finish on the surface of the two crowns are there perfectly replicated.
  • Bezel teeth and height is also the key of good replication. And i see VSF is quite details to replicate this part as it should be

 

 

BRACELET AND CLASP

I prefer to go for this part first to see, because the bracelet build is nothing to complain. Solid bracelet with perfect finished. All the details on the bracelet are perfectly embossed with such details as you can see on obove pictures. The rest, I will say VSF build is the best among other Omega maker.

 

CASEBACK AND MOVEMENT

This is the first Seamaster Planet Ocean with Super Clone 8500 calibre movement. All details are perfecly replicated, and when you see the screws in the movement, those are real screws, not decartion screw like on previous Omega SMPO build by other factory. Let's see more details of super clone 8500 calibre made by VSF. But before go to the movement, i will show you the caseback part first :

All details on outter caseback are very nice. Every details are replicated nicely with very good engravings and details as you can see on above pictures. Now, let's see the detail of the movement :

Fortunaly i had a chance to zoom the movement part. First, the rotor texturized finish is very nice and neat. Also, the red lettering are perfectly well placed and well engraveds. You can see the sandblasted background is very nice, engraved with red Omega 8500 lettering.

I will say huge weldone to VSF. Every details of 8500 Omega Calibre are perfectly replicated with such details and most importantly, those are very neat.

 

LUMINOUS

Very packaging with Omega tag and Omega warranty card. Nothing bad on this part.Perfect luminous, very responsive towards  light sources, and better lasting compare to other previous SMPO  build, made by other factory.

 

CONCLUSION

  • This is the best Omega Seamaster Planet Ocean 600m replica in the market, made by VS Factory (VSF)
  • Perfect dial details
  • Movement perfection with Super Clone will make your replica become real, because on this VSF made is the only replica of SMPO with independent hour hands on date setting as it should be on genuine. No issue of stability. 

 

SEE HOW THE DATE SETTING WORKS ON BELOW VIDEO

 

 

 

 

 

 

 



by DTIME International on 11 September 2018

Hi Guys, welcome back to our blog section..

 

Another best line up in September 2018 is Omega Aqua Terra GMT made by VS  Factory (VSF). And as replica market update, I should tell you that VSF now start focusing themself on making some omega model, especially on some highly demanded model such as Planet Ocean and Aqua Terra. VSF is very good on movement features replication since their break thru on P9000 Super Clone movement on some Panerai model with real copy of date setting feature. They are quite smart to see the opportunity that other factories are not very good on replicating omega movement, therefore they make the newest Omega line up with super nice material build and super clone movement. All movement features are working 100% like genuine.

The model that I am just about to talk is Omega Aqua Terra GMT made recently by VSF. I was impressed by the looks and build, and i even more impressed by the movement features. Lets see how good this model is. 

Overall build is 9 out of 10. They are extremely solid build with perfect finishing on the case and bracelet. When you look at the dial carefully, you will be impressed by the neat on the dial details from hands, date, textured dial, and markers. Let's see it deeper :

 

CASE AND DIAL

Can you see how details is the build? The GMT hands with red tip is simply nice and neat. And most importantly I saw the hour marker is extremely perfect. The height and the finish is just awesome.

I never saw any of Omega replica with such details. You can see all parts on the dial is extremely perfect even when i put my camera on zoom mode. And look at the date wheel, even the sanblasted date dial is replicated properly. The black color and texture is another thing, and it is extra ordinary.

I am not sure you will complain on this parts :  

  • The Omega logo is well placed, as well as the Seamaster printing and red GMT emboss. I personally have no complain, because when you see it in normal view (not zoomed), those are even more perfect looks.
  • All printed lettering are very neat, i didn't find any rough printing on that parts, and the 24 hours printed marker are well printed as well.

 

The Omega logo on the crown is very nice, and as you can see the sanblasted finished on the surface of the crown is just perfect.

 

BRACELET AND CLASP

I prefer to go for this part first to see, because the bracelet build is nothing to complain. Solid bracelet with perfect finished. All the details on the bracelet are perfectly embossed with such details as you can see on obove pictures. The rest, I will say VSF build is the best among other Omega maker.

 

CASEBACK AND MOVEMENT

This is the first Aqua Terra GMT with Super Clone movement. All details are perfecly replicated, and when you see the screws in the movement, those are real screws, not decartion screw like on previous Omega Aqua Terra build by other factory. Let's see more details of super clone 8605 calibre made by VSF. But before go to the movement, i will show you the caseback part first :

All details on outter caseback are very nice. Every details are replicated nicely with quite good engravings as you can see on above pictures. Now, let's see the detail of the movement :

Fortunaly i had a chance to zoom the movement part. First, the rotor texturized finish is very nice and neat. Also, the red lettering are perfectly well placed and well engraveds. You can see the sandblasted background is very nice, engraved with red Omega 8605 lettering.

Any detail missed? I don't think so. As you can see on above movement pictures, I will say huge weldone to VSF. Every details of 8605 Omega Calibre are perfectly replicated with such details and most importantly, those are very neat.

 

OTHERS

Quite nice packaging with Omega tag and Omega warranty card. Nothing bad on this part.

Perfect luminous, very responsive towards  light sources, and better lasting compare to other previous Aqua Terra build, made by other factory.

 

VARIANTS

VSF made 3 choices on this Aqua Terra line up. Black Dial, blue dial, and two tone case with brown dial. I will say those are perect. Let's see the blue one :

If you love colorized dial, you can go for blue dial. All the details are the same with black. If you love plain dial, you can choose the black one. 

 

CONCLUSION

  • This is the best Omega Aqua Terra replica in the market, made by VS Factory (VSF)
  • Perfect dial details
  • Movement perfection with Super Clone will make your replica become real, because on this VSF made is the only replica of Aqua Terra with independent hour hands on date setting as it should be on genuine. No issue of stability. 

 

SEE HOW THE DATE SETTING WORKS ON BELOW VIDEO

 

 

 

 

 

GRAB THESE AQUA TERRA NEW LINE UP FROM VSF HERE

SEE ANOTHER VSF PERFECT OMEGA REPLICA WITH SUPER CLONE MOVEMENT HERE

 

 

 



by DTIME International on 16 August 2018

Hi guys, welcome back to our blog section...

 

If I didn't get this piece myself, i might not write this topic. But, this watch was drag my attention to see and in fact i feel the build finish is extremely solid. This watch is made by AM Factory (AMF), and it is Maurice Lacroix Masterpiece Square Wheel. It's very unique design watch by having square wheel to indicate the seconds hand of the watch. Besides, the dial is very clean, so that square movement is clearly being center of attention. Let's have a look closer.

 

GENERAL OVERVIEW

There is nothing else than Unique, the whole dial is very clean and simple but there are 3 rounded gears and 1 square box that are moving smoothly as seconds hand of the watch. The sunburst effect is very nice on this model (I took silver dial one), and the power reserve indicator is simply fill in the gap in the dial. This power reserve is 100% working as genuine. The logo is well placed and very clear to identify the brand.

Very clean crystal, barely reflected. And when you look at it from the side, you will see the layer after the layer of gears smoothly moving. The marker is engraved, and barely seen from above the face, but when you see them from side angle, you will see the single tone engraved hour and indicator marker. Besides, the case brushed finished is extremely neat, the shape of the case is very nice. I think AM factory had just replicated this model perfectly.

Super nice movement plat brush finished. Even at the back, this model simply not showing any complexity. Only the mainsprings, 2 power gear, and some ruby, screws and letters. I think, ML156 has just replicated properly by this factory (AMF)

 

 

CLOSER LOOKS - THE DIAL

Super clean dial and well finished by AMF. You can see the logo and the letter of Maurice Lacroix are extremely neat. I believe it required work detail to make this happen, because as you can see that the dial is plain and clean, therefore if any bad on making logo and lettering, it will be noticeable. I will say weldone to AMF on this part

AMF is not playing around on making this replica model. 3 rounded gears are perfecly made as well as the square gear. Combination of inner semi polished line on each brushed gear, is just simply make this part very unique. Not only that, the gear teeth are well made with 100% fitment between round and square gear. Below both unique gears, there are 2 connected sub dial with circular line finished which is adding some more unique shape when you see the gears moving.

The main idea of this watch is simplicity, even the power reserve and hour marker indicator are made with single tone match with the dial. But those are engraved with texturized finishes. The hands are well made, i didn't see any flaws on this part at all. 

 

 

CLOSER LOOK - THE CASE

The blue is not the color, it's only the cover to protect the steel. Different from other model, this brand made the logo embossed instead of engraved. The logo is nice and well made, the crown teeth is smooth when you handle it, no big issue.

First, the shape is very unique, and AMF is replicated perfectly with also perfect brushed finishes along the side of the case. Nothing to complain

42.5 mm case diameter is perfect to accomodate general wrist size, and 14.1mm thickness is good to make the watch looks very solid. In fact, it is very solid build.

 

 

CLOSER LOOK - THE CASEBACK / MOVEMENT

All of the engravings along brushed outter caseback is very deep and neat, almost have nothing to complain on this. I believe there are some different with genuine, but it's not a big issue since AMF made these engraves properlu.

There are only these 2 main things on the caseback, the mainspring and 2 size power reserve gear. I think those are good and I can consider proper replication by AM Factory.

These part is probably the biggest flaws that I easily spotted on this model. The lettering on the movement plate is not as neat as the lettering on the dial. Very rough and over painting. I hope AMF will make some correction in their next version. I can live with this since this is placed at the back of the watch. 

 

 

CLOSER LOOK - THE STRAP AND BUCKLE

I think this model has the best replica strap compare to other model, very soft and flexible. I wont discussed about the buckle, since AMF has made this part properly, i think i might say without any flaws.

 

 

CLOSER LOOK - THE LUME

To be honest, i never think this kind of watch have lumenous. But in fact, there is a blue lume on the hour and minute hands, and on the seconds hands placed on the square gear. Do not expect the lume as good as diver watch, becasue this is totally dress watch. 

 

 

CONCLUSION

Many people going for major mainstream brand like Rolex, Audemars Piguet, or even Richard Mille with high price but sometimes more flaws to accept. When you start turning your mind to start being anti-mainstream by choosing the brand like Maurice Lacroix or any other brands. But you must check if the build is good or not, because mostly non popular brand on replica is not well developed. This model is one of exception, very solid build, worth to the price and most probably less flaws if you compare to high expensive Royal oak offshore or the Richard Mille from KV. This replica is worthy i think.

 

 

GRAB THIS PERFECT MODEL IN OUR WEBSITE HERE



by DTIME International on 15 August 2018

Hi guys, welcome back to our blog section,

 

Today we going to do something different, we wont talk about Rolex or other most discussed model on replica. Instead, we are very impressed of one of Hublot model made by JJ factory (JJF), which is Classic Fusion 38mm. We never expect women watches to be as good as mens watches on replica, and in fact, we expect this Classic Fusion is as normal quality replica. 

However, when we start having this model and start looking at it deeply, we found that the build actually good and very different from the factory picture that we have in the website. The reality is that the bezel width is slimmer compare to the picture, and it is how it should be.

Left picture is factory picture that we have in our side, and the right picture is the real product picture. Glad to have real product is better and closer to genuine. Lets have some deeper look on this model :

 

THE FACE / DIAL

Except from the bezel width, the dial of this replica is very nice and clean. All lettering and marker are well placed and neat. As you can see on above pictures, there is nothihg to complain. 

The date font is correct, quite think as it should be. But there are still some flaws on the finishing, only noticeable when you zoom it. If you see it with normal eyes, it will still looks very good.

Crown is very nice to handle, it is very comfortable. And i have no issue on the crown logo, it is good enough. 

38mm case diameter is consider as small and it will be fit for women, and the thickness is very close to genuine which is 9.5mm. 

 

STRAP & BUCKLE

Very nice brush finished on the lug, and unexpectedly the strap is very flexible, even more flexible if you compare with 42mm verson from the same factory. The engraves are very good on the clasp, no complain.

 

THE MOVEMENT

A little rough finishes, but all the details are replicated properly. This model armed with Asian 2892 movement run on 28800 vph which will create very smooth sweeping hands. Thin case is not the problem for JJF to make silent sounds while the rotor is spinning. Lets have a look closer on movement :

Glad to see all the details are well engraved on this women size watch. Deep enough engraves and even the movement is engraved just like the genuine. Mos importantly this model armed with 2892 asian movement, very stable and reliable. 

 

CONCLUSION

  • Perfect build, nice finishes
  • Reliable movement
  • Very soft strap
  • Clean and neat dial details

 

GRAB THIS PERFECT BUILD FROM JJ FACTORY HERE



by DTIME International on 18 June 2018

Hi guys, welcome back to our blog section....

This topic is Part 3, after giving you guys recommendation on Rolex and Audemars Piguet brand before. Today i will give you some facts and recommendations on other high flying replica , PATEK PHILIPPE 

It is not hard for us to make good recommedation for this brands, because there are not many models build by major factory for Patek Philippe. There are 5 factories build this brand in excellent result of replication : V6 Factory, MK Factory, BP Factory, P Factory, and MP Factory. 

 

THE BEST BUILD MODELS

Those factories keeping up compete each other to build the best Patek replica, most of the time they build the same model due to the fact that the demand is very high on some particular models. We will start to give you recommendation by model reference. This also means that the model we mention below is the best build of Patek Philippe replica. All you need to do is choosing the right factory. Here we go:

 

 

NO. 1 : NAUTILUS 5711 

This model is the most demandable model among all Patek Philippe replica. Some factory keeping up to build as perfect as possible. Be careful, there are 3 factories build this model : V6F, MKF and the new comers P Factory. Which one you should choose?

If you looking for perfect Nautilus 5711 stainless steel bracelet, you must go for P Factory (PF). Why?

  • The dial details is almost perfect, better than other factory made
  • The crown turn is very handy and easy to operate, while other factory have some issue on turning this typical small crown.
  • The bracelet is very solid, and the most important thing is the curve of the bracelet made by PF is more flexible compare to what MK made. 
  • The movement decoration is better and very details

Unfortunately P Factory only make 5 varian of this model so far (click the image to go to the product page) :

 
 
How about leather and gold version? 
Well, we don't really recommend you to go for leather and gold version on any nautilus models, because the leather is not that good and the insert on the strap will easily broken after a while. But if you still want the leather and gold version, you need to go for BP factory. 
 
How about 5890 model? 
You have to accept the fact that the crhonograph is not 100% works due to the limitation of replica movement on single sub dial. If you still want to go for that, you can go for BP Factory V2 HERE
  
How about Iced Out and Annual callendar model ?
Well, again refer to the rules : The more complex the features, the more flaws you will have. If you can accept those flaws, you have no option to choose the one made by small factory with good physical build and details. See iced out best model HERE, and see annual calendar models HERE

 

See all NAUTILUS collection HERE

 

 

NO.2 : AQUANAUT 5167 

Second place if you want to buy Patek Philippe replica, go for Aquanaut model. Be careful, there are 3 factories build this model : V6F, MPF and PF, which one you should choose?

This model firstly build by V6F, it was quite good with Miyota based. After that there is another factory called MP factory that made it with pretty much the same quality. Recently in 2018 after their success of makin nautilus model, PF released new version of Aquanaut, and what they made is way better compare to the other 2 factories. Unfortunately only rubber version available from PF. 

 

What makes PF better ?

  • Better brushed dteail on the bezel
  • Better details on the dial, especially the gradation color of the dial.
  • Very thin case with nice movement details from the back

Click the image to go to the product page :

 

 

 

How about Aquanaut Dual Time? Are there any good?

  • Unfortunatly the answer is NOT that good. In fact, it is not recommended. The dual time is not working and the build details is not as good what PF made on other aquanaut series.
 
How about 5068 ladies model?
Well, you don't have any choice since there is only 1 single factory making these model good replication, it's not major factory, but it is worth as the price. You can see the model HERE
 
How about 5067 ladies model?
Well, you don't have any choice since there is only 1 single factory making these model good replication, it's not major factory, but it is worth as the price. You can see the model HERE

 

We hope this topic will help you to choose the best PATEK PHILIPPE replica among existed in the market. We do this based on our research and some customer feedback. 

 

KEEP FOLLOWING THIS TOPIC, WE WILL GO FOR THE NEXT BRANDS....



by DTIME International on 17 June 2018

Hi guys, welcome back to our blog section...

 

Today we are very honor to do deep review to one of the most unique High grade replica Hublot Big Bang series in the market ; this is Big Bang Sang Bleu 415.NX.1112.VR.MXM16 45mm Hexagonal case and dial. You will never find this model in high grade in other store, because it is very limited production from one of expert watch maker who are successfully build some Roger Dubuis model. And the best thing for us is that this group of watch maker only want to put what they build in our website, especially for this Hublot Sang Bleu model. 

Being the first person to touch this model is such a big honor. Because what they build is extra ordinary from my point of view. Every side of their build is full of perfection, i suggest this is why they only produced limited numbers of production for this model. 

This model is very unique, with hexagonal shape of the bezel, match with 3 layer hexagonal dial which works as seconds hand, minute hands, and hour hands. And not only that, this replica is also mirroring the lates design of rotor which usually called Maxime Büchi geometry design. Well, lets see this replica build in details !

 

THE CASE AND DIAL

  • Please note, that the picture you see is taken from the actual replica build by this watch maker. What a perfect shape of watch, hexagonal brush finished of the bezel is just perfect combined with polished sloping bezel. 
  • Black DLC in the middle layer is very nice with texured finished.
  • The screws is one of Hublot signature. You can see bunch of screw decorating the bezel, the crown guard, and the lug end to tighten the strap. What they made is seriously neat. It is just perfect.
  • The round dial is almost invisible, because they put geometrical shape of the hands. There are 3 layers ; the outter hexagonal dial have double sided arrow as an hour hands, the middle geometric dial also have double sided arrow as minutes hand, and the inner geometric dial is moving 21.600 vph suported by Miyota based movement, works as seconds hand. You can see the video for clear view.
  • Hour marker is not on the dial, they put it as a slopy rehaut with numeric marker. And the minute marker is on the dial below all geometrical hands. It is just simply perfect as it should be on genuine.

  • Very nice DLC texturized finished on mid layer of the case, and again, there are screws decorating the side of the watch. Simply nice !
  • The crown is engraved with new "H" style of logo, and cover with black DLC gear. Feel better to handle while you set the time.
  • The placement of the 3 layer of the case is very tidy. I didn't see any significant gap that will ruin the perfection of this replication.

  • The lug shape is typically Hublot. The end link strengthen by the screw to make strong intact with the strap. 
  • The unique part of this model is that there is always geometrical shape in almost every part of the watch. You can see the lug of this model is engraved with geometrical pattern with brush finished.

 

 

THE MOVEMENT

  • I am impressed of the movement looks, especially when the rotor is turning, it is very unique (you can see how cool is this rotor on the video at the end of this topic)
  • Brushed finished of caseback is as how it supposed to be on genuine, and as always, screw are decorating the caseback on almost every side.
  • Nicely engraved, very neat and deep enough.
  • The shape of the rotor is just how it should be on genuine. This replica is replicating final model of rotor with geometric inscription by Maxime Büchi

 

 

THE STRAP AND BUCKLE

  • The strap is made by rubber with calfskin geometrical printed at the front of the strap. It is very neat rubber strap replication with nice fitment to the lug.
  • I have no complain on this parts at all, well neat replication !

 

 

HOW CLOSE TO GENUINE ?

 

We don't have the genuine in my hand obviously, but we tried to compare with some reliable source of genuine pictures to make quick comparison to see how close this build to genuine. Let's start !

  • The shape is just perfect. i didn't see any flaws on the bezel shape, case shape, and dimension. The build is very precise and solid 
  • Hour marker is very nice, a little bit thin from that picture, but i am sure it should be the same in reality. I was thinkin the "4" marker is a mistake, but it is not, they flip the number start at "4"mark to "8" mark. 
  • Something i found consider as small flaws is on the double sided arrow as pointer of minutes and hands. I found the size of those triangle on the hour hands is bigger compare to the minutes hands on genuine. Howerver, i found those have the same size on replica. But i don't want to complain about it.

 

  • Except for Titanium letter is wrong, i will say that all the detial looks well replicated on this part. And just to let you know, this whole build of this model should be with solid titanium, but on replica is 316L stainless steel with titanium finished.
  • The maker choose Miyota 8N24 as movement base with 21.600 vph highly decorated to be close to genuine HUB1213 calibre. Reliability is the key, that is why they choose Miyota based movement to build this perfect replica.

 

 

WHAT IS THE DIFFERENT WITH AAA GRADE?

 

Well this is the question that we expected from you. Because in fact this model has been replicated earlier on AAA grades. They have 2 version, quartz and automatic on this grade. So what is the different? The answer is HUGE diffferent for sure. Lets check !

  • It is very obvious from the shape, case finishes, and the dial details. You can see on AAA is very rough and the hour marker scale is white color. This is not it supposed to be on genuine, and we believe you can judge those 2 different grades by the picture above.

Well i don't know what to say, you better judge it yourself. Crystal clear !

 

 

DETAIL VIDEO

 

 

CONCLUSION

  • First of all, there are no other seller selling this at this movment, the maker decided to work with us to sell this model. It is very rare, and as you won't find any high grade in the market for this model
  • Perfect solid build from every part of this replica
  • The price is totally worthy to the build that you will have
  • Miyota movement has been choosen for reliability.

 

 

LIMITED STOCK AVAILABLE ONLY IN OUR STORE , NOTHING ELSE ! GRAB THEM FAST HERE



by DTIME International on 23 May 2018

Hi guys, Welcome back to our blog secton...

It is very confusing when every factory keeping up to make exactly the same models. There are so many small differences between those buld. This is what happen to replica of Rolex Submariner 116610 black and green. There are many factories making these 2 models ; Noob, GMF, ARF, VRF, URF, JF etc.

Noob as the mose famous factory of this model is a bit too slow to keep up with other factories after their last version, V7. Finally they release the newest version which is V8. There are some seller called it V8, V8S, or even V9, in fact those are the same piece. There are some options of V8 from noob :

  • With 904L steel material, SA.3135 movement
  • With 904L steel material, A.2836 movement. And
  • With 316L steel material, A.2836 movement.

Unfortunately, those with 904L material are limitely produced, need to wait so long to get that model with 904L steel material. Instead, they produced more on 316L material with 2836 movement. Physically all of those V8 version are the same, the differents are on steel material, and movement. Finally we got chance to compare what is physical upgrades on V8 compare tto V7 previously. Let's see....

 

DIAL AND BEZEL UPGRADES

  • Bezel marker color of Submariner 116610 LN and LV (Black and green) has been an issue since the beginning of its production. That genuine bezel marker is bright platinum color, while what noob made is more into grey (darker) on V7. On V8 they are clearly upgrade this part, the color of bezel marker now is brighter and closer to genuine. However, i still see that it is still in "grey" color instead of platinum color. AR factory still the best on this part, but I appreciate what noob done to upgrade this quite major flaw.
  • On 116610 LV (green) i saw significant upgrade. They produces new green bezel insert with brighter color, and it is what it has to be on genuine. From my experience, the green color is not that match with genuine, i still see VRF version is better, but i appreciate this upgrade from noob.
  • They produce new ceramic bezel insert with better ceramic shine instead of kinda dull color on the V7 previously
  • They claimed that the numeral shape on the bezel is upgraded. As far as i can see, it is not significant change, but i need to compare how consistent they are on making every piece of this model
  • There is no changes on the dial detail. In fact, there is no issue of the dial details since the begining. All good.

 

 

THE CASE AND CROWN UPGRADES

  • They claimed that they produced new case which have better shape on V8 compare to V7. Yes it is, the curved shape of the case is better on V8 compare to V7, and it is closer to genuine case.
  • The crown shape and details si not significantly upgraded as they claimed, but it is upgraded in fact, feel better when you hold and turn it. 
  • The most significant upgrade from what I can see is on the bezel teeth. V8 bezel teeth brushed finish is way closer to genuine, more shiny and when you see from different angle, the visual effect is just like genuine.
  • As addition on the bezel marker upgrade, the depth of the marker is deeper on V8 compare to V7. You can see this from the side on above pictures.

 

 

THE BRACELET AND SEL UPGRADES

  • Since V8 have better curved shape of the case, the endlink of the bracelet have the same height to the case, while on V7 have height gap at the edge of the lug-end part. However, I still see that the sel is not significantly upgraded, it's the same fitment as the V7. On this part, i still see ARF made it better compare to noob
  • I didn't see significant upgrade on the caseback cover. But if you see it closer, noob V8 have sloper caseback cover which created thinner case affect 

V8 have good upgarde on this part. The clasp is very neat and have perfect vitment when you close it as you can see on above picture. There is no gap as oftenly found on V7 clasp.

 

CONCLUSION

  • From the upgrades list above, it is clearly seen that V8 is worth to buy.
  • V8 with 904L steel will have the same physical upgrades as above, the only different is the material of the case and bracelet.
  • 316L steel version only available with A.2836 mvoement, not SA.3135 movement yet. If you want SA.3135 movement you need to get 904L version which have that option. But take it as advantage, since 2836 noob is decorated to be close to genuine calibre 3135, and more reliable movement compare to SA3135 movement.

 

GRAB THIS UPGRADE VERSION OF NOOB SUBMARINER HERE



by DTIME International on 01 May 2018

Hi guys, welcome back to our blog section...

Today, i am not going to talk and make more comment on this topic. The idea is only to show you closer looks of the piece. You can make your own judgment on this. Our pictures on website lists sometimes is not enough for you to decide which one you must choose. Here we give you more pictures and video to see, and hope it will help you to decide easier. 

I have IWC Portuguese Real PR IW500710 V4 ZF 1:1 Blue Dial which is one of the best IWC replica maker compete with ZF Factory. Let's see closer on this nice looking blue watch :

GRAB THIS NICE BLUE PIECE FROM IWC HERE



by DTIME International on 28 April 2018

Hi guys, welcome back to our blog section...

Today, i am not going to talk and make more comment on this topic. The idea is only to show you closer looks of the piece. You can make your own judgment on this. Our pictures on website lists sometimes is not enough for you to decide which one you must choose. Here we give you more pictures and video to see, and hope it will help you to decide easier. 

I have JHF Omega Big Blue 45mm here, and it is from JH Factory which is one of the best omega replica maker compete with OM Factory. Let's see closer on this nice looking blue watch :

What a good loking watch. Blue with orange combo on the bezel, strap and dial, make this piece really sporty. JHF made a fine finishes on the case and bezel.

Very neat and nice dial details. ZrO2 is there and embossed nicely. The logo and all lettering are perfectly replicated, as well as all dial markers.

Polished and brushed finished combination on the case and bezel is very nice

At the back of the lug, there are engravings as it is supposed to be on genuine. I can see JHF is quite details on replicating small details.

Caseback engravings is very nice and neat. Polished caseback is as it should be.

A23J based movement designed and modified to replicate Calibre 8906. Every details of that calibre are there on JHF movement. well replicated, nice finished and neat engravings. 

Blue brushed steel combine with titanium clasp. I think no big issue on this part. Well, as i mentioned before that I will leave you to judge how good this watch is.

GRAB THIS NICE BLUE PIECE HERE

 



by DTIME International on 26 April 2018

Hi guys, welcome back to our blog section...

Today i just received another good piece from new factory in the market ; Great Master Factory (GMF). I was curious how good actually they build Breitling Superocean Chronometre Abyss A1736402. I took the yellow inner bezel as simple as i like that color combo. This breitling is very friendly for you who have small wrist, 42mm diameter is just perfect with it. My first impression? totally surprised with the package and presentation. They include the wath with :

  • Nice plastic box with Japan store sticker. The only thing i concern is only the GMF sticker, shouldn't be there, but no issue, i can just take it out
  • Nice warranty card with match serial number between the watch 
  • Manual book with perfect booklet pouch
  • Extra black yellow strap with buckle. The quality is not very good, but it's extra ordinary for that price.

Well i can say this build is very nice compare to other factory build, super solid with nicely replicated rubber strap, super comfy. Try to compare with genuine pictures, and here are the results :

I believe replica is still replica, but it is very hard to spot major flaws on this build. Everything is perfectly replicated. I think i need to see it closer, and here they are :

No issue with font style of logo, as well as the dimension of the breitling logo. Replica is a little bit rough compare to genuine, but its not something I should complain about, all good to me. Go down to another details of lettering :

Well, i don't know about you guys, but i am happy with the font style and size. They looks perfect i guess. Let's see overall front picture of this GMF Breitling :

Yellow inner bezel is match with geunine, and every parts on the dial are very neat and well replicated. 

Crown details is good, I feel a bit rough when I turn the crown, but it's nothing to do with that. Anyway, crown logo is very nice. Green lume as genuine, very sensitive towards light source.

I feel better with GMF rubber compare to other factory, the rubber is perfectly replicated, with super nice details, edge tappering is something that other factory didn't put the attention on, but GMF did. Buckle details is good, no issue. How about the caseback details?

I save this parts for last, because GMF have just done such a perfect details on the caseback parts. No mistakes on wording, super deep engravings (deeper compare other factory), and circular line on the center is nicely done. When i wear it, i feel very comfortable, there is no rough feels when I put it on the wrist.

At the end, i have to say that this is very nice build, and GMF have just made better replication compare to other factory before. When you want something as a gift for someone, this is your best option, nice perfect presentation from GMF

Here is the video

 

 

SEE MORE SUPEROCEAN ABYSS FROM GMF IN OUR WEBSITE HERE

 



by DTIME International on 26 April 2018

Hi guys, welcome back to our blog section...

Many of our customers ask about the real blue color of this watch, because they saw darker blue color on the product listing. The watch is Hublot Classic Fusion 42mm from JJ Factory. This factory known as the only good maker on making classic fusion replica. Again, I am not gonna talk and comment more on this topic, but giving more closer looks pictures of the piece. So you know exactly how good is the replica and how good is the color.

Sunburst blue dial is nice, super clean dial make this piece more elegance. Let's see closer looks of the dial details :

Super neat font, correct font style. Overall, perfect dial details. Date font is also good.

Crown logo is very neat with textured engravings. The scres well placed neatly on the brushed bezel. The lug screw is also very nice.

Titanium finished caseback is very nice. Super neat engravings. No issue.

Asian 2892 automatic movement at 28800 VPH with Hublot engravings. JJ Factory has made a very nice detials on movement decoration. All litle detail are there well placed on the movement. What i love about this is, i can't hear rotor noise even the case is quite thin on this model. Well done.

Gummy strap is a combination of crocodile leather on top of the rubber. The idea is to make the starp more sporty looks and comfortable on your wrist. I feel it great with no issue on this part. Strap never be my concern because i can easily replace with genuine strap or custom strap.

I will leave you to judge how good this piece is. My job is to show you detail pictures from closer looks. For me, this piece with the price is quite worthy.

GRAB THIS NICE BLUE PIECE FROM HUBLOT HERE



by DTIME International on 24 April 2018

Hi Guys, welcome back to our blog section....

After my disappointment with Noob for their promise of Submariner V8, now it's finally cured by a perfect works of very new factory called Great Master factory a.k.a GMF. They were just come from out of no where with something incredible, they build such a perfect Submariner 116610 LN and 116610 LV with 904L stainless steel material and SA.3135 movement, which is exactly the same as what Noob promised us with their V8.

I took the easiest option which is 116610LN (black ceramic bezel), and finally got a chance to take a closer look of that piece. First impression? the looks is just like ARF with plastic box as their presentation, but GMF put their own label on it. And when i firstly touch the piece, I was impressed and i was thinking that GMF is noob with other name, or maybe something close to Noob. I don't know what is going on there, but the build is very solid with perfect details on this GMF piece, as well as the GMF movement is better finished compare to Noob V7 SA3135 i guess. Anyway, let's have a look.

 

FACE COMPARISON

I took genuine picrtures from one of genuine site, clearly GMF is replicating 2014 up to early 2016 model with shorter "f" on the 1000 ft words, however they did a small mistake by putting "300 m" words too close to the "=". It should be a bit far as you can see on the right pictures. 

  • Dial details is well replicated, nice black dial color with totally correct size, fonts, shapes and dimension of hour markers, hands, logo, and dial lettering. I will say perfect on this part except the "300 m" too close from "="
  • Rolex logo on the dial have perfect shape and dimension, i found no issue on this
  • A little over zoom on the cyclops from what i see, but i am sure it's because of the camera angle on thaking those 2 different pictures.
  • Date font and dimension is correct with perfect shape of date frame.
  • I spot the rehaut is slightly better compare to other build on the same model.
  • Bezel markers color is very close to genuine, with perfect thickness and engravings depth. But to be honest, i still stay on ARF bezel color marker, they are doing a bit better.
  • Have no issue with ceramic bezel color anf finished, it is just simply perfect replication.

 

CASE AND BRACELET DETAILS

I can't see any different between those crown details on above picture. GMF crown logo is as perfect as genuine from the shape and dimension. No issue.

I raised this part because some noob build have issue on this part (SEL). The SEL of GMF is perfectly solid, there is no significant gap that potentially make some shaky when you shake the bracelet. They made it cool actually, but it is not something extra ordinary since ARF always making this part perfectly. 

GMF clasp is very good, the mechanisme is just works perfectly without any jammed or other issue. However the crown logo still not replicated properly, as well as other factoies with pretty much the same issue on this. I have no complain on the clasp engravings, they are just good as well as other factory like Noob, ARF or VRF. 

 

THE MOVEMENT

I am not going to talk 904L too much on this topic, because it is hard to tell by the pictures to talk about this. What i felt is very solid brushed steel and well done finished by GMF compare to other factories that make it with 316L. I ll go to the movement right away, because GMF also make this build with SA.3135 as well as noob V7. How good is GMF movement looks? let see over all pictures first : 

If you don't compare the looks with genuine calibre 3135 movement, you wont spot easily because i can see that GMF movement have better finished compare to noob V7 ( i will show you later on ). The engravings is very deep and neat, and there is serial number engraved on the edge of the movement which noob didn't have that details. Let's compare it with genuine calibre 3135 to see how good and how close this GMF 3135 movement to it :

  • The inner disk on GMF is more rough compare to genuine
  • The amount of the screws and the position is replicated properly, even though size is not all the same. Generally GMF screws is smaller compare to genuine.
  • Purple rubby on the outter disk below the rotor are not the same with genuine, too small on GMF. However, this is happen on SA.3135 noob as well.
  • 3135 fonts is different between GMF and genuine, and the position need to be lower to the edge of middle disk.
  • Rotor and outter disk below rotor finished is better compare to what noob have.

Again, replica is still replica, but i will say that GMF has made this movement better and very close looks to genuine especially when you don't put them side by side and do closer looks. Many of you might wondering is it better compare to noob ?, lets compare it :

  • As i mentioned before, the engravings of GMF is better compare to noob made.
  • Outter disk below rotor textured is better on GMF compare to noob.
  • engravings font is better on noob 3135 compare to GMF.

Let's compare other angle :

All structures are about the same (except the engravings depth and font style). The big things on GMF movement is on the serial number perfectly engraved on the edge of the movement, just like genuine.

 

WEIGHT, LUME & VIDEO

  • What a perfect weight made by GMF, genuine is between 158 - 160 grams, and GMF is 160 grams exactly. This is far better compare other build which is below 155 grams
  • I have no doubt about lume, GMF use super luminova with correct color and good bright.

That is for now. So far i conclude that GMF build is very nice and all the details are better compare to Noob V7, even though i don't know about noob V8 becuase noob keep delaying the production.. 

GRAB GMF SUBMARINER WITH 904L STAINLESS STEEL HERE

 



by DTIME International on 11 February 2018

Hi guys, welcome back to our blog section...

AR Factory (ARF) recently being center of attention of Rolex replica enthusiasts. Their build is extra ordinary perfect compare to other factories like Noob and JF. Their build is very detail and solid, also some of their build armed with 904L instead of 316L. After successful with some of flagship Rolex model like Submariner, Daytona, Datejust and Sea-Dweller anniversary, they now build another model which is Sea-Dweller Deepsea 116660 "D-BLUE". How good is this compare to previous maker Noob with V7?

As we know that ARF is very focus on physical perfection instead of movement, because they prefer to have reliable movement, not good looking movement. So, i will not compare the movement on this topic. Lets start !

 

OVERALL BUILD

When i touch this piece at the first time, It is very heavy and solid. Good looking piece and blue black gradation color is totally good. One of the strength of ARF is bezel marker details. The dimension, depth and color are better compare to its competitor Noob. You can see how good when you see it closer as pictures below :

I think without having genuine beside, you wont be easy to notice that it is replica. Totally perfect and very solid build from case, bezel, and bracelet. Let's compare some part with genuine, see how good it is.

 

GENUINE COMPARATION

As you can see, ARF is very detail on every single part. The crown logo and Rolex logo are perfectly replicated. There is no significant dimension, thickness and font style differences. The dial marker are exactly like genuine.

Go down a little bit, you will see another perfection on lettering and printing of dial details. Correct green color on DEEPSEA word, with 3D printing and all those letter are perfectly replicated from the size, style and thickness.

Crown is something that you must see and touch how good is the feeling and how good is the details. As you can see there are some minor differences on this parts, but i will not complain more since those are very minor. Great feeling when you touch the crown will be good impression. Now, let's start looking at this piece closer !

 

DIAL OVERVIEW

As I mention above, there are no major flaws on this parts. ARF made a perfect dial with perfect color and details. How good compare to noob? I will say both are almost equal, but I still see that ARF slightly better compare to noob on this part.

There is another detail on the other side of the rehaut. Those are replicated properly by ARF. Font size is perfect as well as the depth of the engravings. I can see those are very neat from every single side i look at it.

This is the strong point of ARF, every piece they build have such detail bezel marker. Font size and thickness are perfectly replicated exactly like genuine. Depth of the marker is good, and the color of the marker is exactly perfect like genuine. What noob have on V7 is too thin and the marker color is more into grey, while ARF made it brigh platinum color like how it should be on genuine.

LEC is there at 6 o'clock position. It is quite easy to spot by the camera, but my camera is not as good as pro camera, so the dot doesn't look so clear. On the other side, lumenous is a must on this piece. Correct color, and those are very sensitive towards light source.

 

DIMENSION OVERVIEW

I don't see any big flaws on this part. 44mm case diameter, 17.5mm thickness (include the crystal) and 210 grams of weight. Those details are perfectly match with genuine. 

 

CASEBACK, SEL, AND BRACELET

Very detail and neat, i can't feel sharp edges on the caseback teeth, and all caseback engravings are well crafted.

SEL is one of weaknesses of NOOB factory on some rolex model. You wont find this issue anymore on ARF made, those are very solid and 100% fitment to the lug. There is no shaky things happening on this part. 

Perfectly replicated. Very solid bracelet feel, nice brushed finished, and every detail are replicated properly by ARF. I found no issue at all on this part.

 

MOVEMENT OVERVIEW

This is what ARF different from other. I have to say this movement part is some unfortunate. They use A.2824 based movement with lack of 3135 decoration, while noob is keeping up to make closer movement to genuine 3135 with their SA.3135. However I  believe they have good reasons why they choose this movement instead :

  • A.2824 movement existed in the market since the beginning of movement replication in China. Known as very stable and accurate movement working with 28800vph. This is probably the reason why ARF use this movement instead of SA.3135 which known as super clone movement but there are some stability issue on some production batch. 
  • The movement is not displayed, I believe ARF leave it non decorated just because it is hidden behind the caseback anyway. Not a big deal.
  • When you have issue with your movement, A.2824 parts is there in the market easily, very interchangeable with any ETA movement available.

 

CONCLUSION

  • ARF has made the this piece almost flawless physically. 
  • If you looking for perfect physical details, you must go for ARF
  • If you want closer looks movement to genuine, you must go for Noob factory, but it wont be as reliable as regular movement as ARF use.

 

BUY THIS PERFECT BUILD FROM ARF HERE



by DTIME International on 20 January 2018

Hi guys, welcome to our blog section...

After I talked about all perfections of  Rolex Daytona 116520 build, made by AR Factory (ARF). Finally now i got the chance to do closer looks on another perfect daytona build from ARF ; Daytona Cosmograph 116500 Baselworld 2016. ARF now leading the market on some Rolexes ; Submariner, Daytona, dan Sea Dweller. So many customers bought those pieces from ARF. Not only becasue of the steel material are made by 904L materials (factory claims), but just because the build is so perfect and detail. 

There are some flaws from previous build of Daytona (made by noob and JF 7750) :

  • The case is too thick, because of they are using modified Asian 7750 chronograph movement. There is no way to be thin, all JF and noob have more than 14mm thickness
  • Movement reliablilty since they move the second subdial to 6 o'clock position. It will be lots more problematic, however, they fix this issue on the latest batch, but still some having unstable movement.
  • Small dial flaws : Minute hands a bit longer compare to genuine and font logo small difference.
  • General material issue of 316L instead of 904L.

Most of the guys said there is no way replica built from 904L, only rolex can make that. But I don't know why ARF who is just come to the market claimed that the material is made by 904L solid steel. I leave you to judge weather you want to believe or not, until you can proof it with proper test.

So, let's start talk about how good is ARF on this models

 

FIRST IMPRESSION : BUILD FINISH

Another great impresson is come from the material, I am not sure if it is 904L or 316L since i can not test it with proprer steel tester. These are the best things of this piece when you firstly looks and touch and feel :

  • Solid build : you will feel like you are holding the real piece, no cheapy things come up. 
  • Awesome finishes : you can see all the details are very neat, and the shine on the case and bracelet are perfectly nice. I can see that ARF did something extra ordinary on case and bracelet finishing. You will have genuine feeling when you touch this piece at the first time. Far from 904L material or not, i can see easily this piece is way better compare to other rolex replica build. From the way its shine, you can tell its different from other build
  • Thin case : I can spot easily how the case lots more thinner compare to any daytona replica available (except the one from JF with not working chronograph)

Anyway, let's start....

 

THE FACE

This is always be my first inspection on daytona, because some other factories have big issue on this part. Again, its not happening on ARF, they're just perfectly build this consistanly without major flaws. All fonts are correct, neat and perfect size. As well as the printing, ARF also made the crown logo perfectly and very consitant from every batch of productions. Very close to genuine. Lets see details part of the dial :

Did u spot some flaws? As far as I can see, there is no major flaws on the face part :

  • Bezel marker are very neat from what I can see, especially on "UNITS PER HOUR" that in fact, some previous build have neat issue on that part. All bezel marker are perfect !
  • Generally, all dial details are perfect, the hour marker, sub dial marker, sub dial detail, are perfect from what i can see. 
  • Ceramic bezel is perfectly polished with very deep and neat bezel engravings as you can see on some pictures below :

As you can see on above pictures, all bezel engravings are replicated correctly. Very deep, neat, and correct silver color. I have nothing to complain on this part. It is just perfect !

  • The LEC is there, however my camera is not that good to catch it, but it is existed
  • No doubt about the lume, all good with correct color, very sensitive towards light source, and very neat. 

 

 

THE CASE

No doubt about this, ARF case is well build and very solid. Every details are replicated correctly and properly :

  • The crown logo is nicely done with no issue
  • The gear teeth on every button of the case are nice, no rough feeling when you turn it.
  • And as usual, ARF have well done SEL. It's very solid, and 100% fit placement. You wont see or feel something shaky on the lug end when you shake it.

As you can see on above pictures, the crystal height is about 1 mm, and quite acceptable. Case thickness without the crystal is about 12mm and with crystal is 13mm. This is way better compae to many previous replica that can reach 15mm marks. Genuine daytona is 12.3mm. Well, good move i think...

 

THE BRACELET & CLASP

Can you see how the bracelet finished and shine? It's perfect !. The combo of polished and brushed on the bracelet is just simply well made, i have nothing to complain, and I am very happy with the quality of the bracelet

As i mention before, the sel on this build is just perfect. Very tight, no shaky things, even harder to pull the strap out. Need perfect tool to do that.

  • I will tell you something good about the clasp. The first feeling on opening and closing the clasp is extra ordinary, the mechanism is just perfect. This is something that I can not tell by picture, you can feel it youself.
  • From above pictures, you can see the clasp details from the front side. For me, this piece is extra ordinary neat. 
  • Nothing to say for the back side of the clasp, sand blasted as it suposed to be.

 

 

THE MOVEMENT & FEATURE

I am very exciting to talk about this part far from other perfection mentioned above. Because i was impressed by the looks of the movement, it is pefect for me. See some movement picture below :

 

  • Movement details is very impressive, all details are there perfectly well made by AR factory. I believe there must be some flaws, but i have to say this movement looks awesome. Armed with New Slim Asian Chronograph movement running seconds at 6 position; and decorationis platinum plated movement plate and rotor which are made according to the genuine movement. This movement will give the factory space to make the case thinner compare to 7750 previously used by other factory on the same model. 
  • Reliability i believe so, because they build this from scratch instead of modifying 7750 asian movement to make second sub dial on 6 o'clock position. What is the flaw of this movement? Very unfortunate, that this movement will not provide 100% working chronograph, the minute and hour counter will be fix and not working. Only stopwatch and seconds subdial are working well (you can see on the video).
  • How you see this? it is up to you, i think the factory have to choose, either make the chronogrpah 100% working well, or make the case thinner. I questioned my self, how often I use the chronograph in my daily life? I can say never. So with this fact, i will be happy enough to accept th flaws.

 

Lets see the video :

 

 

GRAB THIS PERFECT PIECE IN OUR WEBSITE HERE



by DTIME International on 08 January 2018

Hi guys, welcome back to our blog section

For almost 2 weeks, Rolex model by ARF are being on the top selling. Everybody love what they made, and in fact those are totally perfect. After some review on some ARF made, today I will go for one of the model for small wrist, or for women. Rolex Date Just 116234 36mm with 904L material. As we know that finding the best grade on women watches on replica is very hard, because most of replica factories are developing men's watches for some reasons. After I see and feel for the first time, I will say this is most probably the best women's watches on replica industry ever ! I have both silver and blue dial, and let's see how good they are !

 

THE PRESENTATION

As usual, ARF have this very nice box presentation as on all other models. Nothing to say more on this part, all good and nice

 

THE FACE / DIAL DETAILS

  • There is nothing to complain o this overal face parts. ARF made it perfectly from the material finishes and dial details. You can see the markers, the lettering, the dial finish, the date wheel. As simple as perfect !
  • Cyclops is perfectly magnifying 2.5x as genuine should be. Date font is correct, but slighly thicker on genuine.

Let's see it closer and compare it with genuine

All lettering on the dial is perfectly nead, I can't spot any rough things on the letter printing. As well as the details, ARF dialalso have nice finish with sunburst effect as how the gen should be.

  • I tried to take a really nice macro shot, even though it's hard, but I can make it as closer as the genuine picture of the dial (left). 
  • Rolex logo is superb, even the dimension, shape and thickness is exactly the same with genuine.
  • All lettering on above the pinion and below pinion are well made and well printed. Same fonts style, size and thickness. I believe you will have difficulty to spot the different even though they are side by side. 
  • The sunburst dial is there, but i just can't spot it on my camera, but you can see on other pictures to see that part.

 

 

THE LEC AND LUME

  • Perfect lume, correct color and very sensitive towards the light source
  • The LEC is very hard to spot, but its there. I need to do better shot to get better dot, but I will say that one is existed.

 

 

THE CASE AND BRACELET

  • The strong point of ARF is on material. They claimed that they use 904L material instead of 316L. However, no one make a proofs of that, but I will say it is very solid and better shine compare to 316L as other factory use.
  • The crown have no issue, nice feel when you turn, and have perfect logo embossed neatly.
  • Another strong point of ARF is that their Sel is totally solid, i can't see some major gap on the lug end, they are perfectly intact regardless you shake it harder.

I will say no issue on this one, ARF just made it perfectly.

 

 

THE MOVEMENT

Different from other models, ARF choose SA.3135 for this build instead of using regular movement like what they made on Submariner and deepsea series. I don't know why they do this, but with this superclone movement, it is just as perfect as genuine even if you open it. All 3135 details are replicated properly. 

 

THE DIMENSION

No issue at all. 36mm diameter, 12mm thickness, and 125gram of weight. Exactly the same with genuine.

 

 

CONCLUSION

  • I will say this is the best small wrist / women's watches in replica industry EVER
  • Almost flawless on details and very solid bracelet.
  • Exact movement, very close to genuine. I hope this is as stable as regular movement as they claimed.
  • Top recommendation for you who looking for small wrist replica watches, or even as a gift for you loves one. Finding the best women's watches is very hard on replica, but this one is superb !

 

 

GRAB THIS PERFECT PIECE OF REPLICA ONLY IN OUR WEBSITE HERE



by DTIME International on 06 January 2018

Hi guys, welcome back to our blog section...

Last week was probably the hardest time for me to get this Rolex replica from ARF, their production is very limited and the demand is very high. Until finally I got it last week and have opportunity to do review on this high flying replica since December 2017. This is Rolex Sea-Dweller 126600 50th Anniversary made by AR Factory (ARF). This factory has been succesfully beat Noob and JF on Rolex Daytona and Date-Just 36mm model. How good is this Sea-Dweller? Let's take a look.

Before I go further, I just want to share my first impression on this replica :

  • Very nice material finished, as ARF claimed that the material they used is 904L (No one can confirm if it is real 904L or just better steel finished). 
  • Very solid Sel and bracelet. As i felt, you will feel the same once you hold this replica at the first time. Very solid.
  • Luxury impression on the packaging.

 

 

DIAL, CROWN, AND BEZEL

Absolutely perfect dial made by ARF. All the details on the dial are perfectly made. Very clean, neat, and I found all the lettering are perfect. 

  • Rolex crown logo is very precised on this ARF made. Perfect dimension, perfecth shape.
  • Correct font style and size of "ROLEX" lettering, and there is no major flaws on this part. Even though you put genuine and ARF replica side by side, you wont find any easy spottable flaws on this part.

Embossed red SEA-DWELLER is perfectly replicated by ARF. From size, color, and font style. All other lettering are alos nice with no significant flaws on this.

Very perfect bezel details, there is no rough part made by ARF on this : 

  • The ceramic finished is very clean and shiny
  • Very deep bezel marker engravings
  • Correct silver color on bezel marker
  • Correct font style, size and thickness on bezel markers.
  • Perfect crown shape and perfect crown Rolex logo

  • Rehaut is very nice, you can see on Rolex crown logo in the rehaut part, very neat and engraved nicely.
  • Random serial number are well placed at the bottom part of the reahut. 
  • I believe that those engravings still not exactly like genuine on this part. But  I can say this is very minor flaws

  • Nice cyclops magnifying, 2.5X as it should be
  • Date font is also good. Correct font style, size and thickness. 
  • There are some minor rough printing on some date number, but I can really accept this, not a big deal.

  • The LEC is there, nice dot and easy to spot on specific angle and lighting.
  • The luminous is very sensitive towards light source. I probably try to put a good light for 1 minute, and the result is as you can see on above-right pictures. 
  • The blue color of the luminous is correct as genuine.

 

THE CASEBACK AND BRACELET

  • I still keep the plastic cover on, but i still can see that the shine of the bracele is excellent.
  • The sel is very solid. You can see there is no significant gap on the lug end. 

Look at the caseback engravings above. Extra ordinary clean, neat and well engraved

Again, keep in mind that i still keep the plastic on. I can see all the deails of the buckle and clasp are replicated properly by ARF. From crown logo, Rolex stamp at the back of the clasp, and Rolex crown logo on the extension link is well placed, and nicely engraved

 

THE DIMENSION

Perfectly correct. 43mm case diameter, 15mm thickness (include the crystal) and very heave build by 188 grams.

 

THE MOVEMENT

This is what ARF different from other. I have to say this movement part is some unfortunate. They use A.2824 based movement with lack of 3135 decoration, while noob and JF are keeping up to make closer movement to genuine 3135 with their SA.3135 and SH.3135. However I  believe they have good reasons why they choose this movement instead :

  • A.2824 movement existed in the market since the beginning of movement replication in China. Known as very stable and accurate movement working with 28800vph. This is probably the reason why ARF use this movement instead of SA.3135 which known as super clone movement but there are some stability issue on some production batch. 
  • The movement is not displayed, I believe ARF leave it non decorated just because it is hidden behind the caseback anyway. Not a big deal.
  • When you have issue with your movement, A.2824 parts is there in the market easily, very interchangeable with any ETA movement available.

 

 

CONCLUSION

  • If you really looking for physical perfection, there is no doubt to choose this ARF compare to other factories.
  • ARF is using 2824 to support this replica. The movement is very reliable and interchangeable ability once you have problem
  • Price equal to perfection. Very worthy to have with that price. 
  • I will say ARF is the best on this model compare 
  • Rare production, you need to grab it fast 

 

GRAB THIS PERFECT SEA-DWELLER REPLICA IN OUR WEBSITE HERE 



by DTIME International on 03 January 2018

Hi Guys, welcome back to our blog section....

Breitling Bandit is one of iconic piece by Breitling, there are many people looking for this model on replica, but they won't find the best grade so far in the market. Until G factory (GF) released the new E1338310/M534 Chronograph Bandit model in perfect grade of Replica. I will do quick review on this on some important parts to compare with genuine. Let's take a look !

 

DIAL AND BEZEL

I don't see any major flaws on this, the matte grey color on dial is almost perfect, even though GF replica slightly darker from certain angle when you look at it. Case and bezel dimension I don't think any big issue on that, except on the bezel marker engravings. GF need to be a bit deeper and neater on this part, but again, it is not a major flaws until you put them both side by side. Let's see another shot of the front parts on below picture :

As my additional comment, I saw the Breitling logo on GF is not sharp as genuine. Date font size and style is the same with genuine, but I noticed that some numbers are slightly thicker (you can see on "0" number of the date). From this angle, I can't spot major different dial color, It is just perfect from me.

Crystal reflection is very nice, created a blue effect from side angle view on GF made, exactly like genuine.

 

THE CASE

Perfect case and lug shape, perfect crown guard shape, perfect titanium brushed material, perfect crown placement. But the crown logo on replica is too thin, and all pattern and engravings on crown as well as the button aren't deep enough as genuine. 

Titanium brushed finishing is perfect as genuine. The case thickness and bezel height is nice as well. But I spot something thick on the caseback cover as all replica pretty much have the same issue on this part.

Quite noticeable on this part. The engravings details have no issue, all letters and character are replicated nicely, but the depth of engravings is not as deep as genuine. You can spot easily that GF have light engravings on the caseback. I provide you another shot on this part :

 

 

THE STRAP

Not a big deal on this part. Military rubber straps is perfectly replicated by GF. The grey canvas color and all straps and clasp details are exactly like genuine.

 

THE MOVEMENT

Very noticeable rotor difference. You can see the center of the rotor on GF is very different compare to genuine. There is also mistakes on the rotor engravings, not on Breitling engravings but below it. The font style on genuine is cursive writing, while GF is normal font style. I am quite happy with the movement details besides the rotor. With 7750 based movement, GF made a good decoration to replicate the calibre. 

 

CONCLUSION

  • There is no flawless replica, but this Breitling model made by GF is the best replica in the market so far compare to other factories on making the same model. 
  • Since this model consider as iconic piece, I will recommend you to have this as one of your Breitling collection. 

 

BUY THIS PERFECT PIECE ONLY IN OUR WEBSITE HERE

 



by DTIME International on 01 January 2018

Hi guys, welcome back to our blog section...

This is my first topic in 2018. Exactly after new year eve, i was thinking about what is the different between V2 and previous version of Omega Seamaster Planet Ocean 600m 45mm Chronograph made by OM Facotry (OMF). Most of the people keep asking what makes them different?. Based on my research, OMF V2 on SMPO Chronograph have no significant differences compare to their first version, but on this version, OMF made some improvement on case and bezel finished, dial details, bracelet finished, bracelet details, movement decoration details, and its stability as well. 

Let's take a look closer !

 

THE FACE / DIAL

Here is some improvements on V2 (bezel and dial perspective) :

  • Bezel markers are slimmer compare to previous version, also very neat on V2
  • All lettering on the dial are perfectly well made on this version. Every letter on the dial are very neat with no rough printing
  • The logo dimension is very nice on this version
  • The date is now perfectly centered while the previous version have some alignment issue on some of the productions.
  • ZrO2 printing below the pinion on the dial is better on this version

The only thing that OMF forgot to improve is orange bezel color, still the same issue, very rough coloring.

 

 

THE CASE AND CROWN

  • The bezel teeth is way better compare to previous version
  • As well as the crown and He button embossed with perfect logo.
  • The case brush finished is very nice on this version. The combination between brushed and polished are perfectly replicated

  • At the back of the lug, there are some engravings. On this version OMF really improved to make them engraved neatly.
  • Perfect sel is another point to improve. And OMF just make it better. The sel are very tight to the lug-end. There is no shaky thing when you shake the bracelet.

 

 

THE BRACELET AND CLASP

  • Again, the stainless steel brushed finished on this version is better.
  • The bracelet material is very solid, there is no gap between the link that make the bracelet looks cheap. OMF really improved on this part.
  • The clasp detail. As you can see the logo engraved properly, and all detail letter at the back of the clasp are well made

 

 

THE MOVEMENT

  • Here is what OMF claim really improving. The movement decoration now is better and very close to genuine Co-Axial 9900. As you can see on above pictures, all the decorarion are looks perfect, and all the letter on the movement and the caseback are engraved properly, there is none of rough thing on that. 
  • Far from the looks, OMF claimed that this version is more reliable. As you know, OMF is the first omega builder that successfully made independent hands featur on 1 single sub dial. Minute and hour counter are working accurately and independently. However, there are some reliability issue on the first version (some of them), therefore OMF make improvements on movement side, not only perfect and better looks, but they make the movement very stable now.

 

 

CONCLUSION

  • You will have no other option to choose V2, because their V1 is no longer in production line
  • All details are perfect, the case and bracelet are well finished
  • Movement stability is the most important part.

 

GRAB THIS SMPO CHRONOGRAPH BY OMF V2 ONLY IN OUR WEBSITE HERE

 

 



by DTIME International on 31 December 2017

Hi guys, welcome back to our blog section...

We have done talking about submariner and submariner. We need to see other extra ordinary build of Rolex replica. One of them is Explorer I 214270 from J Factory with SH 3132 movement. I always have magic rules on replica perfection. The more simple the features, the better build on replica. I believe this is happen on this explorer model, because there is no date, there is no chronograph features which potentially make more flaws on replica if those are existed. Another important point is on the movement As we know that this explorer have no date feature, but on previous replica is using 2836 movement which have date setting slot. As a result, there is 1 crown setting position caused nothing (should be date) on this no date watch. And finally JF build SH 3132 movement to correct this flaws, and the result is perfect. 

Let's start see this model in details :

 

THE DIAL

The more simple, the better. That is why this replica looks extra ordinary good exactly like genuine. You can see on above pictures, that all the dial details are perfectly repliacted like genuine should be. Even though you put them side by side, you won't be easy to spot any major differences between those 2. Let's see them more details :

  • The marker are perfectly replicated. The shape, dimension, and the size are exactly like genuine. 
  • Rolex logo and font on JF replica is excellent. There is no noticeable flaws that you can see easily on this part.
  • The marker on replica looks thinner, but I am sure this is because of the darker frame (caused by light issue) on replica. If so, its not a big deal.

Until you go down, you will see 1 spotable flaws on "EXPLORER" printing. Replica need to have thicker font, as you can see that there is gap between words on EXPLORER while on genuine is very packed. This is happen on another printing : SWISS MADE, and SUPERLATIVE CHRONOMETER OFFICIALLY CERTIFIED, those are need thicker a little bit. I am not gonna complain about it since Rolex genuine have many differences of dial detail on different year of production.

LEC is there as you can see on the first picture above. The rehaut engravings is quite OK, but a bit rough as usually replica have this same issue. Those are very acceptable still.

Perfect luminous on JF, same color production, and very sensitive towards the light source. 

I have no isse on seeing the crown part. The logo is well embossed, and none of crown & logo dimension differences between JF made and genuine. 

 

SEL AND CLASP

The sel is very tight, there is no gap as you can see on above picture. And when you shake the bracelet, there is no movement on the end link, which mean JF have perfect sel.

Nice clasp finished compare to genuine. Rolex logo on JF is nice, but the hole on the logo need to be wider, and the position is too low. I wont complain, there is none of 100% replica, and i still remark JF build is very good on this, as well as other clasp part :

 

 

THE MOVEMENT

This is the best part on JF Explorer I replica. They use Shanghai movement SH 3132 which is very reliable, and the looks are the best. As well as the looks, since they build it from scratch, there is no date gap as you can find on other replica with different movement. JF just know how to present this replica in better way.

All of genuine 3132 details are replicated properly. Rough engravings is normal issue on replica, but i will say the movement looks of JF SH3132 is extra ordinary close to genuine. 

 

THE DIMENSION

No issue, 39mm exactly like genuine, 11.5mm thicknes exactly like genuine, and 136 grams of weight. I believer there is slight weight differences compare to genuine since the stainless steel material on genuine is 904L and replica is 316L. But its not far for sure.

 

CONCLUSION

  • Very recommended replica, almost flawless build.
  • The more simple the watch feature, the better on replica would be. This is happen on this model.
  • Very solid build on sell and bracelet, you want feel cheapy things goingon when you touch the bracelet. 
  • Perfect movement and stable by using SH instead of SA.

 

BUY THIS PERFECT REPLICA FROM JF IN OUR SITE HERE



by DTIME International on 31 December 2017

Hi Guys, Welcome back to our blog section....

I am preparing for my New year eve 2018 celebration, but fortunately I still have spare time to make a quick review regarding these Rolex Daytona Vintage Paul Newman series. I want to share how good the replica of this models made by replica factories. The reason why I do this mostly because I love these vintage series, those are very iconic timepieces. In fact, after market genuine Paul newman series is beyond the jokes, very expensive. 

I have 4 of them on hand, those are on modification progress to become a real vintage. Those pieces are : 6239, 6240, and 6263 (black and RCO dial). Here are some points as my first impression of these models :

  • The case is quite nice, but need to re-shape some sharp edges on the lug-end. 
  • The dial is too clean, since these models are from around 1969, it is needed to be real vintage
  • The case obviously no scratch, and I need to make some natural scratches to get vintage looks
  • The bracelet is not good, the gap between end link and the first link is too wide. The bracelet feels cheap, really not recommend to have. You better swap with better bracelet, or customs vintage straps.
  • The movement is quite good by using Seagull ST.19 active chronograph. You need to be careful to pick these models, because there are some factories build it with automatic with rotor, instead of manual winding. And the chronograph is not working 100% (Sub dial 6 o'clock always following the hour hands movement). With ST.19, it is perfect, all the chronograph are working as it should be. Eventhough the power reserve is not really good, but those are the best grade among others available in the market.

Lets start see them closely 

 

THE CASE AND DIAL

The dial details from those 3 models above are quite impressive. The sub dial texture are very details, the logo and all markers and printng are well made, very neat. The only thing that you need to concern is that you need to make these more vintage looks, because those are old (1969), should be patinated and some scrathces on the dial. What people usually do is modify the dial to be patinated and vintagized by the watch smith (modder). But if you like clean watches, those are the best already.

 For that price range, I think these build is quite details, they put all necessary details as they should be. The crown logo is nice embossed, and the case serial, and caseback serial. I believe they are not very close to genuine, but I will say fine with what they make.

 

THE DIMENSION AND WEIGHT

The thickness include the plexi dome is 15.2 mm, very acceptable as the gen is around 15mm as well. I am not sure about the weight, but I am sure it will be very close as approximate weight of genuine is 110 grams. The case diameter is 37mm exactly.

 

THE BRACELET

Don't get me wrong, the looks is very nice. But as I said before, that the material of the bracelet is bad. You will feel cheap while you hold it. The gap between the end-link and the first link is too wide. I won't recommend to keep the bracelet. You better swap it with better bracelet or else, you can try what I did with vintage customized strap as below picture :

 

 

THE MOVEMENT

Those I got are with Seagull movement ST.19 active chronograph. The looks is very nice as you can see, and those are very details build. Let's see it closer :

Fully manual wind movement, with superb nice details on movement structure and engravings. Some people stay with this movement, but some people change with genuine valjoux 23 even the price is very expensive due to the fact that this ST 19 doesn't have very good power reserve. Most probably only 36 hours after full wind.

Be careful on choosing these daytona vintage series, because there are some factory build these model with bad movement (automatic) like this :

With that movement, the chronograph is not working 100%. The sub dial at 6 o'clock will always following the hour hand. Not running independently. You can see the movement different as below picture :

From the build and feature, those 2 movements are totally different. So you need to careful on choosing these vintage models, especially on movement.

 

THE VIDEO

 

 

CONCLUSION

  • Overall its not bad to have factory made, as long as you can accept some flaws I mention. For the price range of $300, those are price worthy. 
  • If you want to modify the looks to be more vintage with correct shape, dial details etc. You can modify with us. See some of our build HERE
  • The bracelet is not good, you can change with better bracelet, or you can also create customs straps as listed HERE
  • The movement is quite ok, but if you need to replace with better one, you can contact us on email

 

GRAB THESE DAYTONA PAUL NEWMAN SERIES IN OUR WEBSITE HERE

 

Happy New Year 2018.....



by DTIME International on 29 December 2017

Hi Guys, welcome to our blog section...

Rolex Yacht Master Everose 116655 is one of high flying replica on Rolex series. There are some factories building this model and competing each other ; JF and noob obviously. However, there is new factory come up with the same idea of replica builing, named as V9 Factory (V9F). This factory is quite smart actually, instead of replicating old production year of 116655, they replicate 2017 model of 116655. Therefore, the rubber straps (which has been size issue on noob and JF) is replicating new model with extended rubber link. Easier to adjust instead of giving 2 sizes of rubber straps. That is the idea of the gen in 2017 production. Lets see how good and how close this V9F build on this model 

  • From this side, i can see the 3D bezel detail is quite good compare to other factories as competitor. Those are well neat, with no font and height issue. 
  • Crown size is about the same with genuine, even if i still can see that the crown teeth on V9F have slightly wider surface compare to gen
  • Crown guard shape is a little bit different between V6F and genuine, I think V9F need to be more curvy to replicate the gen. 

 

Even though you put them side by side between genuine and V6F replica. I believe you wont find spot the differences easily. Which means, V9F is quite good on replicating this model.

  • Need to be sharp of crown logo on V9F. However, the 3 dots are correctly build. The middle dot is bigger to the others, while on noob made are same size.  
  • If you look at the crown guard surface carefully, you will spot that V9F is slightly wider

Very detail on this part, good reference number engraved, very deep and neat compare to other factories. You can spot a slight shape difference on the ref number plate, but it's not a big deal.

 

I guess V9F have better engravings details compare to other factories available. As you can see, all the engravings are perfectly build, very neat and deep. Even the crown logo engraved on the back of the lug is very neat. I didn't see case dimension issue on V9F, all good.

 

As i mention above, V9F is focusing on stamp, engravings, and small parts details. As you can see on picture above, those are well build and very neat.

 

This is major advantage of V9F. They build exactly the same 2017 rubber strap style of this model. The different between old style and 2017 style is on the extended rubber link intact to the straps. 2017 style have ability to adjust to fit to some particular wrist size while the old style is fixed and giving 2 differen rubber sizes instead. With this style, will give you more flexibility on adjusting the strap fit to your wrist.

Overall, i can say V9F is very good on detail engravings, embossed, and any small parts detail to make perfect replication. How about the movement?. V9F prefer to stay with stable movement 2836 instead of using SA.3135 just like other factories. They are exactly know that physical build is the most important part since the caseback is not displayed on any rolex model. 

DECIDE YOURSELF, THIS IS WORTH TO BUY. BUY NOW IN OUR WEBSITE HERE



by DTIME International on 05 December 2017

Hi guys, welcome back to our blog section....

Speaking about Rolex Submariner, a lot of confusions going on replica industry because many major factories are keeping up to build the same model with different point of perfection. Noob factory is definetely on the top list so far with V7 build, but last month there is new factory come up with some good start of making some rolex models, named AR Factory (ARF). Some folks said that this is actually JF with another branding name, but i don't want to talk about it now.

There are line up made by ARF : Daytona, Datejust 36mm, Sea-Dweller and Submariner. I wrote my review before on their daytona model with good result of judgement. But now after long research, i finally dare to speak about how their Submariner 116610LN build compare to other factories. Let's start....

 

CASE, DIAL, AND BEZEL

Let's talk about overall view of the case, dial and bezel :

  • The whole build of the case and bezel are very nice. Perfecly shiny and states a solid looks of the build.
  • It is very clear that ARF took the sample of 2010-2015 submariner model. You can see the "M" on submariner is thinner, the "f" on ft is short, and the "0" is oval instead of round. These aren't flaws, because they replicated the sub from 2015 productions or before. 
  • Overall ceramic finised is very nice, also the bezel markers are perfecly nice.
  • The teeth are nicely done with a good brushing pattern.
  • Crown as good as what noob have. No issue
  • Overall dial finished? I still keep noob v7 dial details as the winner compare to this one.

 

Speaking about dial, I tried to take a closer looks. Here are some points to consider

  • As i mention before, ARF replicating 116610LN 2010-2015 submariner model. You can see the "M" on submariner is thinner, the "f" on ft is short, and the "0" is oval instead of round. These aren't flaws, because they replicated the sub from 2015 productions or before. On the other side, noob V7 are replicating 2016-2017 production of submariner.
  • I don't have so much issue on the printing, the font style are the same, with good and neat printing. But still i will say noob is better on this part, no doubt.
  • LEC is the same with noob, you can see it on specific angle on crystal near 6 o'clock position
  • Crystal height is perfect, no issue
  • Lume have no issue, perfectly the same with genuine.

 

  • I will say that ceramic bezel is very nice, perfect shine as how it should be on genuine. 
  • Bezel markers are perfectly made, not too wide, nice depth, and correct silver color. For some reason i love this ARF on this side compare to what noob have done.
  • Pearl is there in a perfect shape and position, it is just correct as it should be on genuine.

 

  • Cyclops pretty much the same with what noob have. But i think ARF produce more clear view on the cyclops compare to noob
  • Date font style are correct as genuine, thickness is right, but need to be more neat. There is a flaw i believe, but hard to spot until you put this head to head with genuine.

 

SEL & BRACELET

This part is probably what makes ARF being the best build on submariner model compare to other factories. Noob is good on dial details, however they are not good on bracelet and sel perfections, always be a flaws. But with ARF, the sel is perfectly fit with no gap at all, you will feel it solid when you shake or wear it. See the sel fitment on below pictures :

I will say that ARF bracelet and sel is the best among other submariner build available in the market. Very solid feel, and there is no gap issue between those link. Those are just perfect and solid.

 

CASEBACK & MOVEMENT

This is what ARF different from other. I have to say this movement part is some unfortunate. They use A.2824 based movement with lack of 3135 decoration, while noob and JF are keeping up to make closer movement to genuine 3135 with their SA.3135 and SH.3135. However I  believe they have good reasons why they choose this movement instead :

  • A.2824 movement existed in the market since the beginning of movement replication in China. Known as very stable and accurate movement working with 28800vph. This is probably the reason why ARF use this movement instead of SA.3135 which known as super clone movement but there are some stability issue on some production batch. 
  • The movement is not displayed, I believe ARF leave it non decorated just because it is hidden behind the caseback anyway. Not a big deal.
  • When you have issue with your movement, A.2824 parts is there in the market easily, very interchangeable with any ETA movement available.

 

DIMENSION, WEIGHT & THICKNESS

I don't think there is major different on dimension, thickness and weight compare to genuine :

  • Case diameter 40.5mm same with genuine
  • Thickness of ARF made is thinner compare to noob. Noob 13mm, ARF 12.5mm. Genuine is about 12.7mm to 12.8mm. You can judge on this one.
  • Weight is very close to genuine 155grams.

 

CONCLUSION

  • If you looking for the best material and solid build especially on bracelet, we recommend you to get this model made by AR factory (ARF)
  • If you looking for closer looks on movement, you must choose the one made by NOOB factory. Now they are on V7 version after some development since the beginning of time they're making this model.
  • Read Rolex replica guide HERE

 

CUSTOMER FEEDBACK

 

BUY THIS PERFECT REPLICA BY ARF HERE



by DTIME International on 04 December 2017

Hi guys, welcome back to our blog section....

Finally i have a chance to make this topic after long waiting of some factory could make this 116610LV a.k.a Hulk closely to genuine. We know that Noob has been working on it until theri V7 come up, but again, the green bezel color always be a flaw. It is very hard to make it closer green ceramic color to genuine, because they must be created from specific material with specific making technology. 

Finally end of 2017 is the best time for one new factory named VR Factory to release some high quality Rolex replica to the market and thanks for them for putting 116610LV hulk as one of their products along with 16610LN (wait for next review) and Sea Dweller 50th anniversary. VR factory claimed that their 116610LV are made with specific green ceramic material with specific technology of makin, the result they claim to be the closer bezel color compare to other existed factories.

Well, let see it head to head with genuine.

 

BEZEL COLOR & DETAILS

It is very hard to tell what kind of green color is that. And i believe there is still slight difference between the green color of VRF made compare to gen. Every angle will produced different color looks. In this angle, i still can see that the green color is better compare to what noob and JF made before, but still need to be a little bit brighter. At this point, i will say that the green color of VRF made is the best among other production from other factories. 

Lets see from another angle. Well, I can say very close color to genuine. Even i will say 98% same color production with genuine. Far from the bezel color, VR Factory make perfect bezel marker with correct silver color. When you see it closer, those marker are well neat. However i still can spot that the marker is a little bit too thick compare to genuie, as you can see on below pictures :

Lets move to other parts

 

CASE AND BRACELET DETAILS

VRF really learn from previous factory making this 116610LV models. The case thickness is perfectly the same with genuine, the crystal height is just perfect as genuine. And the when I touch the bracelet, they have very solid bracelet with perfect clasp details. I can say nothing i can complain on this part. 

Crown guard shape is nicely done. However i still can see that the crown gear need to be sharpen. 

This is not a complete review, only some overview that I take from China forum listed by VR factory. I will do deep review after I have it in my hand soon. One thing I can say, this is probably the closest green bezel color on replica ever. 

 

IF YOU LOVE THIS "HULK", YOU MUST GO FOR VR FACTORY MADE HERE

 



by DTIME International on 25 November 2017

Hi guys, welcome back to our blog section....

This topic is Part 2, after giving you guys recommendation on Rolex brand before. Today i will give you some facts and recommendations on other high flying replica , AUDEMARS PIGUET. 

 

This most probably number 2 demandable brand on replica industry. Basic question "I love Audemars Piguet, and i want to buy good replica, which models i have to choose? and from what factory?". All i can say on this brand is very straight forward. The best replica build for this brand is J Factory. You can't go to other factory. My fair judgement, experience, and customer feedback are telling the same result. JF rules this brand on replica industry.

However, we have to tell that not every AP models made by JF are the best. Which means there are some models with good perfection, there are some models with some flaws. As seller, we have to clearly guide you before you decide to buy. We will devide the recommendation by refference / model, here we go :

ROYAL OAK

We put this model at the first place, because currently we inspect that this model is most probably the closest replica compare to all AP models. J Factory always rule the market on AP replica, include this model. However, there are some factory like AJ factory and some other small factories. 

15400 SERIES (41MM)

We can not go wrong on this. When you looking for Royal Oak model, these are the best among other Royal Oak, or even among other AP replica. JF just released the newest version (V2J) with some significant correction compare to previous version :

  • Dial color and pattern on the new version is better
  • Thickness on new version is very close to genuine (10.5mm)
  • Brushed finished on the case and bracelet is better
  • Very solid bracelet
  • The quality of the leather strap (on leather version) is the best among AP replica leather strap

Beside all those perfections, there are some notes

  • The gold is only plated, not thick wrapped gold like what noob did on some of their models. However, it is very acceptable because if JF make it with thick gold, it will cost them fortune.
  • I was wondering if the movement are using A.2824 instead of Miyota 24J. However we finally understand why they use Miyota, because only Miyota movement can support thinner case.

Click HERE if you want to see the newest version of 15400 series from J Factory. Any other recommendation for Royal Oak model? I will list them below :

  • 15450 SERIES (37MM) : These are also good, however we oftenly found sharp things on the case and bracelet. See these models HERE
  • 67651 SERIES (33MM) : Good for lady. Nice build and very solid. However, if you don't like quartz movement, you can't go for these model. Nothing wrong, since the genuine are using Quartz movement as well, it is a matter of taste. See these models HERE
  • 26574 SERIES (41MM) : These are very nice complex watches. JF successfully made all the features 100% works well. The concequency is the case is too thick. Remember the rules, the more complex the watch, the more unstable the movement would be in the future. See these models HERE

 

ROYAL OAK OFFSHORE DIVER

15703 series probably the longest AP diver replica being on the top list since the beginning of replica industry. So many people aware that this replication is almost perfect time to time. Recently is V7 version in the market for this model by J Factory. Keeping up on the game is the newer model on diver series 2014, 15710 series. JF now already on V8 for this model Here are some differences between 15703 and 15710 :

  • The case back on 15710 is open case. We can see the movement from the back. 15703 have solid closed caseback.
  • JF use Miyota 28800vph on 15703 series, while 15710 are using Miyota 21600vph

Which one I have to choose between those 2 diver model?. I will recommend to buy 15703 because :

  • The case are not transparent, so the movement flaws will not gonna be noticeable.
  • Using A.2824 movement with 28800 vph, very smooth swapping seconds hand.

Any flaws on those models? Of course yes, there is no 100% replica, but we will say these models are very close to genuine. Here are some minor flaws :

  • Date font is too small on replica
  • The case slightly thicker on replica
  • The movement decoration (15710) will have noticeable flaws if you see it closely.

If you want to see 15703 V7 model from JF, click HERE. If you want to see 15710 V8 model from JF, click HERE

  • 15710 have so many varians, you can choose one of them HERE
  • 26703 DIVER Chronograph : Choose the one from JF, not Noob. See the list HERE

 

ROYAL OAK OFFSHORE (42MM)

Again, JF rules the market on these model as well, while Noob try co compete, but i will say JF is the best choice to go. There are some concern before you choose the model besides the whole build perfections :

  • The seconds sub dial located at 12 o'clock postion. The factory must try so hard to modify Asian 7750 movement to put the second sub dial on 12 o'clock postion instead of 9 postion as the movement default. This modification caused some weakness on the movement. The movement will not gonna be as long lasting as regular movement such as A.2824 or miyota. 
  • The character of 7750 with decoration is thick movement, so you must accept slight thicker case if you want these models.

There are common dial issue on these models :

  • Cyclops is not magnifying exactly as genuine, therefore the font looks smaller compare to genuine
  • Datewheel edge color on replica is white, instead of Black on genuine
  • Font type and size is smaller on replica compare to genuine
  • Gap between datewheel and tachymeter ring is very tight on replica, while in genuine there is significant gap between
  • Bezel screw on replica is too flat on the edge. While the genuine on this model is rounded on screw edge. Also need be repolished to catch the shine of white gold on genuine
  • Hand pinion is too big on replica
  • Modified A.7750 causing the case become thicker like picture below

Those flaws will always be there on every Royal Oak Offshore chronograph replica. Quite acceptable, and we have to say that JF is the best one on building this models compare to Noob. Some people do some modification to make it very close to genuine. You can see some modifcation that people usually do 

  • Light modification (without changing the movement), the case will remain thicker). Read more HERE
  • Heavy modification (change the movement to genuine), the case will be thinner, but the cost is killing. Read more HERE

Bottom line, JF still the best factory on making ROO 42mm series. You can see complete list of Royal Oak Offshore chronograph models HERE

 

ROYAL OAK OFFSHORE (44MM)

If you love these models, you don't have any other choice, only JF making these models better. We don't think Noob making some of this models. The price is quite expensive, but the build are mostly perfect. There is no such issue as on 42mm series, but not every people love 44mm due to the size. If you have big wrist, these models from AP will be your best option.

But remember :

  • The seconds sub dial located at 12 o'clock postion. The factory must try so hard to modify Asian 7750 movement to put the second sub dial on 12 o'clock postion instead of 9 postion as the movement default. This modification caused some weakness on the movement. The movement will not gonna be as long lasting as regular movement such as A.2824 or miyota. 
  • The character of 7750 with decoration is thick movement, so you must accept slight thicker case if you want these models.

See all ROO 44mm models from J Factory HERE

We hope this topic will help you to choose the best AUDEMARS PIGUET replica among existed in the market. We do this based on our research and some customer feedback. 

KEEP FOLLOWING THIS TOPIC, WE WILL GO FOR THE NEXT BRANDS AFTER ROLEX & AUDEMARS PIGUET...



by DTIME International on 08 September 2017

Hi guys, welcome to our blog section...

Finally i have chance to try and do closer look of the newest Rolex Daytona 116520 build, made by AR Factory (ARF). This is probably the first rolex replica with 904L material. Well to be honest I have no idea how to test, but hopefully i can find something from outside. Let's see how good this piece is

There are some flaws from previous build of Daytona (made by noob and JF 7750) :

  • The case is too thick, because of they are using modified Asian 7750 chronograph movement. There is no way to be thin, all JF and noob have more than 14mm thickness
  • Movement reliablilty since they move the second subdial to 6 o'clock position. It will be lots more problematic, however, they fix this issue on the latest batch, but still some having unstable movement.
  • Small dial flaws : Minute hands a bit longer compare to genuine and font logo small difference.
  • General material issue of 316L instead of 904L.

Most of the guys said there is no way replica built from 904L, only rolex can make that. But I don't know why ARF who is just come to the market claimed that the material is made by 904L solid steel. I leave you to judge weather you want to believe or not, until you can proof it with proper test.

So, let's start talk about how good ARF build is.

 

FIRST IMPRESSION : PACKAGING

Quite impressive, when no factory giving you special case, ARF gives you special packaging by default. They put "fake" store there too. Not a big deal, but I can see ARF want to make this piece special to gain special market.

 

FIRST IMPRESSION : BUILD FINISH

Another great impresson is come from the material, I am not sure if it is 904L or 316L since i can not test it with proprer steel tester. These are the best things of this piece when you firstly looks and touch and feel :

  • Solid build : you will feel like you are holding the real piece, no cheapy things come up. 
  • Awesome finishes : you can see all the details are very neat, and the shine on the case and bracelet are perfectly nice. I can see that ARF did something extra ordinary on case and bracelet finishing. You will have genuine feeling when you touch this piece at the first time. Far from 904L material or not, i can see easily this piece is way better compare to other rolex replica build. From the way its shine, you can tell its different from other build
  • Thin case : I can spot easily how the case lots more thinner compare to any daytona replica available (except the one from JF with not working chronograph)

Anyway, let's start....

 

THE FACE

Did u spot some flaws? As far as I can see, there is no major flaws on the face part :

Bezel marker are very neat from what I can see, especially on "UNITS PER HOUR" that in fact, some previous build have neat issue on that part. All bezel marker are perfect !

Perfect sel. You can see the end link of the strap is perfect. There is no gap and you wont find shaky on this part. Very solid

Generally, all dial details are perfect, the hour marker, sub dial marker, sub dial detail, are perfect from what i can see. Except 2 small flaws that i can tell on this part, see below picture :

Nothing you can find if you don't put this replica side by side with genuine, but i can see some small flaws :

  • ROLEX font logo need to be wider, you can see easily form "O" on replica is too perfect circly, while on the gen is more into oval.
  • Crown is nice on replica, however, you can see that it's should be more 3D not plain.
  • The minute hands on replica is a little bit too long, it should be below marker a bit
  • But again, you can only tell these when you put genunie and this replica side by side. If not, i don't think you will notice. Lets see the reahut and LEC now :

This is another small flaws i think, the rehaut engravings need to be more shallow on this part. But, i won't complain since this is something that you can not see clearly without having good angle and detail inspection.

LEC is there, you can see it clearly the logo on the top of 6 o'clock marker. Lets move to other part

Blueish lume is nice, and i dont think its something you can complain about. 

 

THE CASE

As you can see on above pictures, the crystal height is about 1 mm, and quite acceptable. Case thickness without the crystal is about 12mm and with crystal is 13mm. This is way better compae to many previous replica that can reach 15mm marks. Genuine daytona is 12.3mm. Well, good move i think...

  • Crown and pusher is very details, all well made, well finished. I don't see size issue, and there is no sharp edges when you touch and operate the crown and pusher.
  • The shape of the case is nice and there is no sharp edges that you will find on this build, simply perfect.
  • I have no issue with the case from the side or the back. The brush on the back case is just like how it supposed to be on genuine. This 116520 model have brush caseback instead of polish

 

THE BRACELET & CLASP

Can you see how the bracelet finished and shine? It's perfect !. The combo of polished and brushed on the bracelet is just simply well made, i have nothing to complain, and I am very happy with the quality of the bracelet

As i mention before, the sel on this build is just perfect. Very tight, no shaky things, even harder to pull the strap out. Need perfect tool to do that.

  • I will tell you something good about the clasp. The first feeling on opening and closing the clasp is extra ordinary, the mechanism is just perfect. This is something that I can not tell by picture, you can feel it youself.
  • From above pictures, you can see the clasp details from the front side. For me, this piece is extra ordinary neat. 
  • Nothing to say for the back side of the clasp, sand blasted as it suposed to be.

 

Will you complain? I wont... it is just perfect details on this part.

 

THE MOVEMENT & FEATURE

I am very exciting to talk about this part far from other perfection mentioned above. Because i was impressed by the looks of the movement, it is pefect for me. See some movement picture below :

Movement details is very impressive, all details are there perfectly well made by AR factory. I believe there must be some flaws, but i have to say this movement looks awesome. Armed with New Slim Asian Chronograph movement running seconds at 6 position; and decorationis platinum plated movement plate and rotor which are made according to the genuine movement. This movement will give the factory space to make the case thinner compare to 7750 previously used by other factory on the same model. 

Reliability i believe so, because they build this from scratch instead of modifying 7750 asian movement to make second sub dial on 6 o'clock position. What is the flaw of this movement? Very unfortunate, that this movement will not provide 100% working chronograph, the minute and hour counter will be fix and not working. Only stopwatch and seconds subdial are working well (you can see on the video).

How you see this? it is up to you, i think the factory have to choose, either make the chronogrpah 100% working well, or make the case thinner. I questioned my self, how often I use the chronograph in my daily life? I can say never. So with this fact, i will be happy enough to accept th flaws.

 

Lets see the video :

 

 

GRAB THIS PERFECT PIECE IN OUR WEBSITE HERE



by DTIME International on 24 August 2017

Hi guys, Welcome back to our blog section..

I have been waiting for this little pilot since I love this model but there is none of them are size friendly to my wrist. Finally Zenith released 40mm pilot type 20 model on Baselworld 2017. There are something different that I have been looking for far from the size, the color and also the case finish, aged steel with vintage accent. 

Now, i ll take you to see closer how good the replica of this model made by XF factory. I took the blue one because i love that color. 

THE FACE 

I love the texure of the dial, it is stated that this watch is something vintage in the modern era. All marker are perfectly intact which I think there is no major issue on the size and font style. All lettering are perfectly made by X factory. How about the blue color? I will say hard to tell since you will have different blue accent gradient when you take picture from different angle. A bit too bright but i am not gonna complain about this, it is just nice to see. Lets see on some other closer picture of the dial :

I am a little bit doubt about the color, but it is hard to tell because it might be comes from the camera or angle. But the rest of the dial details are perfectly done.

 

THE CASE & DIMENSION

As i told you before this is the most wrist friendly Type 20 pilot from Zenith, the case diameter is exactly 40mm, and the thickness is 12mm. I will say no different with genuine. 68 gram of weight (excluede the strap and buckle) is very acceptable since genuine stated as 70 gram.

And the most beautiful thing to be vintage on this model is on case finishing. Stainless steel with aged finish is the best way to state vintage look on modern watches. You can see clearly on the case detail that i am about to show you below :

The iconic crown is a must, and XF did really well on replicating this part, nice details and there is no sharp edges along the crown. Simply comfortable and strong build.

You can see scratches are along the case, and with darker finish, it makes the case looks really vintage. For you who love vintage looks this is probably the best choice among Zenith model. Now lets see the caseback details :

There none of single detail missing on this replica. The engravings are nicely done, very deep and smooth, there is no sharp feel when you wear this. Also all details are there perfectly neat. It is something that you can not complain. XF just made it perfect !

Nice lume, greenish just like the genuine supposed to be. Very sensitive of light and very bright.

 

THE MOVEMENT

Actually XF can leave this plain since the caseback are closed. No one can see inside the case unless open the case. Opening the case also not easy task, you need small nice screw driver to open it. However I can see that XF put another effort to make the movement looks close to genuine. The movement based is miyota but it is modified to be close to Elite 697 Calibre from zenith. The engravings on the rotor are nice, quite neat and the deco are there. Very nice details.

 

THE STRAP & BUCKLE

This parts is the one that i dont really like personally, but it is not a fair judgement since everybody have their own preferences. For me the strap is not too comfortable, too stiff a little bit. But don't get me wrong, the build is nice, the lining material and details also very nice. You can see the pictures below :

There is nothing to say more on the buckle, all details are right and details.  

Another things that i love from this model is very easy to replace the straps. The model itself is very easy to accept any kind of custom straps. I prefer to wear it with my custom straps just like below pictures :

Well this is up to you. Some of you might stay on default straps, it's simply your choices. Bottom line, XF really made this model perfectly with only little flaws. See it clearly on video below :

GRAB THIS PERFECT REPLICA FROM XF, ONLY IN OUR STORE HERE

 

 



by DTIME International on 12 July 2017

Hi guys, welcome back to our blog section...

I finally got a chance to make a closer look on one of the latest Bvlgari replica made by G Factory (GF) ; Bvlgari Diagono DG41C3SMCVD Magnesium Peek. The reasons why I do this is just because of the material on genuine is using something not common on watches which is magnesium & PEEK, also the dial material is using Motor-Lac with very nice texture. 

I choose blue dial as that color is quite well sell in our website compare to other dial color. Before I go too far, I ll show you the picture of genuine piece of this model since I don't have the genuine in my hand. And also to make you easier to do comparison.

Now we start talk about this replica more. Keep reading...

I am quite impressed since the first time i hold the replica of this models made by GF. Very solid, details and well finished. I think this is the most perfect bvlgari ever made by any replica factory. Let's see a closer look of this piece.

BEZEL AND DIAL

The Motor-Lac treatment gives the dial a reflective, granulated look that’s simply intriguing, but while it looks awesome in real life, it turns out to be very hard to capture accurately. However , as far as I can see, the blue is more into Aegean blue if you see on blue color guide on the internet. Every angle will give you different result of blue color produced. It is nice and I will say the color is very close to genuine color in some angle.

Let's have a look even closer :

There are some points from those above dial pictures :

  • The logo and "magnesium" font are correct, well printed, and neat, but need to be a bit thinner. This is not a big deal, since, those are very acceptable.
  • The hands and marker are well placed, i can not see major issue on that.
  • Datewheel position and size are correct.
  • Date font is correct, but need to be a little bit shorter
  • The bezel is made by ceramic, and as far as I can see, GF made it nicely include the deep and neat engravings. There is no such rough edge on that bezel details. Only 1 thing, the bezel need to be more brushed on finishing. 
  • Overall, i didn't see any major flaws on dial and bezel part.

 

THE CASE

The 41mm case features not one but four next-generation materials and treatments. The case middle is made from magnesium – an extremely light metal that also happens to be very tough, which makes it the perfect choice for the action-oriented Bulgari. The bezel is scratch-proof black ceramic, etched with the brand’s iconic text. The ceramic and magnesium alone would be enough for this watch to stand tall among the hi-tech sports watch crowd, but Bulgari have taken it to the next level. The sides of the case are made from PolyEtherEtherKetone – known by the cute acronym PEEK – which possesses the kind of temperature and structural resilience that has seen it used instead of metal on space shuttles. Clearly, it can deal with any damage you try and dish out. The final ingredient is Motor-Lac, a protective lacquer developed by the automotive industry that gives the Diagono its distinctive, colourful and shimmering sandblasted finish. 

  • The thickness is exactly 9.5mm from the edge of the crystal to the edge of the flat caseback. But when you measure the case itself, it's only 6.5mm thick
  • The crown have no logo, so I can not tell anything on this part. Bottom line, the thickness is exactly like genuine

I dont see any issue on this part. All details are there, nicely done, well printed with correct "flat" caseback style as genuine supposed to be.

The lug-end is an icon of bvlgari, and i feel like the strap are 100% pefectly intact with the lug-end, there is no gap at all. Very nice.

 

THE STRAP & BUCKLE

  • No complain on this. High qualty rubber, very details, perfectly intact to the lug without a gap.
  • The buckle are using PEEK material, that is why it feels like plastic. 

 

CONCLUSION

  • Very nice build by GF, very solid, details and well finished. Only some minor flaws there and those are acceptable from my point of view
  • Movement is using Miyota based to reach the thickness. It is quite reliable with 21600 vph
  • $350 - $380 price range is worthy to get this perfect piece

 

BUY THIS PERFECT REPLICA ONLY IN OUR WEBSITE

 

 



by DTIME International on 10 June 2017

Hi guys, welcome back to our website...

Finally I got this revolutionair replica handy now, and have a chance to do closer look on this piece : IWC Portuguese IW503502. Revolutionary? why? because the calendar really working on this version. Date, Day, and month, are working on this YL factory made. YL factory well known as the maker of cheaper version of IWC Portuguese 5007 series. Unfortunately ZF leading the way on that version with some correction. YL factory claimed that this movement and detail decoration is better compare to their previous 5007 series.

First time on my hand, i really impressed with the build, very solid. And when I look at the caseback, there are clearly improves from the previous portuguese 5007 movement series, you will see by keep reading this topic. 

There are 2 major perfection on this model, from my point of view :

  1. Real power reserve, even only approx 48 hours (genuine is 7 days), but this is quite excellent with the power reserve indicator pointing on the right reserve left.
  2. Real working calendar. This is the first time after all for this model. However, please do not expect that it will be real annual calendar. You need to accept the fact that :
  • The date will always end on 31
  • The month will always move after 31.
  • There is no setting position to set the month manually, you need to turn the date wheel to get to current month. Only date and day that have independent crown manual setting. (you can see on video)

Well, lets take a look how good this replica is, away from the features.

 

FACE COMPARE

You won't probably find easy the different on the whole dial. I think YL made this part properly with a good detail. The only noticeable differnt is on the font size of Month, Day, and Date. To make it more clear, i provide another picture as below :

  • The font on replica is too short
  • The font on replica is too thick
  • The date position is not center (maybe other unit have better position on this, i need to make sure)
  • I dont think font style is the issue on this, only the size have some flaws as explain on above points.

 

DIAL DETAILS

  • Except the date, month and day font. I can see perfection on other dial parts, such as :
  • The blue sunburst effect is very nice. I don't think the dial color is off as some guys told me. It is just nice
  • The subdial line is very neat. You won't probably able to see that line if you are not looking at it closely. Bottom line, those sub dial detail are perfect.
  • Hour marker is nicely replicated, i didn't see major flaws on that part
  • No issue on logo's font and size, all good from what i can see
  • Overall on the dial parts, YL is very detail on this part, except date, month, and day font size.

 

CASE DETAILS

  • I like the way YL doing brushing on the outter side case, even some people said it need to be softer, but I love this. The brushed and polished combination on the case and lug are very nice.
  • I don't think crystal and thickness have major issue on this, since  YL use A23j manual wind movement, it won't be too thick compare to 7750 movement i guess.
  • Crown is very detail, there is no sharp feeling when u start to turn it. Crown engravings is nicely done !
  • Only 1 single minor flaws is on the crown thickness, it shouldn't be that thick, need to be a little bit thinner. But I don't think that is something that you should complain.

 

MOVEMENT COMPARE

  • Movement of this model on genuine is Calibre 52850 IWC annual calender 7 days power reserves. YL still use A23J manual wind to replica this calibre. I can see some correction compare to the movement made by YL on Portuguese 5007 series before, but :
  • Black gear is quite annoying to see, it should be there on replica. But YL use gold gear instead of black.
  • It should be SWISS MADE instead of SWISS TECH. Exactly the same mistakes as 5007 series made by YL.

 

MOVEMENT DETAILS

Beside those differences, I think YL also make some perfection on how the decoration are done, and how the movement finished. It is quite details and well build as you can see on below pictures :

All engravings on rotor are well neat. The movement textures also very details from what I can see. Gold engraves are nicely done, except the "Swiss Tech" flaw, and the gold gear that should be black as genuine it is.

 

STRAP & BUCKLE

Nothing to complain. As always replica using crocodile embossed, but I think still quite nice and acceptable as a strap. The curvy lug is there as genuine. The buckle? very details, no complain !

 

HOW THE CALENDAR WORKS?

This is the most interesting parts on this replica since YL made a good breakthru this year by making this perfect model working well. I provide you the video how to set the day, date, and month on this model 

There are some notes :

  • Power reserve indicator is working perfectly. By turn the crown (without un-screw) clockwise you will see the hands is moving from empty to full (7 mark). Please do not over winding. Stop after the indicator reach 7 days mark. And wind it again after the indicator on red area.
  • Do not expect the power reserve will be 7 days. After my test, it is only 48 hours straight with no issue. The indicator is pointing to the right marker, so you will know when the power is empty. You won't be misled by the indicator.
  • Pull the crown to the first position to set the date and day. Turn clockwise to set the date and the month. Month will move after you reach date 31. So you can not set the month manually, you need to turn date by date until reaching the correct month. Turn the crown anti-clockwise to set the day.
  • As video above, you can see that on normal situation everyday, the date will start moving when the hour hands @10 o'clock, and will be perfectly align @12 o'clock. Do not be surprise if you didn't see the day moving, because it will start moving @ 2 o'clock.

 

CONCLUSION

  • The more complicated the watch, the more hard to be replicated. Sometimes you need to accept some flaws on replica especially on complicated model. Remember the price will always tell something. Do not expect 100% exactly like genuine.
  • Overall, YL has made this model replicated nicely, especially with the working features of day, date, and month, also power reserve. 

 

GRAB THIS PERFECT REPLICA ONLY IN OUR WEBSITE HERE



by DTIME International on 16 April 2017

Hi guys,

After a few months being Yacht-Master best seller among other Yacht-Master models, it come across to my mind to make comparison between 2 factories making this models. As we know noob just launched this Rolex Yacht-Master 116655 Everose gold following J factory that has been around in the market for a while. With same movement option ; A.2836 and SA.3135 make a confusing result to the customers, because they have to choose which one is closer to genuine : JF with A.2846, JF with SA.3135, Noob with A.2836, or Noob with SA.3135. There are little information regarding which one is the closest to genuine.

Here I am trying to make a fair comparitson between these two factories :

NO.1 : THE FACE

Both noob and JF on the dial, marker, hands, logo, lettering, the 3D bezel, the material, are all the same. I can't spot any differences on this part between those 2 factories. I will give a score on this part, NOOB : JF ==> 1 : 1

 

NO.2 : THE BEZEL

I am not going to talk about the bar code here, because this barcode will gone once you take of the wrapped plastic. Look at the red circle above, and start compare between 3 pictures. The gap between bezel teeth on noob is to wide comparet to JF, even i still see JF making a bigger gap compare to genuine, but i will say JF made is better on this part. So the sore is, NOOB : JF ==> 0 : 1

 

NO.3 : THE CROWN

This the only spottable difference between noob and JF made on this model. You can see number 1 is telling how different the the 3 circle below the crown logo. At this part, noob was made it closer to genuine, while the middle circle is bigger compare to the other two. And the number 2 is pretty much not spottable, when the JF crown is little bit too fat compare to noob and genuine. I ll put the score in this part, NOOB : JF ==> 2 : 0

 

NO. 4 : THE BUCKLE

  • Look at number 1 on above picture. This is the part that i compare between noob, JF and genuine. I can see that the size of the curve (clasp opener space) on JF is wider compare to noob, and this is very close to the genuine. The edge of the curve is touching the edge of the middle polished buckle part. This is not happen on Noob, they make it smaller and the edge of is not touching the middle part edge.
  • Number 2 : the crown logo on JF is closer to genuine compare to noob. Eventhough the circle at the bottom of the crown are smaller on JF and Noob, but JF make the crown hands better compare to noob, you can see the crown hands on JF is closer to the bottom circle, while Noob is a bit far.
  • Number 3 : JF make the firs link attached to the rubber shorter compare to noob. In fact, noob is closer to genuine on this part.

So the score, NOOB : JF ==> 1 : 2

 

NO.5 : THE CASEBACK

All teh engravings details are the same between these two factory. The only different is the inner circle of the caseback size. Noob make it bigger compare to JF, and i think it is close enough to the gen. So i the score, NOOB : JF ==> 1 : 0

CONLUSION

  • Total score, NOOB : JF ==> 5:4. Which mean from parts that i inspected (5 parts), I will say noob still win even the score is very tight. This is not absolute result if you can make other parts comparison. I only make the major part to compare based on my observation on research. 
  • You will get 2 movement options from these factories, Asian 2836, and Super Asian 3135. You can read the review of these movement HERE

GRAB THIS PERFECT REPLICA HERE



by DTIME International on 03 April 2017

Hi guys,

Today I am going to compare 1 of best replica comes from J Factory recently released on March 2017. It is Rolex Oyster Perpetual 114300 39mm Purple Dial by J Factory. Ater one factory made some of these Oyster Perpetual model (UB Factory), J Factory made some of  them but only on 39mm while UB factory also made 34mm. Let's take a look closer what is the different between genuine and replica (JF made) 

PART 1 : THE DIAL

Look at this ! I really can not spot any flaws on this part. The color of the dial is just perfect, and all lettering, logo, and marker are really well made by J Factory. Even if both are side by side, my eyes still can not spot weather there is differences on this part. Well done !

This is another parts. I didn't put the mark which one genuine, which one JF made. This is on purpose to make you really wondering which one is genuine and which one is replica. The lumenous of JF making (actually the left side) is just extra ordinary. Nothing that you can complain on this.

 

PART 2 : THE CROWN

The left one is replica by J Factory, and the right side is genuine. When you take a look closer, the logo thickness is different, I don't need to mention, you can easily spot that JF crown is too fat compare to genuine. Also the bar below the crown logo, is too fat. But who cares, this is only small parts that you can only see when you put both genuine and replica side by side. If not, I don't think someone will notice at all.

 

PART 3 : THE CASE

This is the magic parts of what JF made. The case thickness is amazingly 100% the same with genuine : 11.5mm as you can see on below pictures :

When we put it both genuine and replica together, this is what happen :

There is no way someone will spot the different, even if they put both together side by side. In fact, nothing different. The shape, the edge, everything is perfectly replicated by J Factory. You can see the engravings on the side of the case, amazingly JF engraves is deeper compare to genuine. I don't know how to say this is a flaws or not. It is just perfect.

 

PART 4 : THE BRACELET

This is the best parts of this replica by J Factory. The bracelet is perfectly shaped and it is match with genuine bracelet. The result, you can put JF bracelet on Genuine watches without any issue and the other way around, you can put genuine bracelet to JF case. 

There is no gap, when we put JF bracelet into genuine Rolex. Perfectly well made and replicated. 

I am not going to talk about the movement now, because it will be my another topic. In fact JF made Super Clone 3132 which is the exact copy of Rolex Calibre 3132. Just like calibre 3135 story, i think it is also perfect. But not now, i ll see you in the next topic of this

GRAB THIS PERFECT OYSTER PERPETUAL REPLICA BY JF ONLY IN OUR STORE HERE



by DTIME International on 24 March 2017

Hi guys, welcome back to our blog section.

Recently noob just released some Rolex Day-Date 228239 & 228206, and also Datejust 126333 & 126003 models with super asian clone 3255 as a perfect clone of Rolex calibre 3255. The price is not cheap, in fact same price with super asian 3135 previously made by Noob with extra ordinary success. We want to take a closer looks how good this movement compare to genuine caliber. We haven't test this yet, what we can do is compare both to see how good Noob replicated this movement from the looks.

Here we go !

Genuine picture we took from Rolex website, so it is not a real movement, but onlny for display purposes, that is why the looks is so perfect. But this is not our point, what we will spot is the structures and how detail Noob replicating this. Overall i will say pretty cool, but I consider asian clone 3255 is not as perfect as asian clone 3135 that previously made. There are some noticeable spots that you can easily see :

  • The Axle : When you see the center you will be very easy to spot what is the different, which is the triangle should be with rubby on genuine, but not on replica. The size of the axle is too big on replica, because it should be another ring after, and this is not exist on replica
  • The Axle outter ring : As we mention above, there is no outter ring after the axle on replica which I believer there is a reason why noob didn't make this.

I dont want to talk all the flaws here, because there must be some, because it is replica. I will talk more about the major flaws only.

From what i can see, noob pretty much detail to make a copy, however when you see more detail, you will spot something different :

  • Should be no screw on the left of "3255", which is exist on replica. And move left, there are 2 gears intack which you can spot the shape difference.
  • After 2 gears, there should be gold gear, which not existed on replica.
  • Some screw at the outter movement also shouldn't be there

Lets move down to the gear train part. There are differences on this part as you can see above picture :

  • Blue hairspring is not there as genuine
  • Rolex and movement serial number also not there on replica
  • There is a frame at the bottom of the gear train, which not exist on genuine

Except from the axle issue that i mention on the beginning, i don's see major flaws on the rotor parts. The shape and finishing is just like the genuine.

CONCLUSION

  • If you are expert, you will notice easily what is the different, but if you are not, i don't think it will be easy.
  • Flaws on replica is normal, if there is no flaws, means the replica price will be as genuine price.
  • Engravings issue is always there on replica, not as neat as genuine. But again, it is not something that you can complain
  • Overall, I will say noob just made something revolutionary movement copy of Calibre 3255 after their success by making 3135 clone movement. I hope this is more reliable, which i believe it is. Next topic will be how reliable this clone movement is, since we have some issue on 3135 in the beginning. Stay updated !

GRAB THE NEWEST ROLEX DAYDATE AND DATEJUST WITH SUPER ASIAN CLONE 3255 ONLY IN OUR STORE



by DTIME International on 17 March 2017

Hi Guys, welcome back to our blog section...

I am very exciting today because finally i got more time to do closer inspection of the most revolutionary movement made by VS factory on PAM 213 Rattrapante model. This is the first replica with real working split-second feature, which mean it has 2 stopwatch hands align together, and you can stop 1 of them to mark the time and the other one is still counting and moving. I don't know exactly how it will be useful, but I consider VS factory just made a good breakthru. Unfortunately i don't have a chance to compare with genuine in my hand, but i will try to analyize based on what I know and some pictures and video refference. Here we go

FRONT FACE DETAILS

Very close and identical, i think on this level, VS factory just made a good move and i think they just made it. Without comparing side by side, i don't think your eyes will gonna be able to spot the flaws. There are some points that i can mention as below :

  • Dimension and diameter pretty much no issue, i can't see major different from the front face. 
  • Ther marker font size, and style i don't think there is a major flaws on that, all good from my opinion.
  • I don't see a flaws on lettering and logo, except the L SWISS MADE L that on replica seems a bit bigger, but i believe it is because of the domed crystal on it.
  • There is lume on the hours and minutes hands. I can see that on replica, the lume box is a little bit wider compare to genuine, but i will not complain for this.
  • Subdial and tachy ring detail i can say very good as well.

To give you more clear, i will provide some macro shot of the dial itself :

All the lettering is just good, very neat and there is no rough edges on every letter of it. The way VSF made a lume on the marker is also good, nothing rough edges on that placement, they are just well placed, and well neat.

Going down down a little bit to see how is the lettering at the bottom of the dial, PANERAI logo, no issue and i think the L SWISS MADE L that i just mention above is wrong, in fact the font size is correct. It is just because of the effect caused by the dommed crystal. As far as I can see, all good.

There are 2 hands on stopwatch hand, and i consider VS factory just make these two hands align perfectly and well placed with a good gap as you can see in above picture. From here you can also see that the lume placement is good. You can see it on 12 maker, very neat and well placed.

Lets move to seconds sub-dial. To be honest, nothing i can say on this, it is just perfect from what can i see. Also on another sub dial and tachymeter details below, i can't say more on this part. 

 

THE CRYSTAL

As we know that PAM 213 have domed saphire crystal. Some people said that on replica the domed is too high, but i don't think it is. Maybe the domed effect to inside dial is a little bit different compare to gen, but i still consider this as "good' as some pictures below :

 

THE CASE DETAILS

After close inspection on dial details, and so far at this level i am very happy with what VSF made. Now i will move to other part which is how the case was built, and how detail it is especially on engravings. Let's take a look closer :

The engravings on the crown guard is nice, pretty deep and neat. The crown gear i am not too sure if this is to sharp or not, but when i touch and turn the crown, there is no sharp feeling, it is just smooth enough. 

It is just amazing for me, all engravings are there perfectly well made, deep enough and the most important thing is there are all neat, there is no sharp edges i feel when i put it on my wrist. Simply nice, i think VS factory just made it very detail and put the best effort to make it.

 

MOVEMENT AND FEATURES

This is the most exciting parts for me, because VS factory is the first factory who make perfect clone mechanism of OP XVIII Caliber, with real working split-seconds feature on it. I am still wondering how reliable this movement is, but i still consider that this is amazing breakthru on replica industry. Before see it closer, let's have a look how the genuine OP XVIII caliber is, see the picture below :

The mechanism should be close to picture above. Eventhough i spot some differences, I think i still say that VS factory has build this perfectly, not exact, but very close. Let see how the mechanism looks on VS factory replica : 

I am not quite happy on this part, since the blue painting on rotor engravings are not as smooth as on the other part, or maybe just because they put the blue color on it. I just realized that this part is quite small, and above picture looks big just because I do macro shot. Let's take a look from different angle :

Well, it's better now. But my eyes will try to move to the finish of the rotor and the mechanism, i will say good for this. 

There is 1 very spottable missed when you compare the genuine and replica on this movement view. The black gear on the genuine is not exist on replica, that's it. I don't know weather you will accept this fact or not, but this is the fact. Among other perfections, there is 1 single thing missed, and i will still say this is very good. Maybe for you guys as well, or maybe not. Anyway, let's move to other part :

 

THE STRAP & CLASP

I don't want to talk too much on this part. For me the way VS factory made the strap is really good, by using carbon fiber material, the offort to copy the genuine is very respecful, The texture, the shape, the padding and all strap detail are really good. Engravings on clasp is very details and neat as well. See all pictures below to get clear picture how good this factory made this :

Now we gonna see how the split-second works and what is the flaws of this feature on replica. To make it more clear, i provide 2 videos for you. First video is VS factory replica as below : 

And the below is genuine video taken from Youtube :

As far as i can see, the way to run this split-seconds feature is the same between replica and genuine, the button are all correct and well functioning. The only different that i spot very clear is when the stopwatch being reset to zero. You will see some bounce on one of the hands of replica when you reset it, while you can't see it on genuine (compare it on two video above).

As a conclusion, I will say this replica is amazing, well build and very match to genuine. But again, you must accept that this is still replica, there must be some flaws that sometimes you still have to accept. Price wise, this replica from VSF is probably the most expensive panerai in the market. Would it be worthy? I think so, and you decide yourself.

 



by DTIME International on 05 March 2017

Hi Guys,

Welcome back to our blog section. Today i want to do a deep review on the newest replica of Ballon Bleu De Cartier made by V6 Factory. This model is : Ballon Bleu De Cartier WSBB0015 Black PVD 42mm. See some general pictures below :

The reason why i do this is just because this model is very new in the market 2017, and this replica is so perfect from my point of view. Today i only want to go on the dial and case detail of this model. Let's have a look closer  of the dial on some pictures below :

As you know, Ballon Bleu model mostly have texture on its inner dial. This texture is very unique, and i believe it will need effort to make perfect replication. In fact, as you can see on above picture, V6 factory just made it perfectly, the texture are perfectly neat as on its genuine. You will feel different angle different view on this texture. Another good parts on this is on "AUTOMATIC" letter printing. Eventho on the texturized background, I still can see it as a very neat printing, there is no rough edged on every letter on that words. You can see even more clear on below picture :

And now lets move down a little bit to see how perfect the words printed at the bottom of the dial :

There is a ring on the outter dial, and it must be texturized as well. As you can see V6 factory made it perfectly, the same pattern of the inner dial texture with a well neat finished. There is "L SWISS MADE L" on that ring, which is printed on texturized background. But as far as i can see, it is also well made, very neat and nothing rough on every edged of the letter. My point of view, it is just perfect !

Lets move left a little bit, when you can see another compulsory details that have to make by V6F to be close to genuine, the "CARTIER: words on 7 o'clock marker. I need to take out V6F sticker in order to see it clearly, lets see it on below picture :

Well, i don't really have issue of hour markers on this version, those looks good, and V6 factory also put CARTIER on the hands of 7 o'clock marker. Still a little rough on this lettering, however i consider this as a very small flaws, in fact this part is very small. Overall, i can see it as a very tolerable flaws.

Lets move up from this part a little bit, to see how clear and good the roman hour marker are.

The minute hands is right on the perfect position which is not touching any hour markers, but also not too far. If you see the edge of the minutes hand, the gap is perfect as its genuine version. How about the cartier logo on the dial ? you can see how good this part on below picture :

Again, this parts need extra ordinary works to make a perfect lettering, especially on logo, because it need to be the same dimension, font, and style in order to replicate the genuine perfectly. As you can see, eventho on the texturized background, the CARTIER logo is so perfect, the font is right, and the dimension i don't think have any issue. Besides, the hours, minutes, and seconds hand are also perfectly well finished. Lets moving right a little bit to see how the date wheel detail :

I have no chance to compare this parts on genuine head to head, but i compared it with the genuine picture on cartier website. I don't see any major flaws on the date wheel size, seems very proportional compare to the whole dial. The frame, size, and font style is correct from my point of view. Maybe need more thicker on the font, but it is very small things to complain.

Now, lets move to the parts that is very important on this model, the crown, and the crown guard. This part is probably the most talkable flaws since the beginning of the replica. I still remember the first issue is the "too small" crown issue, it makes us hard to do crown setting. V6 factory make a better version time to time especially on this part. Now, on the latest version (not only the black PVD, but also on stainless steel version), i don't think you will have crown setting issue anymore, because the dimension now is more perfect, and also the gap between the crown and the crown guard is better now. You can see it on pictures below :

Well, what do you think? For me, it is just perfect !. I wont go to other parts like the strap, movement, caseback etc, because there is nothing i can say on that parts, all good and perfect. This 42mm is very worthed to have.

GRAB THIS PERFECT PIECE OF REPLICA ONLY IN OUR STORE HERE

 



by DTIME International on 28 February 2017

Hi guys, welcome back to our blog section.

Today i will talk about the model from IWC that have really nice simple character, The Portofino series. I am choosing boutique blue dial as a sample. Previously MK factory has made this piece perfectly, however there is a new factory X6 Factiory comes with they claims correctiong the leather treatment, matte instead of blue. Let's have a look closer on this watch form X6 factory :

THE FACE / DIAL

Blue with sunburst effect is very nice, the color is just simply there as genuine, was not too bright, not to dark. Silver hour marks make this piece even more classy by combining with classy navy blue color on the dial. I have a chance t make a closer pictures of it :

  • Look at the marker on the dial, very neat and clear, there is no some kind of mis-align or rough merket. The stainless steel hour marker is there perfectly install with a good thick and smooth edges. The second marker as you can see also very nice, the line is perfectly neat with exact font of the number. Red on 60 marker it is just simply nice. 
  • I don't see any issues on the logo printing, the font is correct and also the dimmension is perfect.
  • Hands are perfect, the shape is nice and the finishing is good, very neat with smooth edges

This is another angle taken by me, i try to spot the date wheel. I think the font size and style is correct, the frame has no issue. When u see from vertical view, you will see that the date are perfectly centered of the frame itself.

"SWISS MADE" printing is very neat, no rough parts on it. Perfectly in the center if you comare with 6 o'clock marker above it.

THE CASE / BODY

Before i talk about the case, i will go firstly on the crown engravings. You can see there is some teeth and it feel very smooth when you try to turn the crown. The logo engraves is very nice and neat. Pretty much no issue at all on this parts. How about the dimension of the crown? i am not sure weather it is exactly as genuine or not, but it is just nice.

This is what X6 do better compare to MK. There is Correction on thickness, no longer curvy on the caseback as MK did. The case finished is also nice, no sharp edges at all.

The lug curve is fine, i can't compare it since i don't have genuine to compare. What can I say on this parts is perfectly well finished with no sharp edges.

THE CASEBACK

The detail are there as genuine it is. All the lettering and pictures are correct. X6 just make this with extremely details. The caseback is a bit flat compare to MK (too curvy). 

Some people talk about the flat engravings at the caseback. But for me, it is not like what people talk about. The engravings are deep enough and very smooth finishing. When you wear it, there is no sharp edges feel on your wrist, simply perfect.

THE STRAP & BUCKLE

This parts is also claimed as the correction by X6 compare to MKF, the strap finish is better on X6, matte instead of polished. It is true, and on this model, X6 use blue grain crocodile pattern instead of black as MK did. 

The buckle is very nice feel, smooth and there is no sharp edges around it. The logo and lettering is perfectly neat and engraved properly. No issue at all.

THE VIDEO

 

 

FIND THIS BEST PIECE OF REPLICA ONLY IN OUR STORE HERE

 

 



by DTIME International on 12 February 2017

Hi guys, welcome back to our blog section.

Today I will try to make comparison between genuine and replica on SevenFriday P3B-01 made by V6 factory. I think everybody knows that almost all of SevenFriday model was replicated perfectly, maybe the most flawless replica compare to other brands, even the NFC is working well and stated the serial number on the watch itself. I took this model as the example, And you will see how perfect it is compare to genuine.

THE FACE

Did you spot any differences? I am not. V6 factory just made it so perfect, no dimension issue, no material issue, no finishing issue.It is just perfect replication, nothing more i can say here. Lets see closer look on dial

Up until this level, i still can't find any flaws on the dial perspective, the logo, fonts of letters, font dimension, position, marker size, gear position, all perfect, no different at all from my point of view. Or maybe you need to look at it carefuly, i believe there is differences even only small things. But by clear eyes, nothing spotted. Lets move on to the other parts on the face side.

There you go, I finally can spot at least 2 flaws on the crown and crown guard.

  • You can see the crown guard on replica at the edge curve have different degree compare to gen. Genuine have a sloping crown guard compare to replica, take a look on yellow sircle i made on both side of parts.
  • There is also a small gap at the bottom of the crown on replica, while on genuien is very solid and pack.

Those 2 points is not a big flaws, only small flaws when you compare genuine and replica side by side, if not, you won't gonna find it.

THE SIDE & STRAP

Most of replica have thickness issue compare to genuine, but i didn't see that issue on this model. As you can see, the thickness is correct, and all engravings on the side of the case are made properly, it is just perfect.

This model is using sport calf leather strap with black color. The most important part on this strap is on the upper side of the strap need to be a texture and pattern. When I compare it with genuine, i didn't see any major different between those two straps. As you know that replica also using genuine calfskin material to make this strap closer to genuine. You can see on both side of strap, there is no different at all, and also the buckle, i don't think there is an issue of replication. All good.

THE CASEBACK, NFC,  AND MOVEMENT

I don't see any issue on this parts, since genuine and replica both are using Miyota 9015 movement with 21,600vph. There shouldn't be any problem for V6F to make a perfect replication on this parts. But let's see it on pictures :

All engravings are the correct, pretty much no issue at all when I try to compare the font size, the lettering and the engravings it self, All perfect, no issue.

Since replica and genuine are using the same movement calibre which is miyota 9015 japan, you can see there is no different on this parts when you open the caseback and see the movement. All correct, no issues at all.

How about the NFC? It is working, when you scan the caseback with your phone, you can see the serial number will popup on your phone and it is match with the serial number on the watch even it is replica. The only issue is, ofcourse you can't do registration to SevenFriday apps, they will not accept serial number on replica, you should know this for sure.

I use the picture of P2B series (woody), but it will be the same with any working NFC SevenFriday replica. Don't try to register this to SF apps ok!, it won't be accepted for sure :).

Here is the video of this product to help you see it in better view :

 

Bottom line, this is probably a perfect replica that you should have, I believe there is no one will notice that you are using replica. Even NFC, its working. GRAB THIS PERFECT REPLICA ONLY IN OUR STORE HERE



by DTIME International on 22 January 2017

Hi guys, welcome back to our blog section. Today i want to take you out a little bit from mainstream zone, we know that almost every poeple talking about how good is Rolex from Noob, Audemars Piguet, IWC, Panerai etc. Those are the mainstream brand which you never lost such a small information, because people always talk about them all the time. 

Start looking for something that is not mainstream, because there are bunch of perfect replica arount the industry that you can take a look deeper and suddenly you will realized how perfect are those, and how close are those replica compare to genuine. We will talk about GLASHUTTE ORIGINAL specificly Senator Sixties model. 39-52-01-02-04 Senator Sixties from G factory is our model to compare with genuine. Let's start knowing how good it is !

FACE/DIAL

Can you imagine how if we take of the label "GF" and "GEN" on picture above? Would you be able to spot which one is fake and which one is genuine? definitely NOT !. The first reason is just because people never talk about it, the brand is not as famous as other mainstream brands. The seconds is technically G factory make a perfect replication on this model. You can see all the details on the dial are the same compare to genuine. From the marker, hands, color, logo, finishing etc. All just perfect. 

Can you spot any flaws? Only a very small flaws that probably someone can see. The "Glashutte Original" words on the dial is a little bit heavy on the replica compare to genuine. The rest? not at all, just perfect !

THE CASE DIMENSION AND THE CRYSTAL

This parts is the key of its beauty. You can see that the font itself was made to produce "zoom" effect. 3,6,9, and 12 fonts is just like magnified font. And then the crystal dome is the key, It will make even more perfect 3 dimension on the dial. Well, fortunately G factory made the perfect replication on this part, you can see the crystal is just perfectly produce 3 dimension effect as the genuine is. You can see on below picture to make it clear :

It is just awesome ! the dome is perfect, and when you see the dimension of the case is also perfect. No issue at all. 

THE MOVEMENT

When you choose displayed caseback, this is gonna be your obvious flaws. Not only on this brands, but also happen on other brand with displayed caseback. There are 3 major flaws that we can spot right away when we put those piece side by side (see the number mark on above picture :

  1. The center of the rotor is slightly different, you can see on above picture that on genuine is more simple and have bigger screw as the center.
  2. Look at the gear number 2, the center is slightly different compare to genuine
  3. Look at number 3 on above picture, it should be no clear pattern on this part. But G factory put the engraved pattern instead of making it plain.
  4. The wheel should be silver instead of gold.

Without having fake and genuine side by side, you will not gonna be able to spot wheater it is replica or genuine. The flaws will only be noticable when you put them side by side and do deep inspection on it. 

THE STRAP AND BUCKLE

Nothing else we can say, it is just perfect ! G factory just made it. 

THE CONCLUSION

There are too many eyes on mainstream brands, there are too many eyes on mainstream replica factory. Sometimes we forgot that there are bunch of un-discussed perfection on other brands available in replica industry. This Glashutte model is probably one of them. It is just perfect build when you start looking on it. Just be different, stop being mainstream people for some reasons. There are something even more perfect compare what people mainly talk.

GRAB THIS PERFECT REPLICA ONLY IN OUR STORE HERE



by DTIME International on 16 January 2017

Hi Guys,

Welcome back to our blog section. This is our second review of the same model Breitling Avenger Blackbrid V1731110, but what we are reviewing today is from G Factory. And now more into comparison between genuine and what this factory made. As you know that GF is specialized on Glashutte and A.Lange replication, they are good at it. Now they start to make a breakthrough by making one of the famous Breitling model.

Before go into deep, We will tell you something, that compare to other factory, GF made a significant correction on the back case. "GERTIFIE" issue existed on other factory version now no longer exist, GERTIFIE now corrected become CERTIFIE. So for you who love the perfection on detail, GF will be the best one to choose. You can see on below picture :

Now, let's start comparing between this factory made with the genuine of this Breitling model :

THE FACE / DIAL

If we put it side by side betwen GF and genuine, I will say that pretty much no issue on dimmension, GF has made this replica even better. DLC finished on titanium case is perfectly produced the same color with genuine, however the replica need to be more shiny on finsihing, because when you see it, the gen a little bit more shiny, yeah that is only 1 small flaws, basically you can do special treatment on this replica to be more shiny.

The bezel engraves is also nice, same detail with genuine, almost no issue. When you see it side by side from a bit far, there is no doubt that you won't spot any flaws at all. You will be so confuse which one is genuie, which one is replica. It is just perfect. How about the dial detail? Let see it !

Need a good eye to spot the flaws of GF replication, because you will spot a very small flaws on it when you start looking on it deeply. Here are some flaws we spotted :

  • All letter on dial should be more thicker, you can see on replica is a bit thin, that is why it will look smaller on the font size, in fact it is only need to be thicker.
  • The date font need to be thicker to reach genuine model, however the font style is already correct. Just need to be a bit bigger and thicker.

In other words, ther are perfections on this replica :

  • The dial finish is correct
  • The marker dimmension is correct
  • The hands (seconds, minutes, and hours) dimension are correct
  • The logo is exactly perfect like genuine
  • I can't spot the pinion size difference between replica and genuine, all perfect

THE MOVEMENT

GF using modified A.2824 movement with 28,800bph, perfectly the same specs with genuine. And on this parts, you will find some easy spotted flaws, such as :

  • Breitling and letter engraves on the rotor is not too perfect, you can see easily that genuine have super neat engravings. On the replica the engraving is rough, and the font is too small.
  • Still on the rotor, you will see that there are lines on the rotor, but on genuine is not clear line, only shadowing line. But on the replica, you can see clear engraved line, and there are too many line on the rotor. 
  • There is a number near by the wheel on genuine, and there is not exist on replica

The rest I will say very good, very detail. All the screw, and the gear are there perfectly like genuine. All flaws above can be covered easily, because the caseback of this model is solid, not displayed. Also you can only spot the different when you open the case and put them side by side. If not, you won;t be able to identify easily weather this is replica or genuine.

The price is slightly higher compare to previous version, and this is very worthy to have all perfections.

GET THIS PERFECT VERSION ONLY IN OUR WEBSITE HERE



by DTIME International on 07 January 2017

Hi guys, welcome back to our blog. 2016 has been our best year for selling high-end replica around the world. Just to let you know, that our website have around 1,500 models of replica watches from more than 50 brands available. Based on my experience in 2016, there are some high-flying sales from each brand, and this is happen with reasons behind. We will list top 3 best selling replica watches model from each brand, and we hope these can be your guide to choose which replica watches that you might buy/have based on what people mostly buy.

Instead of only presenting the facts, we will give you possible reasons why people buy those models/brands. We will break down the blog into some pieces because we are about trying to show every brands based on our sales report in 2016. Here we go !

NUMBER 1 : Saxonia 384.026 Real Moonphase Large Date Stainless Steel GF Factory 1:1 Best Edition White Dial On Black Leather Strap A.2824

This models is the first model we reveiewed among all of A. Lange Sohne models (Read our review HERE). Made by G Factory who is specialized in German watches replication such as : Glashutte, Nomos, Montblanc etc. This model is probably the most flawless replication. From the dial, case material, case finishing, movement decoration, features, there is no such major flaws. All perfect except the date font is a little bit too thin compare to genuine.

With $318, you will have such perfect dress watch piece with elegant features such as grande date, and working moonphase. With A.2824 movement as additional reliable factor to choose this as your personal collection. Buy this piece HERE

 

 

NUMBER 2 : Saxonia 384.032 Real Moonphase Large Date 18K Rosegold GF Factory 1:1 Best Edition White Dial On Brown Leather Strap A.2824

As different style from the same model, 18K Rosegold has been chosen by some gold lover to make their wrist even more elegant. All perfections are the same with number one. This model become number 2 is just because gold lovers have less number compare to stainless steel lovers. 

The most common reasons of not choosing this model is because the gold on replica is only plated, not full as what people want, not even thick. But regardless, gold lovers will choose this model instead of stainless steel version. Buy this model HERE

 

 

 

NUMBER 3 : 1815 211.026 Saxonia Thin Stainless Steel Silver Dial MKF Best Edition On Black Leather Strap Miyota 9015

Simplicity is probably the common reasons why people choose this model. With only minutes and seconds features, no date, no chronograph, no nothing more just simplicity. Some people love simple model. This model has been made by MK Factory who is specialized on making some IWC watches. I will say not too hard to do replication of this model for well experience factory such as MK. 

Despite the perfections, MK only choose miyota 9015 as the movement of this model. It is not a big issue, as Miyota itself is probably the most reliable movement among japanese movement with 21,600 bph. They did this with price reasons, they want wide range of customer who buys. $288 for this watch, is quite affordable and worthed to have such perfect replica with reliable movement. Buy this piece HERE

 

 

NUMBER 1 : Royal Oak 15400 41mm Stainless Steel Case JF 1:1 New Version Black Dial on Stainless Steel Bracelet A3120

No doubt, J Factory always made Audemars Piguet perfect flawless replication. With the newest version of this model (correction on dial color and textured) leads peorple to buy this model more and more. This model is probably the most elegant among all sporty Audemars Piguet models. People love this also because of the case diameter is only 41mm and very friendly to almost all wrist size. And most reasons is the thickness, in the newest version is exactly the same with genuine (10,5mm) while the previous model is a little bit thicker compare to genuine.

To make it thin, JF must choose Miyota 9015 as movement, but JF must change the beat from 21,600 to 28,800 as genuine, and they made it. Decoration of the movement is just perfect on the newest version of this model. Nothing more I can say, just perfect !. Buy this piece HERE

 

NUMBER 2 : Royal Oak Offshore 26470ST.OO.A101CR.01 Black Themes Stainless Steel Case 2014 JF Best Edition on Black Leather Strap A7750

2014 model of Black Themes models is the most demandable model out of all ROO chronograph 42mm. Possible reason for this is because this model have very nice looks, perfect combination between Silver, Black, and Red color is just perfect. Sporty look in elegant feel. Made by J Factory, perfection has no doubt on this one. Common flaws on this model and pretty much on every model of ROO 42 are : date wheel position is too close to the tachymeter ring, and slightly thicker. But nothing else you can do about it since JF is the only factory who made this model perfect.

A.7750 on this model is a must, because of chronograph function. After some reliability issue on the first generation, JF has made this become more reliable in new version. Buy this piece HERE

 

 

NUMBER 3 : Royal Oak Offshore 44mm 26400AU Real Ceramic Novelty Forged Carbon JF 1:1 Best Edition Black Dial On Black Rubber Strap A3126

Novelty 44mm case diameter is not too demandable due to the size is too big on average wrist. But this is not happen on this one, we have more sales of this model in 2016. I believe it is because of the perfection especially on the real forged carbon material has been placed by J Factory on this model. Rubber strap is the safest way to have replica, since most of replica are using fake crocodile leather strap. 

Besides all perfections, JF also make the Asian 7750 movement even more reliable compare to the previous batch. But again, by moving seconds hands from 9 position to 12 position will always raise some issue in the future. However, all of this matter will disappear from the customer point of view, just because the perfection is more than the flaws. Get this piece HERE

 

 

NUMBER 1 : BR03-92 Stainless Steel Golden Heritage ZF 1:1 Best Edition Black Dial on Brown Leather Strap MIYOTA 9015

Z Factory keep upgrading the skill to make good replication. Mastering in some brand like Panerai, Bell & Ross, Tudor, and IWC, this factory produces better quality compare to other factory on making those brands. The reasons why this model is the most demandable model is because of the material and dial finishes is very nice. Exactly like genuine, no issue. 

Some factroy made this model with thicker case, but not for ZF. The dimension has no issue. Again, Miyota 9015 helps the thickness become thinner, and 21,600 bph is the consequently. But I will say no option for the movement, since ZF is the only factory who made this model perfect. The combination of gold color, black, brown leather, and silver case is just so perfect. Get this piece HERE

 

 

NUMBER 2 : BR123 Vintage Sport Heritage Limited Edition Stainless Steel Brown Dial on Brown Leather Strap Miyota 9015

This model now is not going to be available in stock, because of the factory stop producing this model. We never know why, but that is the fact. On the first productions of this, the factory never produce in a large number of quanity, only a few were in the market.

Being a rare item will always be an advantage for this model. When it is available, it will be gone quickly. Not only that, the built is also nice and perfect, even made by small factory, but I will say the quality is outstanding. Limited edition on genuine, and the replica factory made this limited production as well. With miyota 9015 on 28,800 bph, will face no issue at all. Unfortunately, you can't get this one right now, and we are happy to sell so many of this in 2016 before disctontinued.

 

 

NUMBER 3 : BR03-92 Heritage Black PVD On Stainless Steel Case ZF 1:1 Best Edition Black Dial on Brown Leather Strap MIYOTA 9015

Same story with the Golden Heritage, this model is also made by Z Factory with all of the perfection. The different is only on the case finishes. This model are PVD plated on stainless steel material. For someone who prefer black things on the wrist will definitely choose this model, and this is why this model has been top 3 best seller in 2016. But again, something plated on other material will raise some issue in the future.

ZF always choose miyota for all BR03-92 models to make the case thinner and close to genuine version. Miyota 9015 on this model is on beat of 28,800bph, very similar to Asian ETA. Buy this piece HERE

 

 

 

NUMBER 1 : Fifty Fathoms 5015-1130-52 Black Dial Stainless Steel Noob 1:1 Best Edition Stainless Steel on Sail-canvas Strap A2836

Noob Factory has been consistently developing this models, since the previous version has been pulled back and now with updated version in the market. With perfection on "Blancpain" engravings on the side of the case. This piece has been the most valuable and demandable replica watches around the market.

The material built of this piece is extra ordinary, very neat and especially the bezel and the lume, both are perfect. Well, price will always tell the quality, even if only with A.2836 movement, this piece market price is between $400-$500, not cheap but the price showed the quality of this replication on this model. Buy this perfect piece HERE

 

 

NUMBER 2 : Fifty Fathoms 5015-3630-52 Black Dial Noob 1:1 Best Edition 18K Rosegold on Sail-canvas Strap A2836

Gold will always come in second place after stainless steel. This fact is based on our selling experience. It is just because the gold lovers number is less than stainless steel lovers. 

All perfections are the same with the stainless steel version, only gold plated is the difference. The price is slightly higher compare to stainless steel version, but it is the consequency of gold material being placed in stainless steel case. Asian 2836 movement inside this replica, and it is reliable enough to cover the features of this watch. 

Buy this piece HERE

 

 

NUMBER 3 : Fifty Fathoms 5015D-1140-71 Blue Dial Noob 1:1 Best Edition Stainless Steel on Sail-canvas Strap A2836

Not everybody love blue, but all of the brands have blue theme on their models. There is no choice on Blancpain models if you want blue theme. Only this model have perfect blue replication made by Noob Factory. Same story with above blancpain from Noob, nothing more i can say about the quality, it is just the same with I just mention above.

This model is a little bit different from other model, there is sunburst pattern inside the dial, but it is not full dial, like inner dial with perfect pattern. When you look at it from different angle, you will see how good it is. The blue color also not too bright, more into navy, just perfect.

Buy this piece HERE

 

 

NUMBER 1 : Classique 5177BR/12/9V6 Automatic 18K Rosegold MKF White Dial Roman Markers on Brown Leather Strap MIYOTA 9015

This is the only brand when the gold is being number 1 selling in our website. We are guessing that maybe because of the position of the brands itself is related to mature excecutive classy people who loves more into gold luxury stuffs. Or maybe because of the looks itself is very classy, combination between white plain textured dial with gold and brown leather are perfect, compare to stainless steel version. Or maybe, because of the genuine on silver color is white gold, while the replica is stainless steel. There are more possible reasons.

Besides, MK factory has made this piece perfect, include the breguet engraved stamp on the dial. The thickness is very close to genuine compare to other compliatcions model of Breguet replica. Buy this piece HERE

 

NUMBER 2 : Classique 5177BR/12/9V6 Automatic Stainless Steel MKF White Dial Roman Markers on Black Leather Strap MIYOTA 9015

This piece have the same quality of the gold verison as we mention above. Made by MK Factory with Miyota movement inside. Thickness is no issue on both of this. Reliablity is also un-argueable, because Miyota has been around the market since long time ago. But it should be white gold material instead of stainless steel, nothing you can do here because none of replica are using real white gold, not even plated. 

All the detail engravings are there made perfectly by MK factory. This is maybe the reasons why people choose this, even the case material is different. Price, maybe also the concern.

Buy this piece HERE

 

NUMBER 3 : Classique Complications 5307PT/12/9V6 Tourbillon Stainless Steel Case TF 1:1 Best Edition White Dial On Black Leather Strap Asian Seagull

This is beyond my expectation being top 3 best seller around Breguet brand. Because I think T Factory was not made this piece perfectly. The tourbillon is real, but there is something missed on the tourblion parts. The Pole is missing, and this is not too good because you will see it easily from the dial. Beside that, the thickness is always be an issue on tourbillon replica. TF not put too many effort to make this model perfectly.

Well, people have reasons to choose, maybe out of tourbillon models on Breguet, this is quite the best. Or maybe something else that we don't know. From the material built, it is perfect, and TF also put breguet signature on the dial, and the texture of the dial is replicated perfectly. Buy this piece HERE

 

 

NUMBER 1 : Navitimer AB012012/BB02 Chronograph Stainless Steel JF 1:1 Best Edition Black Dial on Black Leather Strap A7750

J Factory has made this replica long time ago, pretty much nothing to improve because it is good already. No wonder this model is being number 1 top selling in our store, becuase its been a while around the replica industry. We try to make proper judgement on this one, which is the material built is good, and the leather quality is nice. Even there is no imporvement, pretty much nothing to do with this one. 

Movement is using Asian 7750 without needing extra ordinary decoration on the back side of movement, because the caseback is closed not displayed. 7750 is quite reliable and all replica with chronograph function are using this movement. Buy this piece HERE

 

 

NUMBER 2 : Superocean Chronograph Abyss A1334102 Black Dial White Hands on Stainless Steel Bracelet A7750

Breitling lovers prefer more into chronograph models, because most breitling are Pilot based, and the image is "complex" features. Therefore, this model is being number 2 top selling on Breitling brand in our store. Besides, the technical perspective also good, movement si very reliable Asian 7750 without needing any modification, just placed as 7750 should be. 

What makes this model are demandable is because of the quality of the bracelet is just nice, well finished. As the caseback is not display, there is no flaws on movement decoration, all perfect. There are some color option on this model : White subdial frame, blue, red, and yellow. White is match on silver color, therefore, this model is more prefered compare to other color in the same model. Buy this piece HERE

 

 

NUMBER 3 : Avenger Blackbird V1731110 DLC Black On Titanium Case 1:1 Best Edition Black Dial On Black Nylon Strap A.2824

This model was around the industry by the end of 2016. But people seems to be waiting for good replication of this model. And finally Noob make it happen at the end of 2016, and boost the sales to be the top 3 in our store among other Breitling models. We made review on this model HERE.

​​​​​​The case is made by black PVD plated on titanium case, and the dial is so perfect as i mention in my review. However there is a small flaw on the caseback engraving, "GERTIFIED" instead of "CERTIFIED". Now this model has been disappear from the market and become rare item. I am hoping noob will make an update on the new version availbale in the future. Buy this piece HERE

 

 

This is the first parts of the blog, because there are so many brands that i have to put. And it will be in Parts 2, Parts 3 and so on. Keep updating our blog !



by DTIME International on 07 January 2017

After the first couple brands review ( Read HERE ), now this is the 2nd part of 2016 Top 3 Best Selling Replica Watches by Brand. Here we go !

NUMBER 1 : Cartier De Santos 100 W2020010 38mm Titanium Bezel DLC Stainless Steel Case V6F 1:1 Best Edition On Black Nylon Strap A.2836

This model is very rare in the market since it was launched. That is way this model is probably become the most demandable model out of all Cartier model, just because very rare in the replica market. V6 Factory had perfect strategy to make this piece fully demandable.

Talking about perfection, I can say nothing to say on the case and dial, made by stainless steel with DLC coating and perfectly combine with titanium brushed on the bezel, it is just a perfect built. There are some flaws on the dial marker, but it is only a matter of small gap between the marker (only between 9 and 10 marker), the rest is perfect. Strap quality I can say so so, nylon canvas is good, but at the back of the strap is easily pop out near by the end link. Movement is good with Asian 2836. Buy this piece HERE

 

 

NUMBER 2 : Ballon Bleu De Cartier W69012Z4 42mm Stainless Steel Case V6F 1:1 Best Edition White Texture Dial on Stainless Steel Bracelet A2892

Out of all cartier models, this one is probably the only one who has update version time to time. The recent update from V6 Factory is on the crown size, now become bigger and easy to control by hands. The old version is too small and hard to do crown setting, because the position of the crown is in the middle between case and crown guard. Besides that, V6 factory also made certain improvement on the case build, now become more solid, and the dial finish is now become perfect. 

I think this is probably the reasons why people pulled a trigger to buy this model. Besides that, this model have 3 sizes to choose, 42mm, 38mm and 33mm. Some peope want to buy a couple watch, and this model is the perfect choice. Buy this piece HERE

 

 

 

NUMBER 3 : Calibre De Cartier Diver W7100056 Stainless Steel Case TF 1:1 Best Edition Black Dial On Black Rubber Strap Miyota

Sporty !, this is probably the common reason why this model become top 3 best seller out of all Cartier model in 2016. Perfect case diameter 42mm, good looking, and well built by T Factory. There are some choicec for this model, but this color combination between black and silver on the case and dial is the most preferrable color.

Talking about the movement, T Factory is using Miyota with 21,600 bph, it is more than enough to make this piece reliable to wear. There is no complicated decoration on the back of the movement, it is simply perfect replica to have. When you touch the rubber, I will say the quality is above expectation, good, flexible and comfort to wear. Buy This piece HERE

 

 

NUMBER 1 : Senator Sixties 39-52-01-02-04 Automatic Stainless Steel GF 1:1 White Dial On Black Leather Miyota 9015

2016 Is our best year to sell this model, there are so many customer happy about this model especiall from Germany. G Factory is the only factory who made this even better compare to other factory like YL factory. Perfect dress watch with good looking crystal design and seems like zoom effect of the number inside the dial. White dial become more popular among this Senaotr Sixties models, because with combination black, silver and white will make easily match with the attire. Gold accent on the marker made this piece even more classy. 

The only concern about this model is the leather strap. Don't get me wrong, it is good, but since not using real crocodile, the color of the strap will be fading time to time. Easy solution, create genuine custom strap for this. Buy this piece HERE

 

 

NUMBER 2 : Senator Navigator 39-34-07-07-04 Chronograph 44mm Limited Edt. Stainless Steel GF 1:1 Best Edition Black Dial On Brown Leather Strap A.7750

The powerful part of this model are the lume. G Factory using SuperLumiNova placed on the marker. It is simply perfect and beautiful. Besides that, as usual, G Factory always made the material built perfectly well finished. The brushed and polished combination on different parts of the case and bezel is just in tune.

Chronograph function will require the movement using Asian 7750 by doing modification not to use 1 of the subdial. Reliability is no doubt, and  decoration of the movement is also not a big issue for G factory to replicate. Leather strap is using genuine calfskin with perfectly engraved at the back just like genuine version. Buy this piece HERE

 

 

NUMBER 3 : Senator Sixties 39-52-09-02-01 Automatic Stainless Steel GF 1:1 Blue Dial On Black Leather Miyota 9015

Same story with the white dial version, This model is simply different dial color. But when you see it, the blue on this watch is very nice, there is a dome view if you see it from the front. Marker as i said on the top 1, simply zoom effect. 

Nothing else to say, because i already mention how G factory made this perfectly. Flaws are there, but it is not hard to solve, as simple as replace the leather with genuine custom, or even OEM strap for this model. 

Miyota movement with 21,600 bph is very reliable enought to cover the features. The thickness is only 10.5mm is probably another reason why this piece is so demandable. Buy this model HERE

 

 

NUMBER 1 : Big Bang Evolution 301.SM.1770.GR Stainless Steel Carbon Fiber Dial V6F On Rubber Strap HUB4104

There is no doubt that V6 Factory or previously called HBB factory is the master of Hublot Big Bang replication from the begining of its career. No wonder what V6F made on this Big Bang model is so perfect. Again, the combination between Brushed steel, textured black dial, and Sporty black rubber, is the reason why this model become number 1 best seller among all Hublot model.

Look at the dial, it is very nice and close to genuine. Talking about movement, Asian 7750 is a must to cover chronograph function on this watch. Nothing too special to placed the 7750 on this, but consequently will make the case a little bit thicker. But its ok, it is only minor flaws out of perfections. 

Buy this model HERE

 

 

NUMBER 2 : King Power OceanoGraphic 731.NX.1190.RX 48mm Diver 4000 Titanium Case V6F V2 1:1 Best Edition On Black Rubber A.7750

Why this model become top best seller? The built ! that is the main reason. Made perfectly by V6 factory who is the master of hublot with perfect titanium finished on the case, and all the detail of complicated parts on this model are replicated perfectly. The only reason why people don't really like this model is because the diameter is too big (48mm) and too thick. There is no way for small wrist to pick this perfect piece. It is just not fit. 

Even no chronograph, this model is usind Asian 7750 to cover certain function to get closer to gen. Reliability is no doubt, and there is no different thickness compare to genuine. Simply sporty and strong character ! Buy this model HERE

 

 

NUMBER 3 : Big Bang Evolution 301.PM.1780.GR Rosegold Carbon Fiber Dial V6F On Rubber Strap HUB4104

Same built like the number 1 best seller on Hublot page. This model is perfect for gold lover who want to be sporty watches. Even with gold, the strong character of this model is there, super sporty. The gold plated is not polished but brushed like genuine, V6 Factory made this replica become demandable with all perfections on it.

Movement as I explain on number 1 best seller is the same using Asian 7750 chronograph, running with 28,800 bph, super smooth. Thickness is slightly thicker compare to genuine, but it is only minor flaws, nothing to do about it.

Buy this model HERE

 

 

 

NUMBER 1 : Portuguese Real PR IW500705 ZF 1:1 Best Edition White Dial Blue Markers on Blue Leather Strap A52010 V3

Noob Factory has been consistently developing this models, since the previous version has been pulled back and now with updated version in the market. With perfection on "Blancpain" engravings on the side of the case. This piece has been the most valuable and demandable replica watches around the market.

The material built of this piece is extra ordinary, very neat and especially the bezel and the lume, both are perfect. Well, price will always tell the quality, even if only with A.2836 movement, this piece market price is between $400-$500, not cheap but the price showed the quality of this replication on this model. Buy this perfect piece HERE

 

 

NUMBER 2 : Big Pilot Real PR IW500916 Stainless Steel Le Petit Prince 2016 ZF 1:1 Best Edition Blue Dial on Brown Leather Strap A51111

Le Petit Prince limited editon has always become an icon out of all IWC model. After made success story on replicating the previous Le Petit big pilot ( See product HERE ), Now, Z factory repeat another success story by making the newest edition of Le Petit Big Pilot with replicating the newest version on genuine with number marker. 

Again, the real power reserve is the key of successful selling on this model, more thant 48 hours with correct pointing on 7 days sub dial power reserve indicator. Even with Asian 23J based movement, this model is very reliable, I never found my customer complain about the reliability. Buy this model HERE

 

 

NUMBER 3 : Portuguese Chronograph Stainless Steel Case IW371417 White Dial Blue Marker ZF 1:1 Best Edition on Blue Leather Strap A79350 (Correct Thick)

Previously, noob made this model, but since Z Factory released the newest updated version in the end of 2016, this model become so popular, and the sales is running like can't be stop. Why this is happen? I think because of the correction on the thickness. Now Z factory has made the thickness better compare to noob. 

Base Movement: Asian 7750 automatic movement at 28800vph; ZF New Decoration: Platinum plated movement plate and rotor which are made according to the genuine movement, the direction of words is same as genuine, this is ZF unique decoration and very close to genuine. Buy this piece HERE

 

 

 

NUMBER 1 : Master Compressor Diving Automatic Navy Seal Stainless Steel Case Dark Grey Ceramic Bezel On Canvas Leather Strap A.2836

This model has been around the replica market since long time ago, but still this one probably the best Jaeger LeCoultre replica compare to other model. Perfect built and superb lume. Well finished stainless steel case with dark grey ceramic bezel is the beauty of this model, that is why so many people buy this model like no tomorrow. The diameter is quite friendly 42mm, and leather version is more demandable compare to rubber bracelet version.

With Asian 2836 movement, I never found any significant issue on every replica. Running with 28,800 bph has made the sweeping hand become so smooth. Buy this piece HERE

 

 

NUMBER 2 : Master Ultra-Thin Q1378420 Réserve de Marche Stainless Steel Silver Dial ZF Best Edition on Black Leather Strap A.938

Super thin case is probably the main reason why people buy this more and more. Simply classy with perfect sub dial on tis dial. Power reserve indicator is working, and the date also working well. Z Factory made this model with good result, all details are there just like the genuine version. There is never been any dress watches with big size, so this 38mm is definitely perfect to be the friendly reason for your average wrist size. 

Asian 23J automatic movement decorate to Jaeger-LeCoultre Calibre 938 movement has been placed to support this watch, and in fact, this movement is quite reliable, no major issue so far on this movement. Buy this piece HERE

 

 

NUMBER 3 : Master Ultra-Thin Q1368420 Moonphase Stainless Steel Case Best Edition Silver Dial on Black Leather Strap Miyota 9015

Working moonphase is probably the main reason why people love this model. With no complication on the dial, has made the moonphase indicator become center of attention on this one. Classy is the character, very nice dress watch with perfect combination between silver dial, silver case and black leather strap.

Miyota 9015 movement is more than enough to support the features of this watch, and it is very reliable. Unfortunately the leather is not genuine crocodile as all replica have, but this is normal issue and very easy to solve by replace it with genuine custom strap around the market. Buy this piece HERE

 

 

NUMBER 1 : Master Moonphase L26734786 Chronograph Stainless Steel JF 1:1 Working Moonphase White Dial on SS Bracelet A.7751

The only reason why this model is so demandable is because all of the features on this watch are working perfectly just like genuine version. Moonphase, 24 hours, Day-Date, and chronograph, all in 1 perfect package with perfect built by J Factory. When you touch the bracelet, very smooth and solid, and the dial pattern is very neat, there is no miss align or broken words caused by the textured on the dial.

J factory place the Asian 7751 movement to support all the features working well, and it is quite reliable. There is a guidance to set this watch provided by J factory. Simply nice. Buy this piece HERE

 

 

NUMBER 2 : Master Moonphase L26734786 Chronograph Stainless Steel JF 1:1 Best Edition Working Moonphase White Dial on Brown Leather Strap A.7751

Not every people love the stainless steel bracelet. For this kind of people, leather strap is the best option. With white dial, brown is the perfect choice for leather instead of black. Eventhough it is not genuine crocodile leather, but I will say the strap is quite nice to have. For you who want to replace it with genuine leather, there are so many choicec around the market.

J factory place the Asian 7751 movement to support all the features working well, and it is quite reliable. There is a guidance to set this watch provided by J factory. Simply nice. Buy this piece HERE

 

 

 

NUMBER 3 : Master Collections L26284786 Stainless Steel Case MKF 1:1 Best Edition White Textured Dial on Stainless Steel Bracelet A.2824

MK factory now jumpin to compete by making some of Longines model. Smart move to make the simple model instead of complicated model. By making this model, It is successfully drive a good sales, and this model is the top 3 best seller among other Longines model in our store. 

Simply analog will only require standard movement placed. But MK Factory put better movement which is Asian 2824-2 running with 28,800 bph. This is just perfect choice for people who want simplicity.

Buy this piece HERE

 

 

2nd parts is done, keep update our blog section to read more brands top 3 best seller in 2016.



by DTIME International on 15 December 2016

Hi guys, 

Welcome back to our blog. At the end of 2016 there is one replica factory just come up with something good, i can consider as Flagship replica, the Panerai PAM441. After V6F and SF has made the best PAM441 with almost flawless, and now VS factory suddenly come up with better idea compare to the other. With the same real ceramic material, this version also made significant improvement compare to other factory. All parts are really made exactly copied 1:1 from the genuine. Let's take a look closer and more details :

THE FACE/DIAL

No more issue of hands length different, no more logo issue, no more date font issue. As far as I can see, there is no significant different face wise. And when all dial parts are tear down, you will see that all the detail are exactly copied as genuine :

Hand pinion are perfect, the gap between hands has no issue as well. All markers, and dial quality is really good. VS factory is just come with all these perfections.

Look at the dial, no flaws at all, exactly copied. If someone can spot a significant different, please let me know. Hands length and width are made perfectly as genuine. 

FRONT & BACK CRYSTAL

Scratch-proof sapphire crystal with colorless anti-reflection coating (Swiss standard, single-sided, same as genuine); Tinted case back crystal color as per genuine. That is the specification on this parts. Let see it in more details :

Anti reflective crystal are made perfectly as genuine, Crystal heights, no isse, colorless AR, no issue. It is just perfect from my poin of view.

Even still a little bit brighter, but on this version clearly see the upgrade, more tinted on back side crystal, not as bright as the other factory made. 

THE CASE & DIMENSION

This is why i called this version as the exact copy. From both side, the dimension is perfectly cloned, almost no significant issues on tis one. But if you see it carefuly, the case corner edge on VS factory version is slightly higher compare to genuine. But if you don't look at it carefuly, it's really un-noticable.

What a details, no more crownguard dimension issues and no lever issues on this version as some version from other factory, and as you can see all parts like screw is exactly the same with genuine.

THE MOVEMENT

While other factory are using A.7750 based on this replica, VS factory make it different. The movemen on this version is a custom designed Asian automatic movement to match the genuine Panerai P.9001 movement at 28800vph, same balance wheel position as genuine P.9001 movement.

You can judge it by yourself, the movement details is just perfect, very close to genuine. These are reflection of how this new factory VS made it with huge effort to make it better and closer. 

THE STRAP

Since the strap material is assolutemente leather, i can's see any different between VSF and genuine.

THE LUME

No issues at all on this parts. As VS are made it with Superlumed dial and hands (lumed with genuine Super-LumiNova); Flush Cannon Pinion as per genuine. It is just awesome.

NOW, WHAT ELSE? Grab this perfcet clone only in our store HERE



by DTIME International on 03 December 2016

Hi guys, 

After i did movement perspective review before, Now i want to make comparison between my new GMT Master BLNR Noob V7 super clone SA.3186, and my previous BLNR Noob V5 with A.2836 modified to close to Cal 3186. I ve lost my bracelet on my V5, so I put custom strap on my v5. When i look at it, pretty much there is no significant different on the case and dial physically, even on the movement look, there is no big different. But, there is huge different on the other part. Let's take a look.

THE FACE 



I can see that noob didn't do any upgrade on the dial, there is pretty much the same between V5 and V7. Font, datewheel, dial color, and bezel. Still the same. The bezel blue color issue still there existed. Bezel marker I consider there is no different between those 2 version.


No different at all, as noob claimed on V7 sub rehaut is improving. But i dont think on GMT Master V7.


Rolex logo on crystal is there, but i feel like on the v5 is very easy to spot compare to V7.

V7 crystal is a little bit lower compare to V5, but it is not significant things. I dont know weather this crystal height is the same with genuine or not, please somebody tell me.

CORRECT HAND STACK 


This is probably one of the reason why i stated as HUGE different between V7 and V5. If you remember V5 GMT hands position is at the bottom of hour hand while the gen is above hour hands. Now with V7, noob made it perfect by doing correction on GMT hands position, now exactly like genuine, above the hour hands. 

THE MOVEMENT

As we know that V5 are using Asian 2836 modified to be close to 3186 calibre, and the V7 are using Super Asian 3186 which is built from scratch to be close to genuine calibre 3186. However, the looks is not significantly different between these 2 version, you can see it on below pictures :





Eventho the engraving on the movement is a little bit better on V7, but i can't spot any significant different on the looks between these two version. But, I still wondering why noob still give double red gear instead of single. 

CROWN SETTING
This is the biggest flaw on this previous GMT BLNR. The date setting is very different compare to genuine, also the GMT hands setting as the opposite of date setting. Noob has made this biggest flaws disappear, because now the way the crown setting works is exactly the same with genuine version. You can see on below video, i made a comparison between these two models :

 

 

How about the reliability? Hmmm i am not sure of this, due to the fact that the first super clone 3135 are having big issues in the beginning. Hopefully this one is not. Will see.

LUME 



No doubt, no issue, all good on this part, as usual noob did well.

BUY THIS PERFECT TIMEPIECE ONLY IN OUR WEBSITE HERE

 



by DTIME International on 21 November 2016

Hi Guys,

Recently in November 2016, one of replica factory in China called G Factory (GF) has been release the newest model of A. Lange & Sohne Saxonia Moonphase with 384.026 model. G factory is probably the only factory that have its own pride to produce single brand with focus to develop to be better and closer to genuine. After successfully made Senator models, now GF attend to repeat its success to produce another revolutionary replica.

When you look at the previous Senator model, you will find how good and how detail this factory is. Now they try to make new model with complexity ; grande date and moonphase features. Making the date and moonphase displayed on the dial is quite easy for any factory, but making it all well function and real accurate, is probably one of hard part from some factory. But we think that GF is quite put extra effort to make it even better.

Let's take a look closer on dial parts and movement parts deeper

DIAL PERSPECTIVES

Look at all detail that GF did on this parts. Marker, date wheel, logo, date font, and the dial itself are perfectly made to be very close to genuine version. And it is perfect, probably you won't spot any flaws on this parts. Grande date (Large date) is working perfectly, the moving of the date is perfectly like genuine.

When you look at the moon phase decoration, you will see huge different compare to any replica with moonphase function. GF is not just put the regular moonphase parts in the market, but they made their own in order to be closer to genuine. It is different from others, and when you see the genuine one, it will be the same like what GF did. The full moon display, the stars, and half moon, is perfectly cloned.

 

MOVEMENT PERSPECTIVES

A. Lange & Sohne Caliber L086.5, beats at 21,600 vph, composed out of 325 parts, contains 40 Jewels & has an approximate power reserve of 72 hours. That is the genuine movement of this models. Therefore GF worked very hard to get close to this movement. With A.2824 based, they modified some parts to make all features worked well, and they did it. 

All decoration and details engravings on this parts are perfects. Look at it by yourself, there is not "cheapy" things you can see on this one, very detail and well finished. All engravings are well made.

This one, is probably the best replica on price range $300-$500. Perfectly well made, and almost flawless in every parts of this models. We are not inspecting other parts, because when the factory made all details on dial and movement, we assumed that that other "easier" parts will made perfectly aswell.

This one is very recommended for you, and the price is quite worthy to get this perfect one.

GET THIS PERFECT PIECE ONLY IN OUR WEBSITE



by DTIME International on 21 November 2016

Hi guys, welcome back to our blog. Couple weeks ago there is one factory in China relaesed the new Breitling Avenger Blackbird, which is : V1731110 on Nylon strap. First impression, is not too special, because it is all black, which I don't really like. But after a while, I was looking at it on details and i was amazed especially by tis dial. So perfect. On the other side, the material finshed is very nice. All engravings on back case is superb. Now, I am trying to make a light review of what I found the best on this piece.

DIAL & BEZEL

Generally i love the dial, textured like blasted sands on the dail patternt is just perfect. What I can see so far is perfection, all lettering, logo and marker are well made.There is no major flaws or errors that i can spot on the dial. Bezel itself I can say good, DLC finished on stainless steel is nice, also the bezel marker i think they all good. Clean, and neat. Lets have a look closer on the dial, i took some parts to allow you guys to see more details :

Who dare to say "very bad"? I think pretty much no one, or maybe some. But for me, it is just a perfect piece of replica made. Even the hands and the datewheel is also sand blasted, include the marker frame. It is just cool for me.

CASE & CRYSTAL

I am trying to take a bit zoom shot on this parts, I really love the crystal, it looks amazing. Let's have a look :

All looks great on this parts what i can spot. From the bezel engravings, also on the case back engravings. Very neat and well finished.

STRAP & BUCKLE

Nothing gonna talk much on this parts, but good enough from my perspective. I can only show you some pictures, you judge it your self. For me, when I wear it, there is no such issue on this parts :

Good enough, but it is really replacable with some custom genuine straps, might be great !

LUME

This parts is probably the best. The lume is no doubt, with very minimal light source will make a good result. With a price of $328, it's quite worthy....

GET THIS BEAST ONLY IN OUR WEBSITE



by DTIME International on 17 November 2016

Currently we have the newest GMT Master II V7 from Noob, with Super Asian 3186 Movement. This one i think it is quite revolution on this one. After a while being rumors, now I got it in my hands. I am not gonna do such review on this, but i just want to show how noob upgrade it. With the new super asian 3186, now all crown function and setting are the same with how genuine works, pretty impressive.

Lets have a look deeper on the dial and movement :



Its clearly correct handstack, the GMT hand over hour hand.








Perfect look, very nice and close to genuine. All function works as genuine. But i don't know about the reliability of this new asian movement. Hopefully it will not gonna be as worst as i was thinking.

BUY THIS PERFECT CLONE OF ROLEX ONLY IN OUR STORE
 



by DTIME International on 14 November 2016

Hi guys,

Today I wanna do quick review of probably the best omega replica in the market so far. All you know that noob had release the newest Liquid Metal 1984 ceramic dial, and unfortunately i only have the leather strap version (black & brown), but the bracelet is on waiting list to be deliver. When I look at it, it is really perfect, the ceramic dial is just awesome. Basically physical overall is perfect. 

I will just do picture compare between genuine and replica, also provide you some QC pictures of this beast.

FACE / DIAL 



Can you see how perfect this replica is? pretty much no flaws, especially the ceramic dial and bezel are absolutely perfect. Marker and fonts is also no issue, i think on this one, noob really put his eyes on it. The only noticeable thing is the end second hands color. It is just different with genuine, on genuine it is red while noob make it orange. See the picture below :



Below are some QC pictures of dial and face parts of this replica :



CASE, INSERT & CRYSTAL


Did you find something bad on this parts?. From my point of view is none !. all done perfectly, very detail. The crystal is so nice. I don't know weather this is the same with genuine or not, please somebody tell me. But i just like this part.


Crystal height i think is fine, and also the case thickness i dont think there is any big issue compare to gen

CASEBACK


Nothing special on this one, even if the replica probably have a bit flat sea horse logo, but the rest is very detail. And also one thing, when I wear it, there is nothing bad caused by this engravings. All well finished.

Below are some QC pictures of back case parts :

 LUME


I was thinking that is a big flaws on this parts. Because I saw it all blue color instead of blue and greenish on the minute hands and pearl. But when i look at on genuine, it is clearly answered that the lume is exactly match with the genuine. The brightness and the blue color is super match with genuine.

GET THIS BEAST ONLY IN OUR STORE HERE



by DTIME International on 28 October 2016

Hi guys, i just want to make a quick review on one of Omega 2016 collection. 215.23.46.51.03.001 Seamaster Two Tone Blue Dial.

Overall I think it is pretty much perfect on my opinion. Well built and nice finished. All the detail are perfect to me except the sub dial chronograph function, which you can't expect anything of it. I have some QC pics to show you guys :

DIAL AND INSERT 






I think there is no major flaws on di dial. I am not gonna talk about the detail of color, marker etc. But on right sub dial (minute & hour) is not working as genuine. Only minute counter hands working and could be reset to 0 when you stop the stopwatch. But I think I shouldn't complain on this, because the movement of this replica is a7750 which required 3 sub dial to make all working. When Omega make 2 dials together in 1, only 1 can be function well. The rest i will say very nice and perfectly cloned.

CASE & CRYSTAL





The case finished of 316L stainless steel with gold plated combination on the bezel ring and buttons is very nice finished. The only flaws I spot is on the cyrstal thickness. Too thick compare to genuine version. 

CASEBACK & MOVEMENT



Omega Calibre 9900 was cloned perfectly, the decoration is nice, all details are there as genuine. but again, the crystal on caseback is still too thick.



You can spot there are 3 engravings at the back of the lug. Those are the same with genuine, it is just so detail how JH made it.

THE STRAP & BUCKLE




The material of the strap is rubberized leather. I feel very comfortable when i touch and wear it, smooth, and flexible. They made it on this one. I have no issue with buckle and clasp. All good.

What do you think, guys? 

GRAB THIS PERFECT REPLICA ONLY IN OUR STORE HERE
 



by DTIME International on 26 October 2016

Today I am going to bring you a review on this huge piece – Replica Hublot King Power 4000m. This black and cool watch looks very strong specially when I hold it in my hand. As strong it is, not everyone can handle this huge watch, I think this is for those strong and sport guys. Strengths of this watch including new strong material, diving timing function and supper big case. Let’s have a look at this fantastic watch.

It is well-know that Hublot is good at using high-tech and new material. This large diving watch has a 48mm case, and the parts with patterns I can see is made of new forge carbon fiber material which is 8 times stronger than solid stainless steel. On the black dial, markers and needles are superlumed, which is a basic function for a diving watch. Come to the right side, there are two buttons, one is protected with a bridge and this is for adjust the timing while diving. The one below is for adjusting the time. Both of two buttons are screw in type. The protective bridge is made of rubber, and the buttons are made of metal with PVD coating. The front glass is made of sapphire crystal. Inside its strong case, there is an Asian 7750 movement, very accurate and steady working heart. This ensures it can work as good as per original watch.

The back case is sealed and waterproof, and there is engraving logo and information on it. The bracelet is made of rubber, matching the carbon case perfectly. The bracelet can be moved easily and change it if necessary. On the bracelet, there is Hublot’s name and logo, looks nice. The clasp is a adjustable one just as other sport watch. And, the waterproof function should not be worried about. As I said at the first, this watch is not a right one for anyone, this watch would be a favorite watch for those strong and sport guys. If you love sport watches, don’t miss it.

Replica Hublot King Power 4000M

Replica Hublot King Power Carbon Fiber

Replica Hublot King Power 731.QX.1140.RX

Replica Hublot Diver 4000m Crown

Replica Hublot King Power Case Profile

Replica Hublot King Power Diver 4000

Replica Hublot King Power 4000m Caseback

Hublot King Power Diver 4000m Replica Watch

FIND THIS PERFECT REPLICA ONLY IN OUR STORE HERE



by DTIME International on 14 October 2016

Hi Guys, welcome back to our blog. Today I wanna show you custom design replica watches, Rolex Milgauss Bamford Edtion, with DLC engraved on case and bracelet. The reason i do review on this, is just because i found these pieces is very interesting and very artistic. This is not factory made replica, this is custom engraved with nice finished i think, and the price is quite OK. Let's have a look !

This engraved milgauss is not special order, one of watchsmith made it to sell. He made 3 models for this Milgauss with the same engravings style and strap options :

  • Milgauss Bamford Green marker
  • Milgauss Bamford White marker
  • Milgauss With Explorer Dial

Those 3 models come with engraved bracelet or vintage genuine leather strap. Let see those on pictures :

Bottom line, i see these as a good art. And quality wise also quite good, well finished also the leather straps is nice. The movement is just ordinary movement with A.2834, but I think that is enough since this Milgauss have no date and complicated features.

PRICE ?

  • On engraved bracelet is $388 (exclude shipping fee)
  • On genuine vintage leather strap $358 (exclude shipping fee)
  • If you want both bracelet and leather is $438 (exclude shipping fee)

All of these collections are ready to ship, you don't need to wait for engravings process unless you want to make other watch engraved or make different engraves pattern. 

We are not put these on our website, because the stock is limited, contact us to order this great collections HERE

 



by DTIME International on 11 October 2016

Rolex GMT Master II Replica Wrist Shot

GMT Master II is a popular series of Rolex, it has a rich history and many people who usually travel around the world buy Rolex GMT Master II, the two tone bezel of GMT Master makes it stand out among all GMT watches. The bezel of Rolex GMT Master II has several styles, such as Blue/Red, Blue/Black, Red/Black etc. Because of these bezels, Rolex GMT Master II also has other names, like Coca Cola and Pepsi. A lot of Rolex fans still do not know what is Pepsi or Cola bezel, before going to introduce this replica GMT Master II 116719, I will help you clarify the two types of bezels.

Rolex GMT Master II Replica Blue Red

Rolex GMT Master II 116719-BLRO Replica

Pepsi is red and ble bezel used on GMT Master 1675, 16700, 16710. Coca Cola bezel is red and black bezel used on GMT 16700, 16760, 16710. You will have a clear definition of the two types of bezels as long as you think the color of the two canned soft drinks.

Rolex GMT Master II Blue Red Bezel

About the watch here I am going to review, it is a superior replica, which is made by Noob factory. It is imitated according to genuine because Noob bought a genuine 116719 GMT and researched it, the factory used the same material as genuine, the functions of the replica are 100% the same as original, it is a perfect replica. The movement inside the replica is Asian Clone 3186, actually it could be also equipped with Asian ETA 2836 or real ETA 2836 movement. Absolutely the best one is with genuine ETA 2836.

Rolex 116719-BLRO Crown

Rolex 116719-BLRO Case Profile

Whole replica watch is made of 316L stainless steel, except ceramic material on Pepsi bezel, it is real ceramic, blue and red color are natural, bezel engravings have a certain depth. The red part bezel just matches with the red GMT hand on the dial. Brushed finishing on case and bracelet, well processed case and bracelet edges so that they are smooth and will not scratch your hand, I wore this watch several days, it is really very comfortable.

Rolex 116719-BLRO Bracelet

The dial is highly readable because white silver hour markers and hands are on black background. Those markers and hands are applied white lumimous material, they will emit strong light in the dark.

Rolex 116719-BLRO Clasp

In a word, the first feeling when you get this replica Rolex GMT Master II Pepsi watch on hand is it is very heavy and gives you a genuine feeling.

Rolex 116719-BLRO Clasp Engraving

This watch is really nice finished, probably one of best choice for you. I know, the gen one is using white gold, but i don't think will be the issue for you who really love this "Pepsi"

GET THE BEST ROLEX PEPSI REPLICA ONLY IN OUR STORE



by DTIME International on 11 October 2016

It seems Rolex is another name of watch, and it has a great reputation and popularity in watch market. But, I think Rolex watch is a good option for man in a age range of above 30. This replica Rolex Yacht-Master 116622 with a 40mm grey dial is a wonderful choice for those man who has a career. Or, for those who want to be professional at business occasions, Rolex Yacht-Master would be a right option. Actually, when we are talking about Rolex watch would remind me of George Clooney, he is a such a perfect guy as spokesman of Rolex watch. On this point, I think I am not alone.

Replica Rolex Yacht-Master 116622 in grey looks not as bright as another model with a ocean blue dial, many people would still like it. The sapphire crystal glass matches the stainless steel belt well, and these two materials make it a good one for normal occasions, and of course, wearing suits. What’s more, the luminous dial is classic and useful which follows the Yacht-Master Perpetual Date series.

Choosing a Rolex watch won’t be wrong due to its design and function. We can have both of them from a replica Rolex Yacht-Master watch. And the Swiss made 2824 movement completes it a mechanical watch well, as this movement is working stable and well in replicas. Some people don’t like leather belt much because it is easy to spoiled and has to be careful with water, stainless steel won’t bother you much. Replica Yacht-Master 116622 watch is not a very outstanding watch but certainly it will help you build a mature, professional and good-taste impression for others.

The exquisite manufacture and super movement enhances Replica Rolex Yacht-Master watch. It is not a surprising one but it won’t never be a wrong one, and the inspiration from the yacht and ocean makes it kind of sporty too. I think this replica Rolex does well represent for this brand’s culture, style and ideology.

Replica Rolex Yacht-Master 116622

Replica Rolex YachtMaster Grey Watch

Rolex YachtMaster 116622 Grey Dial

116622 40mm

116622 Crown

116622 Case Side

116622 Back

Rolex 116622 Buckle

Rolex 116622 Clasp

GET THIS PERFECT ROLEX REPLICA ONLY IN OUR STORE 



by DTIME International on 02 October 2016

IWC Mark XVIII Replica

Military watches are always welcomed in watch market, especially the Pilot watch from IWC. This Top Gun Miramar belongs to IWC Pilot series, it is the latest model of Mark XVIII that was published in 2016 SIHH. The watch inherits the original features of previous Top Gun Miramar – highly readable dial design and nylon strap. Genuine watch is equipped with a better movement that has a reinforced power reserve. Now, the replica here will be discussed is just made according to a genuine Mark XVII watch by MK factory. It consinues the high quality feature of former IWC Mark series replica watches made by this factory.

IWC Mark XVIII Ceramic Case

IWC Mark XVIII Black Dial

The replica case is not complex, it is just one complete real ceramic piece. The diameter is measured to be 41mm. Black case color makes the replica look calm and stable, actually a lot of Pilot Top Gun watches uses ceramic case. Steel crown is big, it is screwed down with a long tube, the crown has refined engravings, which are clear to read. Case back is brushed stainless steel, it has six grooves for the user to open the back with special tool. The unique engravings on the centre tell everything you want to know more about this replica watch.

IWC Mark XVIII Crown

Black dial echoes with black ceramic case, the white markers, hands and dial printings increase readability to the replica. The dial design of Top Gun Miramar is too different from other IWC watches, the red circle is for users to read hours, these white Arabic numbers like 5, 10 are displaying minutes, while the most outer white markers are for seconds display. There is a small square date window positioned at 3:00 lying on the red circle. To increase visibility, the white date font is in black background.

IWC Top Gun Miramar Case Back

If you have ever bought one IWC Mark replica, you will know the best one is equipped with a ETA 2892 movement, so is this Mark XVIII. Other versions are not as stable as this one. The band also offer wearer the greatest satisfaction, because the outer material is nylon while the inner lining is black leather, there are some mysterious words on the leather lining like “BTAI” and “BTAN”, could someone here tell me the meaning of these words?

IWC Steel Buckle

*Thanks to Susan for the review

FIND THIS PERFECT COPY PIECE ON OUR WEBSITE HERE



by DTIME International on 30 September 2016

Hi Guys,

Welcome back to our blog. Today I will do review on one of modified watch made by one of expert on this area. This watch is : Audemars Piguet 25940SK Rubber Clad White Dial. This is not only modified, but also replace some replica parts with genuine after market parts to be closer to genuine version.

Before I go to my review, I just want to show you some regular flaws on factory made replica of Audemars Piguet ROO Chronograph. You will find pretty much the same issue on every models. Those are :

  • Cyclops is not magnifying exactly as genuine, therefore the font looks smaller compare to genuine
  • Datewheel edge color on replica is white, instead of Black on genuine
  • Font type and size is smaller on replica compare to genuine
  • Gap between datewheel and tachymeter ring is very tight on replica, while in genuine there is significant gap between
  • Bezel screw on replica is too flat on the edge. While the genuine on this model is rounded on screw edge. Also need be repolished to catch the shine of white gold on genuine
  • Hand pinion is too big on replica

Another major flaws is the thickness and crown position :

  • Crown position need to be lower, and the crown guard shape is a bit different.
  • The thickness of the back case is very noticable. Replica has thicker caseback compare to genuine. This is hard situation for factory, since this chronograph AP are using Asian 7750 which required thicker case. If not, the rotor will be stuck.

 

SO, WHAT IS THE SOLUTION ON THIS?

All watch smith and modder around the world are keep working on how to get the factory made replica become more closer to genuine. Usually there are 3 options to make it closer to genuine version :

  • LOW BUDGET MODIFICATION : Light modification on bezel screw, datewheel replaced to ETA DW, re-shave the tachymeter ring to make a little bit gap with datewheel.
  • MEDIUM BUDGET MODIFICATION : Do exactly like on the first point with adding some re-shaving on hand pinion, re-shaving on cyclops, and re-positioning the crown a little bit lower
  • HIGH BUDGET MODIFICATION / FRANKEN : The thickness is the only thing that can not be moddified. The solution is only by changing the movement with thinner movement. The options, is only with genuine movement, usually LWO 283. Also some parts like dial and tachymeter can be replaced with genuine. It is really depend on what you want.

 

WHAT IS THE RESULT ?

What watch smith did on this AP Rubber Clad are :

  • Gen dial and tachy ring.
  • LWO283 movement
  • Edge gen specs Datewheel
  • Gen specs hands (the pinion is not too big)
  • Double AR Crystal
  • Brand new Rubberclad Black Theme replica Noob factory
  • Rep case shaved to gen thickness and modded to gen specs  
  • Re-lume to make closer lume to genuine

You can compare this franken with genuine like picture below :

You can see above picture. Very clear that almost no issues or flaws on dial perspective. Below are some quality pictures of the franken we got right now :

How about the thickness?. Because we already change it with genuine LWO 283 movement, so the watch smith can do re-shaving on the caseback become thinner. You can compare with the replica factory made on below picture :

Besides the thickness, crown position is also need to move lower, also the crown guard after re-shaving, now very close to genuine. See actual picures from the side :

The only thing we do on caseback is make the engravings deeper, so it will look closer to genuine.

We provide you video on this franken :

 

WHAT ABOUT THE PRICE?

This is the best part of this review. Since some genuine parts are installed on this franken, the concequences is to the price. We need to pay so expansive to do this kind of project. we spend almost USD 4,000 for this. It is not cheap price, but when you look at the result, you will decide weather it is worthed or not. 

Below is genuine price :

USD 4000 VS USD 13,995. Is that worthed? You decide, our job is to give you more options of having a good replica.

GET THIS PERFECT FRANKEN PIECE ONLY IN OUR STORE

 



by DTIME International on 29 September 2016

Replica Rolex Submariner 116610LV Green Watch

It is said that, about 60% of Chinese will choose Rolex if they are going to buy a superior wrist watch. Without exception, each corner all over the world also has a lot of fans like Rolex so much. Rolex Submariner was used for professional diving, and it also was a symbolic watch for diver. But it was rather difficult to afford the high price of original when we have limited budget. Therefore, today I am so happy to recommend a top-level replica, Rolex Submariner 116610LV green watch to you guys. All parts are interchangeable with genuine. And it was a classic and representative series. Its perfect performance has convinced the deep sea world, its glamorousness was around our land. When diving in deep sea, it was the best partner for professional diver. When exploring land, it also has wonderful and brave performance. Due to these advantages, it was liked by watch fans who with deep insight. Now I can not wait to tell you about its details.

Replica Rolex Submariner 116610LV Green Dial

First, This replica has an oversize case that was made of brushed stainless steel. Its diameter was 40.5mm, and 13mm in thickness. Through sapphire crystal, we can see its clear and delicate dial, which is green. Correspondingly, tts bezel is also in green and made of ceramic, this main tone made this wrist watch eye-catching. Actually, green dial was hard to handle for most of us, but it was deserved to collect for someone who is pursuing for fashion and stylish design. In order to give a good readability, its dot markers and needles feature blue super lume coating, so it was so awesome to have such unique lume that is rare among replica watches in the market. And you can get time information easily even you stay in darkness. Its dial is very simple. Its markers was the combination of dot, long strip at 9:00 and 6:00, triangle at 12:00. And date indicator set in the palace of three o’clock. This date window was made of convex lens which can help wearer observe date clearly and conveniently when they are diving or doing sports.

Replica Rolex Submariner 116610LV Green Bezel

Second, when talking about its bezel, it was a ceramic sandwich numeral bezel exactly, also with blue lume pear dot. Above this uni-directional bezel, it has engraved minute scales, which was convenient for diver to record time .

Replica Rolex Submariner 116610LV Solid Case Back

Third, the bracelet was concert with its steel case. It was made of brushed stainless steel with new style oyster and matched with correct new Rolesor clap. And for provide more practical function to diver, it also features diver extension.

Blacken Rolex Clasp Engraving

The replica has a good water resistance performance, its solid case really played an important role in such practical capability. It made the replica with the function of corrosion resistance and get rid of strong hit from outside. In addition, we can appreciate its hologram at the same time. This replica is equipped with Nickle Plated Asian Eta 2836-2 Automatic Movement, which can provide precise and reliable time. And because it was automatic movement, can help you out of some trouble, you just need to wear eight hours everyday at least so that it could supply enough power reserve.

Replica Rolex Submariner 116610LV Movement Test

I think this replica with stylish design and was so creative in details. I hope you will like it, and I suggest that you can take this replica instead of the genuine since it really with reasonable price and can satisfy your special requirement at the same time.

 

Collect Rolex Submariner 116610 LV Green Ceramic Newest Noob V7 Best Edition on Stainless Steel Bracelet 

See other Collection here



by DTIME International on 27 September 2016

Replica Hublot Black Cavair

If you are one member of watch fans, I think you may have heard about Big Bang Caviar of Hublot, due to its unique symbolic design that has set shocking price, one million dollar. And Black Caviar was so hot in fashion world. Yes, Today I am going to recommend an excellent Hublot Black Caviar replica, which can realize your dream that owning one of these wrist watch with high reputation.

See more Hublot Black Caviar replica

Hublot Black Cavair Ceramic

This replica Hublot used black color as its main tone. It was briefer and clearer with this secret color. Now let’s explore its secret color. Actually, Even though this replica with low-key style as a whole, I think it still can not hide its gorgeous brightness. No matter judge from its design of detail or its function.

Hublot Black Cavair Black Dial

Firstly, Using ceramic as main material was its obvious characteristic. Its diameter was 42mm, and with thickness 13.5mm, this big size case revealed its fashion and mechanical appearance more effective. Its case was made of black ceramic, which with the same construction as genuine exactly. As we all known, ceramic was a kind of perfect material in watchmaking. It was lighter than steel about 30%. Besides, it can be anti-wear, anti-allergy, anti-rust. And its dial was made of real black ceramic with genuine quality. In addition, it was made by OEM makers for genuine Swiss brands. So these factors may be as strong persuasion to insure has good quality as original. Its checkered dial was so special since it has gone through the process of inlaying with the way of making diamond. So what was showing in front of us was that it has been arranged neatly, which liked caviar, shinning its brightness no matter which angle we observe. It also revealed delicate design on the other way. Secondly, its bezel also used the same material, black ceramic. And has inherited its created style of Hublot, it was fixed by six pieces screws with the shape of “H”. The fire-new screwy crown was covered by natural rubber, that’s an important character deserved to mention. Its sapphire crystal with colorless double sided AR coating , which can ensure to read time easily without any outside effect . The date display window was set in the place of three o’clock, you can adjust via crown. It was so convenient. Thirdly, Its anti dust black rubber strap also its special characteristic. Its strap has been concern with its whole tone. yes, secret black. It can make wearer feel more comfortable and it was more durable, really revealed its charming in every detail.

Hublot Black Cavair Black Rubber

Finally, Through its transparent case back, we can appreciated its outstanding craftsmanship clearly and feel the unique beauty of mechanical wrist watch. And we can see some detail engraving at the same time. This replica equipped with Swiss Eta 2824-2 Automatic Movement, which can have a good performance to provide precise time.

Hublot Swiss ETA 2824

When we hear the name of “Big Bang”, I think you has been shocked, but it may not make you feel disappointed, because this replica watch is really with high quality and charming appearance. I think it deserve your affection.

Hublot Swiss Movement Test

 

Collect  Hublot Black Caviar replica



by DTIME International on 27 September 2016

Cartier Calibre Replica

When talking about the world famous watch brand Cartier, maybe it has all kinds of charming and elegant ladies wrist watch in most of our impression. But we can not ignore some classic series of men watch. Today I am going to recommend an excellent replica, it was basic on the original one, Calibre de Cartier. After you know something about its detail, I think you may like it without any hesitation.

See more about this Calibre de Cartier HERE

Cartier Brushed Case

This replica with smooth lines, strong case, unique structure as a whole. It was so confident to reveal masculine characteristic of man.

Calibre De Cartier White

This replica Cartier watch features a case which was made of solid stainless steel, it has been gone through the process of polishing. It was so hard to resistant huge hit from outside. Besides, with gloss at the same time. Through the synthetic sapphire, We can see that there are seven Roman numeral markers distribute in white dial steadily.

Cartier Calibre Black Leather Strap

Especially the marker set at twelve o’clock position. It was the biggest one among all the markers, which was so attractive that can be easier to get time information. The sword-shaped hands were moving along with the sub-dial which was set in the place of six o’clock. The date display window was bigger than other designs, it has three clear numbers showing to us. And the triangle pointed today’s date. Its design of dial was simple without any complicated decoration. But its main motivation was to provide a good time information to you.

Cartier ETA 2813 Movement

Matching with a leather strap, which would be more comfortable in tough feeling. Along with a insignia deployant buckle.

Cartier ETA Movement Test

Through its transparent case back, we can observe the beauty of movement. And has detail engraving on case rims. It equipped with Asia 2813 Automatic Movement, has plated with nickle. Besides , it has 21 pieces jewelry surround in the movement. With such powerful movement, you don’t need to worry about the problem that it really has effective performance or not. Because I am sure to tell you that it can provide accurate time.

With brief and masculine style, this high quality Cartier Calibre replica was really a good choice because it was suitable for daily wearing actually. I can satisfy your basic requirement of wrist watch. The most important point is that its price is so cheap compare with the original but with the similar appearance and function.

 

See more about this Calibre de Cartier HERE



by DTIME International on 26 September 2016

Replica Hublot Big Bang

Nowadays, wrist watch was not just a tool for time only, it was a goods to reflect our personality. Therefore, a wrist watch can reflect your style, taste and attitude of life. Today I am going to recommend a nice replica, which based on the genuine of Hublot Big Bang series. It is exaggeration to say, it is prepared for someone who would like to express themselves with stylish idea, and is full of young, fashion attitude for life. It was a good reflection of its name “Big Bang”, which can be your good partner on the way of success.

See more Hublot Big Bang Valjoux 7750 Black Ceramic 

Replica Hublot Black Dial

Compared with the other traditional Swiss luxurious wrist watch, this replica with an enthusiastic taste since its stylish and unique appearance instead of the traditional shape. It announced its outstanding taste and special sight bravely through its creative design which was almost the same as the genuine.

Replica Hublot Ceramic Bezel

This Hublot Big Bang replica can bring us a enjoyable visual experiment due to its unique appearance. Actually, the striking characteristic of this replica was its mixed material. Different types of material was integrated concertedly. For example, It has composite case which has contained three kinds of material. Including stainless steel, rubber and caviar, Which can be distinguished with the other watch brands. Besides, its dial was made of carbon fiber. The design of dial was rather simple but really filled with modern feeling. Matched with super big steel hands, Arabic numerals with mixed markers, scales. It was so clear to read time in such ultra big black dial because its diameter was 44.5mm. Let’s observed it carefully, the red second hand was rather vivid due to it has added active taste to the dial which used black as main tone. Three sub-dials was distributed at 3:00, 6:00, 9:00 position respectively. And the date display window was set in the palace of 4:30. You can adjust it through crown.

Hublot Black Rubber Strap

This replica also with classic unique characteristic. Look at its bezel, it was made of ceramic which has gone through the process of polishing. It can be wear resistant effectively. The bezel was fixed by six screws, it was more striking to leave us a deep impression, and also has revealed its stylish character. The screws were not only a tool for decoration, but also a key component to keep the sandwich structure being stable. The elegant lines of this replica make it more masculine as a whole.

Hublot Valjoux 7750 Movement

In order to be stylish, without exception, its strap was also special. It was made of rubber with anti dust quality. Besides, it with PVD black coating and tyre design. Such strap was really considerate. This replica was very dazzle and cool with this collocation.

Hublot Movement Test

Except its attractive appearance, its capability was also so powerful. It equipped with Asian 7750 Valjoux Working Chronograph movement. For one thing, it can ensure to be accurate in travel time, for another thing, it can be shock resistant since its high beat was 28800bph. In addition, it also with the function of chronograph, you can set it via the button on the side of case. We are living in a age which everyone is eager to express themselves deeply. For anther word, everyone would like to be stylish. The Hublot replica can satisfy your requirement due to its cool design which has broken through old traditional design. I think it is a good choice to help you highlight your own personality.

Collect Hublot Big Bang Valjoux 7750 Black Ceramic 



by DTIME International on 20 September 2016

Audemars Piguet Royal Oak Replica

A fresh sport wrist watch that can catch the eyes of others is a kind of necessary decoration for men. I believe it may be the baby which every men are looking forward to own one of them. I understand your real thought deeply, so I am going to introduce one exquisite replica, its name is replica Audemars Piguet Royal Oak 15400, It really can show the side of sunshine and strong energy for men. This replica didn’t limited in the regular rules in design, It replays the elements of royal family with secrete. Maybe that is the main reason why so many people like it so much nowadays. You also can not miss it . Now let’s know something about its details.

Audemars Piguet Royal Oak Rose Gold

First of all, This nice Audemars Piguet replica has two size offer to you. This size of 37mm will be more delicate. And the anther size of 41mm will be clearer with big dial. To the men who like to choose a wrist watch as one part of their collocation, this replica is really a good choice since its thickness only has 9.8mm, which is almost a super thin model with fluent line. It uses PVD rose gold and stainless steel as the material of case and with sapphire crystal, that can make it have strong wear-resistance. And its nice appearance can make men looked so cool and stylish in daily collocation. Its dial brings us a concave-convex feeling in the whole vision since it with the shape of checker. It is full of tactile feeling that we feel surprised and want to touch it. In addition,the octagonal design make it clearer in boundary.

When talking about its dial, it also has one unique characteristic I need to mention, it is made of blue fiber and has green luminous at night, it is really convenient for us. After knowing the skillful design of this replica, I only have one word to express my whole feeling, it is awesome.

AP Rose Gold Crown

 

About its movement, it high replicas AP 3120, basic on imported MIYOTA 9015, its vibrational frequency is 28800bph, has large improvement in the ability of travel time with such powerful movement. It may be more stable and continuous in travel time. What’s more, It is more convenient to have the display of date in the dial.

AP Clone 3120 Movement

In order to improve its wear-resistance as a whole, its band also uses 316L stainless steel as material, it is united in the using of material Considering of men have different need with various collocation, it has two kind of bands you can choose, You can choose stainless steel or leather as you like, cowhide and alligator is available. It can be more flexible in daily dressing.It also has the function of water-resistance, near 50 meters, almost satisfy your daily activities.

Audemars Piguet Full Rose Gold Bracelet

AP RG Clasp

 

Wow, You see, the hour,minute, second hand is moving flexibly and with independent clear date display, having good performance in wear-resistance and water-resistance, this Audemars Piguet Royal Oak replica almost owning all superior advantages. I don’t believe that you can reject such amazing attraction. No matter you are in any occasions, you need to wear a wrist watch which with bright shape and useful capability. So which one is your best choice? Yes, that’s it.

Audemars Piguet 15400 Dial Lume

 

Audemars Piguet Royal Oak 15400 41mm 18K Rosegold Case JF 1:1 New Verison Black Dial on Rosegold Bracelet A3120

Audemars Piguet Royal Oak Collection



by DTIME International on 20 September 2016

Audemars Piguet MICHAEL SCHUMACHER Replica

Audemars Piguet Black Ceramic Bezel

Nowadays, A lot of men will focus on Audemars Piguet naturally when they are choosing an Automatic wrist watch for themselves. In order to satisfy what you like most and consider from the most realistic standard, I am going to introduce one perfect replica Audemars Piguet MICHAEL SCHUMACHER limited edition, which is almost ninety nine percent similar with the original, but no need you cost hundreds of thousands of to own one original. I think most of clients will prefer to choose one high replica with reasonable price rather than to have the original with high price almost can not afford.

AP Logo on Crown

This replica is almost perfect in workmanship, its handsome appearance and cool style may be a special view that can be your new baby .Firstly, we find that it with stainless steel case, with such hard case can be strong protection. With super big size 44mm, and the black-gray dial decorate with famous “Mega Tapisserie”, which is one kind of super large checkers decoration. When we see it carefully, We find that there are two blue stars and five red stars stand by in the place of twelve o’clock and one o’clock, this is really a unique details in design, but it is a meaningful symbol. As we all known, this is related to its design inspiration. It is in memory of one famous racing driver Michael Schumacher, these stars symbolized that he was champion in seven important competitions. It is liked an art to combined with competition and wrist watch together skillfully in design.

AP Rose Gold Case

In addition, this replica uses black and white pattern as decoration in minute scale, which can remind the design of checkers flag. The calculagraph hands and date display decorate with red color, can easier to recognize time. Its bezel uses ceramic metal, which can be harder about seven times than stainless steel, and fixed with eight nuts liked the style of car. What’s more, it equips with black rubber strap, all these design, reveals the side of toughness for men.

AP Clone 3126 Movement

When we turn back the replica, we can see its back-case with simple design, the ring of outside was inspired by racing. Through the sapphire crystal, we can see its best replica movement, which is clone CAL 3126, basic on Asia 7750 25J Automatic chronograph movement, its power is same the original to have good performance in travel time. It also decorates with the symbol of AP and a famous signature from Michael Schumacher, uses his short name “MS”. When talking about its crystal, you can not look down upon, it is not normal, which is anti-reflective coating, can be scratch-resistant. And this replica with 50 meters for water resistance ,can satisfy your daily activities.

AP Rose Gold Buckle

After you have known something about its special designs in details, have you be attracted by such cool replica, do you want to show your side of sunshine through the decoration of wrist watch. Trust me,thisreplica Audemars Piguet is your nice choice, ninety nine percent similar with the original in appearance and capability. It deserves you owning one of them.

AP Green Lume

Collect Audemars Piguet Royal Oak Offshore 44mm Rosegold Cermet Bezel Michael Schumacher 1:1 JF Best Edition A3126

Collection of Audemars Piguet



by DTIME International on 18 September 2016

 

Vacheron Constantin Malte Replica

Most world-famous watch brands always want to reveal its powerful ability through tourbillon, it can highlight the structure of brand perfectly. To wearers, such delicate wrist watch was full of strong attraction. I think all of watch fans has realized that tourbillon was so expensive since it played an important role in keeping precise time. Therefore, You may have the ideal that owning such magic tourbillon wrist watch with competitive price. Consider of this confusion, today I am going to recommend a delicate replica Vacheron Constantin Malte, the series of Malte, its Ref NO is NO30130/000R-9754, it was a tourbillon wrist watch, and was the top-lever replica. I think it was a good choice to owning a wrist watch with skillful craftsmanship but just cost less money.

Vacheron Constantin Malte Crown

This replica with deep taste of classic and retro style as a whole, which was very popular so far. First of all, its size was 48mm, if without containing the size of two lugs, its size was 42mm. It with long dial but its shape was not regular. Owning the tonneau appearance, may make a deep expression.

VC Case Side

When we observed its dial, it was so delicate. In order to be simple and clear in vision,it has cancel second hand. Its case was made of 316l stainless steel, which was so firm as a good protection to get rid of suffering from damage. I was so appreciated the design of its scale. The palace of twelve o’clock with slender Roman numeral. And the other scales used the line-shape, matching with the diamond-shaped hands, already created the feeling of noble. The black tourbillon device was set in the palace of six o’clock. Besides, it collocated with white dial, which was so distinct connected with these two color, and it was a great inflation between simple and complicated. Therefore, it created new energy in visual effect.

Vacheron Constantin Tourbillon Movement

In order to have a good touch feeling, this replica used superior America alligator strap, no matter its obverse or the reverse, all were made of real alligator strap. When your are wearing this replica tourbillon watch, you make feel so comfortable, and also showing the feeling of noble as a whole.

Vacheron Constantin Malte Clasp

Through its transparent crystal ,which was made of scratch-proof sapphire crystal, we can appreciate its movement clearly. We may feel amazing for its outstanding craftsmanship. It used Asia Sea-gull automatic tourbillon movement, which has polished so smooth, it can insure you have precise travel time. In addition, it can be water-resistant, and satisfy most activities in your daily life.

Anyway, this replica contained the key capability and with same appearance, its price also rather acceptable when compared with the original. I think it was necessary to consider such tourbillon wrist watch.

SEE MORE OUR VACHERON CONSTANTIN

(Susan Review on Replica watch)



by DTIME International on 18 September 2016

Audemars Piguet Ember Diver Replica

Blue sky and sea was unique view in summer this enthusiastic season, I believe that you may be eager to explore the glamour of sea and enjoy a wonderful diving experiment. Today I am so happy to recommend an outstanding replica Audemars Piguet Royal Oak Diver watch, it with fashion and sport taste, powerful capability as genuine. It may make your sea journey more smooth. This replica with a case which was made of stainless steel 316, has covered DLC black coating. It was really a reliable and practical wrist watch. Because this replica really provide more practical capability with cool appearance. With this material in case, it can be wear-resistant, and with the function of anti-corrosion. So it was more useful in diving environment. In addition, this replica inherited the classic design of Audemars Piguet, which with octagonal case. Its DLC black coated bezel was fixed by eight hexagonal screws. In addition, the uni-directional inner diver bezel operated by the rubber cladded crown at 10:00, such considerate design can make it play an effective role in chronograph. Its diameter was 42mm and 13mm in thickness, which was a reasonable size as diving wrist watch.

Audemars Piguet Diver PVD Black

Through its sapphire crystal glass, we can admire its cool dial. I think you may have the same feeling with me. Yes, absolutely, this replica can provide a clear view to read time through some detail. It was so special with black ember checkered dial, wider hands, the red second hand has caught our eyes at the first view. Its inner bezel has printed several of Arabic minute scale figures. What’s more,it has super lume sticks hour indexes. Its sapphire crystal with colorless AR as genuine. So no matter where you stay, you can read time easily, especially in dark deep sea, you still can get time information immediately without any outside affection. It has set date indicator in the palace of three o’clock with correct magnification. Just want to provide easy-read dial to wearer.

Audemars Piguet Ember Dial

When talking about its strap, this replica also was so considerate. For one thing, it would be more comfortable with leather strap. For another thing, it used black color and has red stitches with insignia clasp. Because this replica took black color as its whole tone, the black strap was responded with its black dial. In addition, its red stitches was in concert with its second hand.

Audemars Piguet Black Leather Strap

Under its closed case back, the replica Audemars Piguet Ember watch is equipped with Nickle Plated Asian Eta 2824-2 Automatic Movement, its high beat was 28800bph, with anti-magnetic cover as well. With this movement, it can ensure has precise time and it was safer with these practical function. In the back case, we also can appreciate its detail engraving and serial detail. It also engraved individual serial numbers in case back.

Audemars Piguet Solid Case Back

With the cool and noble appearance, powerful capability, it was really the best choice as diving chronograph wrist watch. Do you want to have a enjoyable exploration under the deep sea, let’s bring it together.

Audemars Piguet Movement Test

SEE MORE OUR AUDEMARS PIGUET REPLICA COLLECTION HERE



by DTIME International on 15 September 2016

Formula 1 Monaco Grand Prix is one of the most famous and prestigious races in the F1 calendar. Even those who have never followed motorsports have heard of Monaco (maybe because of Tag Heuer ), a highly technical course which winds through the roadways of the famed city-state and playground for the rich and famous. The Monaco GP, now in its 83rd year, highlights prestige, luxury and wealth in a way that few other F1 weekends can match. Super yachts line the shore as on-lookers watch some of the most advanced machines in the world run a tight and aggressive course with more than its fair share of elevation changes. Well-heeled race fans, celebrities and socialites flock to the south-east coast of France to enjoy a truly legendary weekend of screaming race cars, world-renowned casinos and swanky parties.

Tag Heuer Monaco Grand Prix Watches Watch Releases
Few watch brands have as strong a symbiotic relationship with motorsports as Tag Heuer. Many of their most famous models are tributes to notable elements within the world of motorsport, consider the Camaro, Carrera, Silverstone, Monza, Formula 1, and of course, the Monaco. Tag has made special editions for not only Mercedes but also McLaren, one of the most successful F1 teams of all time. In addition to the manufactures, Tag Heuer has also seen their brand represented by some of F1's best drivers, including Alain Prost, Jenson Button, Lewis Hamilton and Ayrton Senna. Other brands have tried to connect themselves with motorsports but from track day junkies like Steve McQueen, to modern day World Champions like Jenson Button, Tag Heuer has become the reigning watch brand in motorsports. A big marketing campaign success by most accounts.

Tag Heuer Monaco Grand Prix Watches Watch Releases

Tag Heuer celebrated the 2012 Monaco GP by announcing four watches, two limited editions that directly commemorate the Monaco Grand Prix, and the "re-release" of two special editions which were previously only available through Tag Heuer boutiques. Above is the Monaco Calibre 12 ACM Limited Edition (CAW211K) which celebrates the first year of partnership between Tag Heuer and the Automobile Club de Monaco, the group responsible for organizing a series of races throughout Monaco, including the Monaco Gran Prix. Tag Heuer is their official timing partner and thus created this 39mm black dialed Monaco featuring the ACM logo on the dial. The Monaco Calibre 12 ACM will have a production run limited to 1200 units.

Tag Heuer Monaco Grand Prix Watches Watch Releases

Tag Heuer Monaco Grand Prix Watches Watch Releases

Not one to forget their popular Carrera line, Tag Heuer also announced the new Carrera Calibre 16 Day Date Monaco Grand Prix LE (CV2A1F) which will be limited to 3000 units and can be had with a sporty tire tread-inspired rubber strap or a stainless steel bracelet, both of which nicely suit its 43 mm stainless steel case. I have always enjoyed the Carrera line as they feature a very pleasing case and lug design as well as excellent legibility for a chronograph. This new model sports a simplified dial layout and bright red accents for the second hand and elements of the dial and bezel script. It is really ironic that there is now a Tag Heuer Carrera Monaco watch. Nice and confusing right?

Tag Heuer Monaco Grand Prix Watches Watch Releases

Also announced was a duo of bright blue Monacos meant to invoke the memory of Steve McQueen, who wore a Monaco in the 1971 film Le Mans, and has been a considerable factor in the continued popularity of the Monaco line. First, the Monaco Heuer Steve McQueen Calibre 11, a traditional looking blue and white edition of the Monaco that is actually a slightly revised version of a boutique-only model that Tag Heuer announced last year. This is basically a vintage inspired Monaco with bright white racing stripes on the dial and its crown on the left side of the case. Note the use of "Heuer" and not "Tag Heuer" on the dial and the matching blue leather strap. It is fitting that this vintage inspired chronograph wears the Heuer name on its dial as the original Monaco design launched in 1969, some sixteen years before Heuer became Tag Heuer.

Tag Heuer Monaco Grand Prix Watches Watch Releases

Last up is the Monaco Twenty Four McQueen (CAL5111) which is a more modern interpretation of the Monaco form. Featuring a highly detailed dial design, curved crystal and 40.5 mm case, this high end chronograph features an El Primero-based Calibre 36 chronograph movement with an advanced shock absorber system visible at all corners of the dial. This is also a model that is simply seeing a wider release after being a boutique-only offering last year.

 

Tag Heuer Monaco Grand Prix Watches Watch Releases

While pricing has yet to be announced, these special editions are a great way to highlight brand successes and Tag Heuer's strong connections with not only Formula 1, but specifically Monaco and its famous course. Given it's provenance as the first automatic chronograph and its truly iconic design, I am a big fan of the base Monaco models and really enjoy how Tag Heuer has managed to protect the style and aesthetic promoted by original models while still promoting innovation and technology through models like the Monaco Twenty Four McQueen.

Written by James Stacey ( a blog to watch )

SEE OUR TAG HEUER "MONACO GP" COLLECTION HERE

 

 



by DTIME International on 27 July 2016

Hi guys,

Welcome to DTime International. As we know that Noob has been released the newest sub and dssd V7 with lots physical improvements, also they claims that the SA.3135 now become more reliable, no longer issue on broken stem or poor PR. I haven't test the v7, still on shipment process to me. 

Above table is some factories that using SA.3135 and 2836. Now the Noob V7 is also come with two option : "improved" SA.3135 (their claims), and also with A.2836 with $50 price different.

In fact, there are Pro's and Con's on SA.3135 vs A.2836 (cal 3135 look). Before V7 has been released, V6S with A.2836 is more preferable compare to SA.3135 due to the issues. Here I have some points to compare :

LOOKS
There is no doubt on the look, SA.3135 is very similar to genuine with all the detail, this is because SA.3135 was build from scratch, which not using Asian ETA parts such as 2836. 


FUNCTION
Please Note :

  • On Sub with modified A.2836, is Asian 2836 with modification to be closer to genuine Cal.3135 as shown on pics above. 
  • On Sub with SA.3135, is totally build from scratch to copy Calibre 3135

Function wise, there will be significant different especially on crown date and hour hands setting. SA.3135 is following the gen with clockwise setting, and A.2836 is the opposite. Other functions are the same, since this Sub have no chronograph, only date and hands.

PARTS INTERCHANGEABLILITY
This is one of weaknesses from SA.3135. Since it was built from scratch independently, you will have parts availability issue when something happen to this movement. Parts is hard to find and sometimes can not taken from other movement such as Asian 2836. Meanwhile, the A.2836 parts are very easy to find in the market, just because it was just regular movement and have been a while in the market. 

RELIABILITY
Hopefully this V7 is more reliable and less issue compare to V6s which have some issues on broken stem, also sometimes poor PR. A.2836 on the opposite is already establish and reliable since the begining.

CONCLUSION 

  • If you want the closest look and features to genuine sub, you must choose the one with SA.3135 (hope the v7 is more reliable compare to V6s)
  • If you want proven reliability, and cheaper price, you should go for sub with modified A.2836 movements.

It is just simply your taste and choices. 

FIND THE FINEST ROLEX REPLICA HERE



by DTIME International on 08 June 2016

Hi guys, 

I will say finally J Factory made this things even better compare to other factory in my opinion. RO 15400 is one of the icon of Audemars Piguet, as I know there is TF and V6F version of this previously, and I will say JF is just extra ordinary. Let's take a look of my quick look :



The Face

  • Perfect blue color, same like gen
  • The emboss of checkered dial is very close to gen.
  • I have no issue with hands and hour mark, i think very close to gen as well
  • Date font size is ok, but a bit thicker on rep


The Crystal

I was amazed of the crystal on this rep, take a look some pic below :

It's just cool, very clear from every angle, no light distraction

Case & Bracelet :


Since I have TF & V6F, i never found big issue on the case and bracelet. On this JF also i found nothing to comment on this. All good, the finishing is just perfect, very solid bracelet. There is no gap between link, in the end there is no "cheap" sound when you shake it.

Caseback & Movement


Amazing.. I notice that JF put some extra effort on this to make it better compare to other factory. Look at the beauty of decoration, very detail, neat and close to gen. I only found certain minor different as pointed by blinking number above. 

The Dimension 


I found some different thickness between TF, V6F and JF :

  • TF (non-decorated) : 9.79 mm
  • V6F (decorated) : 10.8 mm
  • JF (decorated) : 9.88 mm


What I know gen thickness is 9.8mm, so you can see JF make it very close.

Overall i am happy with this JF. If someone have other opinion or comment, please add here

Cheers guys..

FIND THE BEST AUDEMARS PIGUET REPLICA HERE



by DTIME International on 01 June 2016

After enjoying the black dial green sapphire, now finally my Noob 116400 blue dial has arrived, and here I am sharing my first impression of this timepiece.
My eyes can't move from the dial since the beginning. It just very cool. 

Tried to find gen dial comparison from the internet. Please take a look :

Myself personally can't spot any major flaws on the dial. All good from A to Z, including the blue shiny gradient which moving based on light sources. It is just cool.
To make myself sure, i took some closed up dial pics as below :












I couldn't find any major flaws on the dial. So details, so close to gen. If someone have gen of this piece, please share to me.











What i know the gen is 40.5 mm with 11.5 thickness. Pretty close...

That's it from me guys, please add some point on this to make my short review even better.

Cheers...

FIND THIS BEST REPLICA ONLY AT OUR WEBSITE HERE



by DTIME International on 28 May 2016

Hi guys, now my both PO has arrived, first the Orange bezel (ref : 232.30.46.21.01.002) dan Black bezel (ref : 232.30.46.21.01.001). Let's take a quick look of it :

DIMENSION



While Omega web said that the case diameter is 45.5, these reps is 45 mm
Gen thickness is 16 mm, these reps is 15.68 mm
Pretty much close to gen from the dimension.

THE FACE 





I don't have gen to compare head to head, but i pick pics from gen website, and i guess it's all pretty close. There's no major issue found on this parts. Let's see my other pics below :


 

  • BEZEL MATERIAL : Aluminium polished bezel, very nice finished
  • BEZEL COLOR : Correct orange and black (not too black as other version i guess)
  • BEZEL MARKER : Very neat and clear. I didn't find any issues on this part
  • PEARL : very precise, centered.
  • CROWN SIZE : I found a bit taller compare to gen, but it's not a major issue
  • DIAL MARKER : All good I guess, all similar to gen from my point of view
  • HANDS : No issue
  • DATE WINDOW : good position, however I found the font is a bit bigger on rep
  • LOGO : I did't found a "fat" omega logo as some people says.




BRACELET 


Well polished bracelet, well finishing, very solid when you hold it. There's no "cheapy" sound when you shake it. Also the clasp pretty smooth when I open and close it. 

CASEBACK & MOVEMENT



I think this miyota has been decorated perfectly refer to co-axial 8500. Very detail.

LUME 



color & brightnes have no issue at all. All good.

That's my quick look of these PO, hope someone can tell me more about this reps.

Cheers

FIND THE BEST OMEGA REPLICA ONLY IN OUR WEBSITE HERE



by DTIME International on 04 May 2016

Hi all, I love to see my new BP Le Petit Prince edition. First, I love the dial details. Second, I love the working PR. After closer look, I wanna share how good this timepiece is. Hope you guys love it.

NUMBER 1 : THE FACE / DIAL





Both pics above clearly shows how detail ZF made the dial details. These are some point from my point of view :

  • COLOR : It is just replicated properly, similar to gen dial color. Also I love how ZF made the burst pattern, looks beautiful
  • HANDS : Length & thickness is very close to gen, I didn't found any different.
  • MARKER : Font size is good, thickness is good, frame is good. However i found a little different on number 4, 5, and 8, it's just a small thickness difference.
  • SUB DIAL : The diameter is similar to gen, also the line pattern (see on first pic), just nice.
  • LOGO : I found no issue, very similar to gen
  • LUME : Not too responsive towards light source, need time to absorb, very different with lume on PAM or Rolex noob maker. But the color is correct.
  • CRYSTAL : Very clear AR, good viewing angle. I provide you more pics on this, to see how good the crystal is :






NUMBER 2 : THE CASE


Very good combination of polished and brushed as per genuine. When I hold every side of the case, I didn't find any sharp things that can hurt your finger for some reasons. Same things on its crown, feel good and very neat, also good engraved on crown logo.


Nice engraved, there is none of the thing caused bad feeling while on my wrist. All good

NUMBER 3 : THE STRAP & CLASP


I guess in every reps have some issue on leather straps. Same here, I feel like the brown color is dull, stitching isn't that neat, but dont get me wrong the details is good.


I love the details, I love the engraves, I love the finishing. It is just solid on it. 

NUMBER 4 : THE POWER RESERVE 
I did a test by capturing day by day from the beginning i did manual wind. I just wanna know if the PR working and also the hands is pointing to the right number on the PR dial.



I haven't finish yet, but after I did the test. It is clearly can stay for 72 hours without I wear it. And also look at the hand on PR dial, pointing the right number. It's not 7 days, but I think on reps 72 hours is good enough.

For me it is just a Powerful Good Looking Timepiece....well done to ZF... 

That's it from me guys, please comment and add something more....

Cheers

Read More Of Our Thread at RepGeek HERE

FIND THE BEST IWC SCHAFFHAUSEN REPLICA HERE